AAT2823 Datasheet PDF - Advanced Analogic Technologies
| Part Number | AAT2823 | |
| Description | (AAT2822 - AAT2825) TFT-LCD DC-DC Converter | |
| Manufacturers | Advanced Analogic Technologies | |
| Logo |  |
|
|
There is a preview and AAT2823 download ( pdf file ) link at the bottom of this page. Total 28 Pages | ||
Preview 1 page No Preview Available !
SystemPowerTM
PRODUCT DATASHEET
AAT2822/23/24/25www.DataSheet4U.com
TFT-LCD DC-DC Converter with WLED Driver and VCOM Buffer
General Description
The AAT2822-AAT2825 family of integrated panel power
solutions provides the regulated voltages required by an
active-matrix thin-film transistor (TFT) liquid-crystal dis-
play (LCD). The AAT2822 includes a triple-output DC-DC
converter, a LED backlight driver, and a VCOM buffer in
a 4 mm x 4mm TQFN package. The primary 1.3MHz
DC-DC boost converter uses an ultra-small inductor and
ceramic capacitor to generate output voltage (VAVDD) of
up to 14.5V for the charge pumps. The low on-resistance
of the integrated power MOSFET allows for efficiency up
to 93%.
The two charge pumps independently regulate a positive
output (VGH) and a negative output (VGL). These low-
power outputs use external diode and capacitor stages
to regulate output voltages up to +30V and down to
-30V. A proprietary regulation algorithm minimizes out-
put ripple when using small capacitors.
The high efficiency backlight driver provides a constant
current output capable of boosting up to 28V. The driver
is an ideal power solution for backlight applications with
up to seven white LEDs in series or up to 39 white LEDs
in a parallel and series configuration. LED brightness is
PWM controlled up to 1kHz. Filtered PWM is supported
for higher frequencies.
The high slew rate operational amplifier is suitable for
VCOM buffering and gain adjustment.
The sequencing of the power supplies ensures proper
panel startup and avoid damage to the device.
The AAT2822 family is available in a Pb-free, 24-pin 4 x
4mm TQFN package and operates over the -40°C to
+85°C temperature range.
Features
LCD Bias Power
• 2.5V to 5.5V Input Supply Range
• 1.3MHz Fixed Frequency Current-Mode Step-Up
Regulator
• Fast Transient Response
• Adjustable Voltage up to 14.5V
▪ ±1% Typical Accuracy
• High Efficiency (93%) @ 50mA Output Current
• Small External Inductor and Capacitors
• Integrated Soft Start and Sequencing of All Rails
• Short-Circuit, Over-Voltage, and Over-Temperature
Protection
Positive Output, VGH
• Up to 13.2V Input Supply (VDD)
• Adjustable Voltage up to 30V @ 20mA
▪ ±3% Typical Accuracy
Negative Output, VGL
• Up to 13.2V Input Supply (VDD)
• Adjustable Voltage down to -30V @ 20mA
▪ ± 3% Typical Accuracy
WLED Driver
• Input Voltage Range: 2.5V to 25V
• Maximum Continuous Output:
▪ 12V @ 260mA
▪ 28V @ 50mA
• Panel sizes from 5" – 10"
▪ 5.0" 3S5P
▪ 5.6" 3S6P
▪ 7.0" 3S9P
▪ 8.0" 3S10P/11P
▪ 10" 3S13P
• Constant LED Current with 6% Accuracy
• PWM Dimming Control
▪ Up to 1kHz
• 1.3MHz Switching Fixed Frequency
▪ Up to 90% Efficiency
VCOM Buffer
• High-Performance
▪ 13V/μs Slew Rate
▪ 12MHz, -3dB Bandwidth
• ±75mA Output Short-Circuit Current
• Low 1.5mA Quiescent Current
Applications
• Automotive Displays
• Digital Photo Frames
• Netbooks
• PNDs
2822.2010.02.1.0
www.analogictech.com
1
|
| |
 
SystemPowerTM
PRODUCT DATASHEET
AAT2822/23/24/25www.DataSheet4U.com
TFT-LCD DC-DC Converter with WLED Driver and VCOM Buffer
Part Number Descriptions
Part Number
AAT2822
AAT2822-1
AAT2823
AAT2823-1
AAT2824
AAT2824-1
AAT2825
AAT2825-1
LCD Bias
9
9
9
9
9
9
9
9
Startup Sequence
VAVDD->VGH->VGL
VAVDD->VGL->VGH
VAVDD->VGH->VGL
VAVDD->VGL->VGH
VAVDD->VGH->VGL
VAVDD->VGL->VGH
VAVDD->VGH->VGL
VAVDD->VGL->VGH
Backlight
9
9
9
9
VCOM Buffer
9
9
9
9
Absolute Maximum Ratings1
TA = 25°C unless otherwise noted.
Description
VIN, EN
VDD, OPIN, OUT, OP+, OP-
LX, WLX
WCOMP, COMP, FB, FBP, FBN, REF, WEN, PWM, WFB, OVP
DRVP
DRVN
Value
-0.3 to 7
-0.3 to 15
-0.3 to 30
-0.3 to VIN+0.3
-0.3 to (VDD+0.3)
-0.3 to (VDD+0.3)
Units
V
Thermal Information2
Symbol
ΘJA
PD
TJ
TLEAD
Description
Thermal Resistance3
Maximum Power Dissipation
Operating Junction Temperature Range
Maximum Soldering Temperature (at Leads)
Value
50
2
-40 to 150
300
Units
OC/W
W
°C
1. Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at conditions other than the operating conditions
specified is not implied. Only one Absolute Maximum Rating should be applied at any one time.
2. Mounted on an FR4 board.
3. Derate 20mW/°C above 25°C.
2822.2010.02.1.0
www.analogictech.com
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for AAT2823 electronic component. |
| Information | Total 28 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ AAT2823.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| AAT2820 | The function is Triple-Output Charge Pump Regulator. AAT |  |
| AAT2822 | The function is (AAT2822 - AAT2825) TFT-LCD DC-DC Converter. Advanced Analogic Technologies | |
| AAT2823 | The function is (AAT2822 - AAT2825) TFT-LCD DC-DC Converter. Advanced Analogic Technologies | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
AAT2
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||