|
|
Número de pieza | WSN802G | |
Descripción | 802.11g Wireless Sensor Network Module | |
Fabricantes | RF Micro Devices | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de WSN802G (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! DEVELOPMENT KIT
(Info Click here)
www.DataSheet4U.com
· Small Size, Light Weight, Low Cost
· 7.5 µA Sleep Current Supports Battery Operation
· Timer and Event Triggered Auto-reporting Capability
· Analog, Digital and Serial I/O for Sensor Applications
· -40 to +85 oC Operating Temperature Range
· FCC and ETSI Certified for Unlicensed Operation
The WSN802G transceiver module is a low cost, robust solution for 802.11g sensor
networks. The WSN802G’s very low sleep current makes long life battery operation
practical. The WSN802G module includes analog, digital and serial I/O, providing
the flexibility and versatility needed to serve a wide range of sensor network applica-
tions. The WSN802G module is easy to integrate and is compatible with standard
802.11b/g access points.
WSN802G Absolute Maximum Ratings
Rating
Input/Output Pins Except ADC Inputs
ADC Input Pins
Non-Operating Ambient Temperature Range
Value
-0.5 to +3.63
-0.5 to 1.98
-40 to +85
Units
V
V
oC
WSN802G
802.11g
Wireless
Sensor
Network
Module
WSN802G Electrical Characteristics
Characteristic
Operating Frequency Range
Spread Spectrum Method
RF Chip Rate
RF Data Rates
Modulation Type
Number of RF Channels
RF Channel Spacing
Receiver Sensitivity, 8% PER:
1 Mb/s RF Data Rate
2 Mb/s RF Data Rate
RF Transmit Power
RF Connector
Optimum Antenna Impedance
Sym Notes
Minimum
Typical
Maximum
2401
2474
CCK Direct Sequence
11
1 or 2
BPSK at 1 Mb/s, QPSK at 2 Mb/s
11
5
Units
MHz
Mc/s
Mb/s
MHz
-92
-90
10
U.FL Coaxial Connector
50
dBm
dBm
mW
W
www.RFM.com E-mail: [email protected]
©2009 by RF Monolithics, Inc.
Page 1 of 7
WSN802G - 04/29/09
1 page W S N 8 0 2 G C O u tlin e a n d M o u n tin g D im e n s io n s
1 .0 5 0
0 .0 5 0
0 .0 4 0
15
1
0 .0 3 0
T o p V ie w
0 .9 8 5
www.DataSheet4U.com
16 30
0 .0 5 0
0 .1 2 5
D im e n s io n s in in c h e s
0 .0 9 0
Figure 2
WSN802G Antenna Connector
A U.FL miniature coaxial connector is provided on both WSN802G configurations for connection to the RFIO port.
A short U.FL coaxial cable can be used to connect the RFIO port directly to an antenna. In this case the antenna
should be mounted firmly to avoid stressing the U.FL coaxial cable due to antenna mounting flexure. Alternately,
a U.FL coaxial jumper cable can be used to connect the WSN802G module to a U.FL connector on the host cir-
cuit board. The connection between the host circuit board U.FL connector and the antenna or antenna connector
on the host circuit board should be implemented as a 50 ohm stripline. Referring to Figure 3, the width of this
stripline depends on the thickness of the circuit board between the stripline and the groundplane. For FR-4 type
circuit board materials (dielectric constant of 4.7), the width of the stripline is equal to 1.75 times the thickness of
the circuit board. Note that other circuit board traces should be spaced away from the stripline to prevent signal
coupling, as shown in Figure 4. The stripline trace should be kept short to minimize its insertion loss.
C ir c u it B o a r d S tr ip lin e T r a c e D e ta il
C opper
S tr ip lin e
T ra c e
C opper
G ro u n d
P la n e
F R -4 P C B
M a te r ia l
F o r 5 0 o h m im p e d a n c e W = 1 .7 5 * H
Figure 3
www.RFM.com E-mail: [email protected]
©2009 by RF Monolithics, Inc.
Trace Separation from
50 ohm Microstrip
100 mil
150 mil
200 mil
250 mil
300 mil
Length of Trace Run
Parallel to Microstrip
125 mil
200 mil
290 mil
450 mil
650 mil
Figure 4
Page 5 of 7
WSN802G - 04/29/09
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet WSN802G.PDF ] |
Número de pieza | Descripción | Fabricantes |
WSN802G | 802.11g Wireless Sensor Network Module | RF Micro Devices |
WSN802GCA | 802.11g Wireless Sensor Network Modules | RF Micro Devices |
WSN802GPA | 802.11g Wireless Sensor Network Modules | RF Micro Devices |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |