Datenblatt-pdf.com


PBSS5220V Schematic ( PDF Datasheet ) - NXP Semiconductors

Teilenummer PBSS5220V
Beschreibung 2A PNP low VCEsat (BISS) transistor
Hersteller NXP Semiconductors
Logo NXP Semiconductors Logo 




Gesamt 13 Seiten
PBSS5220V Datasheet, Funktion
PBSS5220V
www.DataSheet4U.com
20 V, 2 A PNP low VCEsat (BISS) transistor
Rev. 01 — 13 June 2005
Product data sheet
1. Product profile
1.1 General description
PNP low VCEsat Breakthrough in Small Signal (BISS) transistor in a SOT666 Surface
Mounted Device (SMD) plastic package.
1.2 Features
s Low collector-emitter saturation voltage VCEsat
s High collector current capability: IC and ICM
s High collector current gain (hFE) at high IC
s High efficiency due to less heat generation
s Smaller required Printed-Circuit Board (PCB) area than for conventional transistors
1.3 Applications
s DC-to-DC conversion
s MOSFET gate driving
s Motor control
s Charging circuits
s Low power switches (e.g. motors, fans)
s Portable applications
1.4 Quick reference data
Table 1: Quick reference data
Symbol Parameter
VCEO collector-emitter voltage
IC collector current (DC)
ICM peak collector current
RCEsat collector-emitter
saturation resistance
Conditions
open base
tp 300 µs
IC = 1 A;
IB = 100 mA
Min Typ Max
- - 20
- - 2
- - 4
- 140 210
Unit
V
A
A
m






PBSS5220V Datasheet, Funktion
Philips Semiconductors
PBSS5220V
www.DataSheet4U.com
20 V, 2 A PNP low VCEsat (BISS) transistor
1000
hFE
800
600
400
200
(1)
(2)
(3)
006aaa426
0
101
1
10
102
103
104
IC (mA)
VCE = 2 V
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = 55 °C
Fig 3. DC current gain as a function of collector
current; typical values
1
VCEsat
(V)
101
102
006aaa428
(1)
(2)
(3)
103
101
1
10
102
103
104
IC (mA)
IC/IB = 20
(1) Tamb = 100 °C
(2) Tamb = 25 °C
(3) Tamb = 55 °C
Fig 5. Collector-emitter saturation voltage as a
function of collector current; typical values
1.0
VBE
(V)
0.8
0.6
0.4
006aaa427
(1)
(2)
(3)
0.2
101
1
10
102
103
104
IC (mA)
VCE = 5 V
(1) Tamb = 55 °C
(2) Tamb = 25 °C
(3) Tamb = 100 °C
Fig 4. Base-emitter voltage as a function of collector
current; typical values
1
VCEsat
(V)
101
006aaa429
102
(1)
(2)
(3)
103
101
1
10
102
103
104
IC (mA)
Tamb = 25 °C
(1) IC/IB = 100
(2) IC/IB = 50
(3) IC/IB = 10
Fig 6. Collector-emitter saturation voltage as a
function of collector current; typical values
9397 750 14936
Product data sheet
Rev. 01 — 13 June 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
6 of 13

6 Page









PBSS5220V pdf, datenblatt
Philips Semiconductors
PBSS5220V
www.DataSheet4U.com
20 V, 2 A PNP low VCEsat (BISS) transistor
13. Data sheet status
Level Data sheet status [1] Product status [2] [3]
I Objective data
Development
II Preliminary data
Qualification
III Product data
Production
Definition
This data sheet contains data from the objective specification for product development. Philips
Semiconductors reserves the right to change the specification in any manner without notice.
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at
URL http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
14. Definitions
Short-form specification — The data in a short-form specification is
extracted from a full data sheet with the same type number and title. For
detailed information see the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with
the Absolute Maximum Rating System (IEC 60134). Stress above one or
more of the limiting values may cause permanent damage to the device.
These are stress ratings only and operation of the device at these or at any
other conditions above those given in the Characteristics sections of the
specification is not implied. Exposure to limiting values for extended periods
may affect device reliability.
Application information — Applications that are described herein for any
of these products are for illustrative purposes only. Philips Semiconductors
make no representation or warranty that such applications will be suitable for
the specified use without further testing or modification.
15. Disclaimers
customers using or selling these products for use in such applications do so
at their own risk and agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to
make changes in the products - including circuits, standard cells, and/or
software - described or contained herein in order to improve design and/or
performance. When the product is in full production (status ‘Production’),
relevant changes will be communicated via a Customer Product/Process
Change Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these products, conveys no
license or title under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that these products are
free from patent, copyright, or mask work right infringement, unless otherwise
specified.
16. Trademarks
Notice — All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Life support — These products are not designed for use in life support
appliances, devices, or systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips Semiconductors
17. Contact information
For additional information, please visit: http://www.semiconductors.philips.com
For sales office addresses, send an email to: [email protected]
9397 750 14936
Product data sheet
Rev. 01 — 13 June 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
12 of 13

12 Page





SeitenGesamt 13 Seiten
PDF Download[ PBSS5220V Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PBSS5220TPNP low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors
PBSS5220V2A PNP low VCEsat (BISS) transistorNXP Semiconductors
NXP Semiconductors

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche