|
|
Teilenummer | G3J-T-C |
|
Beschreibung | Solid State Contactor for 3-phase Motors | |
Hersteller | Omron | |
Logo | ||
Gesamt 8 Seiten Solid State Contactor for 3-phase Motors with Built-in Soft Start/Stop and Monitor Output
G3J-T-C
www.DataSheet4U.com
CSM_G3J-T-C_DS_E_2_1
New Models with AC Power Supply Input and
Monitor Output Equivalent to Non-contact
SPST-NO Join the G3J-T Series
• Limiting the starting current saves energy.
• Certified for UL and CSA.
• Mounts with screws or to DIN Track.
• Compact design with heat sinks (3.7-kW models: 100 × 100 ×
130 mm (W × H × D)).
• Built-in snubber circuit and thyristor.
• Built-in operation indicator.
Refer to Safety Precautions for All Solid State
Relays.
Appearance
Output terminals (power supply side)
Input terminals
Operation indicator
Monitor output terminals
Starting torque adjuster (default setting: 200%)
Ramp-up time adjuster (default setting: 1 s)
Ramp-down time adjuster (default setting: 1 s)
Output terminals (load side)
Ordering Information
■ List of Models
Number of Isolation
elements method
3 Phototriac
coupler
Rated power Input method
supply voltage
Applicable monitor capacity
(AC3)
Monitor
output
100 to 240 VAC
No-voltage input 3.7 kW (17.4 A)
(open and short- 2.2 kW (11.1 A)
circuited input) 0.75 kW (4.8 A)
200 to 220 VAC AC
switching
output
12 to 24 VDC
3.7 kW (17.4 A)
2.2 kW (11.1 A)
0.75 kW (4.8 A)
DC
switching
output
Model
G3J-T217BL-C AC100-240
G3J-T211BL-C AC100-240
G3J-T205BL-C AC100-240
G3J-T217BL-C DC12-24
G3J-T211BL-C DC12-24
G3J-T205BL-C DC12-24
■ Accessories (Order Separately)
Mounting Bracket
Model
R99-14 FOR G3J (See note.)
Note: Use this Bracket when mounting Thermal Relay to a G3J-series SSR.
1
Time Chart
Power supply for
internal drive
G3J-T-C
www.DataSheet4U.com
Control input signal
Operation indicator lit
Monitor output
Monitor output operate time
Ramp-up time
Ramp-down time
Monitor output release time
Load current
Rated current
Note: 1. The soft-start time and soft-stop time depend on the load characteristics (e.g., inertia and friction factor) in addition to the starting torque,
ramp-up time, and ramp-down time. Therefore, the soft-start time or soft-stop time will not increase beyond a certain point if the ramp-up
time and ramp-down time are increased.
2. Due to the soft-stop control characteristics, the load current continues flowing even after the motor stops. Set to the optimum value
according to the application.
3. The operation indicator will light synchronized with the monitor output.
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3J-T205BL-C
15.85
G3J-T211BL-C
72
54.5
107.9
34.9
37.1
Input terminals
Three, M3 × 8
50 max.
4.6 dia. Stating torque adjuster
Ramp-up time adjuster
100 max. 90 89
Monitor
output
Two, M3 × 8
Operation
indicator
4.6 × 5.6
Oval hole
5.5
13.2 13.2
80 max.
Output
terminals
Six, M4 × 8
7.6
120 max.
Ramp-down time adjuster
Mounting Hole
Dimensions
Two, 4.5-dia. or
M4 holes
90±0.2
50 ±0.2
6
6 Page | ||
Seiten | Gesamt 8 Seiten | |
PDF Download | [ G3J-T-C Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
G3J-T-C | Solid State Contactor for 3-phase Motors | Omron |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |