|
|
Teilenummer | ADC122S051 |
|
Beschreibung | 2 Channel- 500 kSPS 12-Bit A/D Converter | |
Hersteller | National Semiconductor | |
Logo | ||
Gesamt 19 Seiten April 2005
www.DataSheet4U.com
ADC122S051
2 Channel, 500 kSPS 12-Bit A/D Converter
General Description
The ADC122S051 is a low-power, two-channel CMOS 12-bit
analog-to-digital converter with a high-speed serial interface.
Unlike the conventional practice of specifying performance
at a single sample rate only, the ADC122S051 is fully speci-
fied over a sample rate range of 200 kSPS to 500 kSPS. The
converter is based on a successive-approximation register
architecture with an internal track-and-hold circuit. It can be
configured to accept one or two input signals at inputs IN1
and IN2.
The output serial data is straight binary, and is compatible
with several standards, such as SPI™, QSPI™, MICROW-
IRE, and many common DSP serial interfaces.
The ADC122S051 operates with a single supply that can
range from +2.7V to +5.25V. Normal power consumption
using a +3V or +5V supply is 3.0 mW and 10 mW, respec-
tively. The power-down feature reduces the power consump-
tion to just 0.14 µW using a +3V supply, or 0.32 µW using a
+5V supply.
The ADC122S051 is packaged in an 8-lead MSOP package.
Operation over the industrial temperature range of −40˚C to
+85˚C is guaranteed.
Features
n Specified over a range of sample rates.
n Two input channels
n Variable power management
n Single power supply with 2.7V - 5.25V range
Key Specifications
n DNL
n INL
n SNR
n Power Consumption
— 3V Supply
— 5V Supply
+0.7 / −0.4 LSB (typ)
± 0.50 LSB (typ)
72.5 dB (typ)
3.0 mW (typ)
10 mW (typ)
Applications
n Portable Systems
n Remote Data Acquisition
n Instrumentation and Control Systems
Pin-Compatible Alternatives by Resolution and Speed
All devices are fully pin and function compatible.
Resolution
Specified for Sample Rate Range of:
50 to 200 kSPS
200 to 500 kSPS
500 kSPS to 1 MSPS
12-bit
ADC122S021
ADC122S051
ADC122S101
10-bit
ADC102S021
ADC102S051
ADC102S101
8-bit
ADC082S021
ADC082S051
ADC082S101
Connection Diagram
Ordering Information
Order Code
ADC122S051CIMM
ADC122S051CIMMX
ADC122S051EVAL
Temperature Range
−40˚C to +85˚C
−40˚C to +85˚C
TRI-STATE® is a trademark of National Semiconductor Corporation
QSPI™ and SPI™ are trademarks of Motorola, Inc.
© 2005 National Semiconductor Corporation DS201064
20106405
Description
8-Lead MSOP Package
8-Lead MSOP Package, Tape & Reel
Evaluation Board
Top Mark
X06C
X06C
www.national.com
Timing Diagrams
www.DataSheet4U.com
ADC122S051 Operational Timing Diagram
20106451
Timing Test Circuit
20106408
www.national.com
ADC122S051 Serial Timing Diagram
20106450
SCLK and CS Timing Parameters
6
20106406
6 Page Typical Performance Characteristics TA = +25˚C, fSAMPLE = 200 kSPS to 500 kSPS, fSCLK = 3.2
MHz to 8 MHz, fIN = 40.2 kHz unless otherwise stated. (Continued)
www.DataSheet4U.com
SFDR vs. Clock Frequency
SINAD vs. Clock Frequency
20106441
SFDR vs. Clock Duty Cycle
20106446
SINAD vs. Clock Duty Cycle
20106442
SFDR vs. Input Frequency
20106447
SINAD vs. Input Frequency
www.national.com
20106443
12
20106448
12 Page | ||
Seiten | Gesamt 19 Seiten | |
PDF Download | [ ADC122S051 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
ADC122S051 | 2 Channel- 500 kSPS 12-Bit A/D Converter | National Semiconductor |
ADC122S051 | 2 Channel 200 ksps to 500 ksps 12-Bit A/D Converter (Rev. E) | Texas Instruments |
ADC122S051Q-Q1 | ADC122S051 2 Channel 200 ksps to 500 ksps 12-Bit A/D Converter (Rev. E) | Texas Instruments |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |