Datenblatt-pdf.com


CJ2M-CPU13 Schematic ( PDF Datasheet ) - Omron

Teilenummer CJ2M-CPU13
Beschreibung SYSMAC CJ-series CJ2M CPU Units
Hersteller Omron
Logo Omron Logo 




Gesamt 17 Seiten
CJ2M-CPU13 Datasheet, Funktion
SYSMAC CJ-series CJ2M CPU Units
CJ2M-CPU3@/-CPU1@www.DataSheet4U.com
CSM_CJ2M-CPU3__-CPU1_DS_E_1_2
Since 2001, CJ1M-series PLCs are in
control of a wide variety of
applications worldwide.
The accumulated experience and
advancements in technology now
result in CJ2M; fully compatible, yet
fully new.
• Increased performance, and increased memory capacity
• Up to 40 I/O units on any CPU
• USB for plug-and-play access to the PLC
• All models available with or without Ethernet port
• Choice of serial port plug-in modules
• User-friendly programming, faster debugging
CJ2M-CPU3@
CJ2M-CPU1@
Features
Five variations in program capacity from 5K steps to 60K steps; scale the CPU to your application needs.
Faster processors; LD instruction execution time is reduced to 40 ns, floating point trigonometrics in less than 1 μs.
Faster Function Block calls and execution, faster interrupt handling, less overhead time.
Added execution memory for Function Blocks allows structured, object-oriented programming even in entry-level CPUs.
General-purpose Ethernet port supports EtherNet/IP tag-based data links, connection to Support Software, communications between PLCs,
FTP data transfers, and more (CJ2M-CPU3@).
Standard USB port on all models allows Support Software to connect directly through standard USB cable.
A Serial Option Module can be mounted to add RS-232C or RS-422A/485 communications ports (CJ2M-CPU3@).
Compatible with all existing CJ1 power supply-, I/O-, control- and communication units.
1






CJ2M-CPU13 Datasheet, Funktion
CJ2M-CPU3@/-CPU1@
www.DataSheet4U.com
Item
Logical Ports for
Communications
Logical Ports
Extended Logical
Ports
CIP
Communications
Specification
Class 3 (Connection
Type)
UCMM (Non-
connection Type)
Peripheral (USB) Port
Baud Rate
Transmission Distance
Serial Port
Communications Method
Synchronization Method
Baud Rate
Transmission Distance
EtherNet/IP Port
Media Access Method
Modulation
Transmission Paths
Baud Rate
Transmission Media
Transmission Distance
CJ2M-
CPU11/31
CPU12/32
CPU13/33
CPU14/34
8 ports (Used for SEND, RECV, CMND, PMCR, TXDU, and RXDU instructions.)
64 ports (Used for SEND2, RECV2, CMND2, and PMCR2 instructions.)
CPU15/35
Number of connections: 64
Maximum number of clients that can communicate at the same time: 32
Maximum number of servers that can communicate at the same time: 40
USB 2.0-compliant B-type connector
12 Mbps max.
5 m max.
CJ2M-CPU1@ interface: Conforms to EIA RS-232C.
CJ2M-CPU3@: No serial ports with default system
One of the following Serial Option Boards can be mounted.
CP1W-CIF01 RS-232C Option Board
CP1W-CIF11 RS-422A/485 Option Board (not isolated, max. transmission distance: 50 m)
CP1W-CIF12 RS-422A/485 Option Board (isolated, max. transmission distance: 500 m)
Half-duplex
Start-stop
0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 (kbps)
15 m max.
CSMA/CD
Baseband
Star
100 Mbps (100Base-TX)
Shielded twisted-pair (STP) cable; Categories: 5, 5e
100 m (between hub and node)
Number of Cascade Connections
No restrictions if switching hub is used.
Commu-
nications
CIP Communications: Tag Data Links
Number of Connections
32
Packet Interval (Refresh period)
1 to 10,000 ms (Unit: 0.5 ms)
Can be set for each connection. (Data will be refreshed at the set interval, regardless of the number
of nodes.)
Permissible Communications Band 3,000 pps *5
Number of Registerable Tag
32
Type of Tags
CIO, DM, EM, HR, WR, and Network symboles
Number of Tags per Connection 8 (Seven tags if PLC status is included in the segment.)
Maximum Link Data Size per Node 640 words
Maximum Data Size per Connection
20 words
(Data is synchronized within each connection.)
Number of Registrable Tag Set
32 (1 connection = 1 segment)
Maximum Tag Set Size
20 words (One word is used when PLC status is included in the segment.)
Maximum Number of Tags
Refreshable in a Single Cycle of
CPU Unit *6
Output/send (CPU Unit to EtherNet/IP): 32
Input/receive (EtherNet/IP to CPU Unit): 32
Data Size Refreshable in a Single Output/send (CPU to EtherNet/IP) : 640 words
Cycle of CPU Unit *6
Input/receive (EtherNet/IP to CPU): 640 words
Change of Tag Data Link Parameter
Settings during Operation
OK *7
Multi-cast Packet Filter *8
OK
CIP Communications: Explicit
Messages
Class 3 (Connection Type)
Number of connections: 128
UCMM (Non-connection Type)
Maximum number of clients that can communicate at the same time : 16
Maximum number of servers that can communicate at the same time: 16
CIP Routing
OK
(CIP routing is enabled for the following remote Units: CJ1W-EIP21, CJ2H-CPU6@-EIP, CJ2M-
CPU3@, and CS1W-EIP21.)
FINS Communications
FINS/UDP
OK
FINS/TCP
16 connections max.
EtherNet/IP Conformance Test
Conforms to A5.
EtherNet/IP Interface
10Base-T/100Base-TX
Auto Negotiation/Fixed Setting
6

6 Page









CJ2M-CPU13 pdf, datenblatt
External Interface
CJ2M-CPU3@/-CPU1@
www.DataSheet4U.com
CJ2M-CPU3@ (CJ2M with Built-in EtherNet/IP)
A CJ2M-CPU3@ provides two communications ports for external interfaces: a peripheral (USB) port and an EtherNet/IP port.
Serial ports can be added by mounting a Serial Communications Option Board (sold separately) in an option slot.
Battery Compartment
Simple Backup/Memory Card
Power Supply Switch
Used to back up Memory
Card data or turn OFF the
power when removing the
Memory Card.
Also, press the Memory Card
Power Supply Switch to
perform an easy backup
operation.
Memory Card Connector
Connects the Memory Card
to the CPU Unit.
Memory Card Eject Button
Press the eject button to
remove the Memory Card
from the CPU Unit.
LED Indicators
DIP Switch
(inside the battery compartment)
Memory Card Indicators
Indicates the Memory Card status
(access and power supply).
Peripheral (USB) Port
Connected to Programming Devices,
such as the CX-Programmer
EtherNet/IP Port
Connected to the information management
system such as Host Computer
Option board slot
Add a serial option board (option)
COMM
COMM
CP1W-CIF01
RS-232C
Option Board
CP1W-CIF11/CIF12
RS-422A/485
Option Board
CJ2M-CPU1@
A CJ2M-CPU1@ provides two communications ports for external interfaces: a peripheral (USB) port and a serial port.
Battery Compartment
Simple Backup/Memory Card
Power Supply Switch
Used to back uk Memory
Card data or turn OFF the
power when removing the
Memory Card.
Also, press the Memory Card
Power Supply Switch to
perform an easy backup
operation.
Memory Card Connector
Connects the Memory Card
to the CPU Unit.
Memory Card Eject Button
Press the eject button to
remove the Memory Card
from the CPU Unit.
LED Indicator
DIP Switch
(inside the battery compartment)
Memory Card Indicators
Indicates the Memory Card status
(access and power supply.)
Peripheral (USB) Port
Connected to Programming Device,
such as the CX-Programmer
Built-in Serial Port
Connected to Programming Devices,
Host Computers, general-purpose
external sevice, Programmable
Terminals, and other sevices.
12

12 Page





SeitenGesamt 17 Seiten
PDF Download[ CJ2M-CPU13 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
CJ2M-CPU11SYSMAC CJ-series CJ2M CPU UnitsOmron
Omron
CJ2M-CPU12SYSMAC CJ-series CJ2M CPU UnitsOmron
Omron
CJ2M-CPU13SYSMAC CJ-series CJ2M CPU UnitsOmron
Omron
CJ2M-CPU14SYSMAC CJ-series CJ2M CPU UnitsOmron
Omron
CJ2M-CPU15SYSMAC CJ-series CJ2M CPU UnitsOmron
Omron

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche