|
|
PDF AD4C541 Data sheet ( Hoja de datos )
| Número de pieza | AD4C541 | |
| Descripción | Solid State Relay | |
| Fabricantes | Solid State Optronic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AD4C541 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
AD4C541www.DataSheet4U.com
Dual 1 Form A
Solid State Relay
DESCRIPTION
The AD4C541 is a bi-directional, double-pole, single-throw, normally open solid-state relay. This device consists of two discrete relays in
a compact 8 pin package. Each relay is composed of a AlGaAs LED optically coupled to an IC--driving a pair of source-to-source
enhancement type DMOS transistors. Low on-resistance allows for a high load current rating--making the AD4C541 ideal in applications
where packaging density and high load current requirements present unique design challenges.
FEATURES
• Low On-Resistance (1 ohm MAX)
• Low input control power consumption (2.5mA TYP)
• High load current rating (700mA MAX, single pole)
• High input-to-output isolation (2500V MIN)
• Long life/high reliability
OPTIONS/SUFFIXES*
• -H High Output Isolation
• -S Surface Mount Option
• -TR Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on
device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
• Reed relay replacement
• Meter reading systems
• Medical equipment
• Battery monitoring
• Multiplexers
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control
Voltage
Output Power Dissipation
V
mW
6
800
*The values indicated are absolute stress ratings. Functional operation of the
device is not implied at these or any conditions in excess of those defined in
electrical characteristics section of this document. Exposure to Absolute
Ratings may cause permanent damage to the device and may adversely
affect reliability.
APPROVALS
• UL File # E209132
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 1 of 5
AD4C541
rev 1.40 (10/25/2004)
1 page  
AD4C541www.DataSheet4U.com
Dual 1 Form A
Solid State Relay
DISCLAIMER
Solid State Optronics (SSO) makes no warranties or representations with regards to the completeness and accuracy of this document. SSO
reserves the right to make changes to product description, specifications at any time without further notice.
SSO shall not assume any liability arising out of the application or use of any product or circuit described herein. Neither circuit patent
licenses nor indemnity are expressed or implied.
Except as specified in SSO's Standard Terms & Conditions, SSO disclaims liability for consequential or other damage, and we make no other
warranty, expressed or implied, including merchantability and fitness for particular use.
LIFE SUPPORT POLICY
SSO does not authorize use of its devices in life support applications wherein failure or malfunction of a device may lead to personal injury or
death. Users of SSO devices in life support applications assume all risks of such use and agree to indemnify SSO against any and all
damages resulting from such use. Life support devices are defined as devices or systems which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure to perform when used properly in accordance with instructions for use can be
reasonably expected to result in significant injury to the user, or (d) a critical component in any component of a life support device or system
whose failure can be reasonably expected to cause failure of the life support device or system, or to affect its safety or effectiveness.
© 2004 Solid State Optronics • San José, CA
www.ssousa.com • +1.408.293.4600
Page 5 of 5
AD4C541
rev 1.40 (10/25/2004)
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AD4C541.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AD4C541 | Solid State Relay | Solid State Optronic |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |