|
|
PDF EL32D1 Data sheet ( Hoja de datos )
| Número de pieza | EL32D1 | |
| Descripción | OSCILLATOR | |
| Fabricantes | ECLIPTEK | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EL32D1 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
EL32D1 Series
• RoHS Compliant (Pb-Free)
• LVDS Output Oscillators
• 3.3V supply voltage
• Ceramic 6-pad SMD Package
• Stability to ±25ppm
• Tri-State Output
• Complementary Output
• Available on Tape and Reel
EL32D1
H 2.0
L 7.0
W 5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Differential Output Voltage (VOD)
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
VDD Magnitude Change (DVOD)
Offset Voltage (VOS)
Rise Time / Fall Time
Duty Cycle
Offset Voltage Magnitude Change (DVOS)
Load Drive Capability
Control Voltage (VC)
Control Voltage Range (VCR)
Frequency Deviation
Linearity
Transfer Function
Modulation Bandwidth (MBW)
Input Impedance (ZI)
Typical Phase Noise (Fo = 155.520MHz)
Logic Control/Additional Output
Tri-State Input Voltage
RMS Phase Jitter
Accumulated Period Jitter (tacc)
Period Jitter (trj)
Period Jitter (trms)
Period Jitter (tdj)
Period Jitter (tp-p)
Start Up Time
61.440MHz, 76.800MHz, 80.000MHz, 125.000MHz, 128.000MHz, 155.520MHz, 156.250MHz, 161.1328MHz,
167.3315MHz
0°C to 70°C
-40°C to 85°C
-55°C to 125°C
3.3VDC ±5%
247mV Minimum, 355mV Typical, 454mV Maximum
80mA Maximum
Inclusive of all conditions: Calibration Tolerance at 25°C,
±50ppm or ±25ppm Maximum
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, 1st Year Aging,
Shock, and Vibration
1.43VDC Typical, 1.6VDC Maximum
1.1VDC Typical, 0.9VDC Minimum
-50mV Minimum, +50mV Maximum
1.125V Minimum, 1.20V Typical, 1.375V Maximum
20% to 80% of waveform
1 nSeconds Maximum
at 50% of waveform
50 ±10(%)
50 ±5(%)
25mV Maximum
Between Output and Complementary Output
100 Ohms and 10pF
Test Conditions for Frequency Deviation
Inclusive of Operating Temperature Range, Supply
1.65VDC ±1.65VDC
0.0VDC to VCC +0.5VDC
±75ppm Minimum
Voltage Change, and Output Load Change
20%, 15%, or 10% Maximum
Positive Transfer Characteristic
Measured at -3dB with Contol Voltage of +1.65VDC
10kHz Minimum
50kOhms Typical
at 10Hz Offset
-55dBc/Hz
at 100Hz Offset
-90dBc/Hz
at 1kHz Offset
-120dBc/Hz
at 10kHz Offset
-140dBc/Hz
at 100kHz Offset
-145dBc/Hz
at 1MHz Offset
-148dBc/Hz
Tri-State Enable High / Complementary Output
VIH of 70% of VCC Minimum
No Connection
Enables Output
Enables Output
VIL of 30% of VCC Maximum
FJ = 12kHz to 20MHz
Disables Outputs: High Impedance
0.4pSec Typical, 1 pSec Maximum
Sigma of Total Jitter Distribution
4pSec Typical, 5pSec Maximum
Sigma of Random Jitter
3pSec Typical, 5pSec Maximum
Sigma of Total Jitter Distribution
3pSec Typical, 5pSec Maximum
Deterministic Jitter
4pSec Typical, 10pSec Maximum
Peak to Peak of Jitter Distribution
27pSec Typical, 40pSec Maximum
10mSec Maximum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
EL32D1
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS3Z
REV.DATE
10/07
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet EL32D1.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EL32D1 | OSCILLATOR | ECLIPTEK |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |