|
|
PDF HMC247 Data sheet ( Hoja de datos )
| Número de pieza | HMC247 | |
| Descripción | 400c ANALOG PHASE SHIFTER 5 - 18 GHz | |
| Fabricantes | Hittite Microwave | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC247 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v01.1007
Typical Applications
The HMC247 is ideal for:
• Fiber Optics
3 • Military
• Test Equipment
Functional Diagram
HMC247www.DataSheet4U.com
400° ANALOG PHASE SHIFTER
5 - 18 GHz
Features
Wide Bandwidth: 5 - 18 GHz
Phase Shift: >400°
Single Positive Voltage Control
Small Size: 2.3 x 1.6 x 0.1 mm
General Description
The HMC247 is an Analog Phase Shifter die which
is controlled via an analog control voltage from 0 to
+10V. The HMC247 provides a continuously variable
phase shift of 0 to 300 degrees at 9 GHz, and 0 to
100 degrees at 18 GHz, with consistent insertion loss
versus phase shift. The phase shift is monotonic with
respect to the control voltage. The control port has a
modulation bandwidth of 50 MHz. The low insertion
loss and compact size enable this part to be used
in a wide range of applications, including the phase
adjustment of clocks in fiber optic systems and test
equipment. All data is measured with the chip in a 50
ohm test fixture, connected via 0.076 mm (3 mil) ribbon
bonds of minimal length <0.31 mm (<12 mils).
Electrical Specifications, TA = +25° C, 50 Ohm System
Phase Shift Range:
Insertion Loss
Parameter
Frequency (GHz)
5 - 10 GHz
10 - 13 GHz
13 - 18 GHz
5 - 10 GHz
10 - 18 GHz
Return Loss (Input and Output)
5 - 18 GHz
Control Voltage Range
Modulation Bandwidth
5 - 18 GHz
5 - 18 GHz
Phase Voltage Sensitivity
5 - 18 GHz
Insertion Phase Temperature Sensitivity
5 - 18 GHz
Min.
180
135
45
Typ.
400
200
120
8
4
8
0 - 10
50
40
0.5
Max.
12
7
Units
degrees
degrees
degrees
dB
dB
dB
Volt
MHz
deg /Volt
deg /°C
3-2
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v01.1007
Assembly Diagram
3
www.DataSheet4U.com
HMC247
400° ANALOG PHASE SHIFTER
5 - 18 GHz
Pad Descriptions
Pad Number Function
1, 2 RFIN
Description
Port is DC blocked.
Interface Schematic
Phase shift control pin. Application of voltage between 0 and 10 volts causes
3 Vctl the transmission phase to change. The DC equivalent circuit is a series con-
nected diode resistor
3-6
4, 5 RFOUT
GND
Port is DC blocked.
The backside of the die must be connected to RF / DC ground.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC247.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC240 | GaAs MMIC SPDT SWITCH DC - 4.0 GHz |  Hittite Microwave Corporation |
| HMC240A | GaAs MMIC SPDT SWITCH | Hittite Microwave Corporation |
| HMC241ALP3E | GaAs MMIC SP4T NON-REFLECTIVE SWITCH |  Analog Devices |
| HMC241AQS16 | GaAs MMIC SP4T NON-REFLECTIVE SWITCH | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |