Datenblatt-pdf.com


EMIF02-MIC02F2 Schematic ( PDF Datasheet ) - STMicroelectronics

Teilenummer EMIF02-MIC02F2
Beschreibung 2-line IPAD EMI filter and ESD protection
Hersteller STMicroelectronics
Logo STMicroelectronics Logo 




Gesamt 8 Seiten
EMIF02-MIC02F2 Datasheet, Funktion
www.DataSheet4U.com
EMIF02-MIC02F2
2-line IPAD™, EMI filter and ESD protection
Features
EMI symmetrical (I/O) low-pass filter
High efficiency in EMI filtering
Lead free package
Very low PCB space consuming:
1.42 mm x 0.92 mm
Very thin package: 0.65 mm
High efficiency in ESD suppression
High reliability offered by monolithic integration
High reducing of parasitic elements through
integration and wafer level packaging
Complies with the following standards
IEC 61000-4-2 level 4 on input pins
– 15 kV (air discharge)
– 8 kV (contact discharge)
IEC 61000-4-2 level 1 on input pins
– 2 kV (air discharge)
– 2 kV (contact discharge)
Applications
Where EMI filtering in ESD sensitive equipment is
required:
Mobile phones and communication systems
Computers, printers and MCU Boards
Description
The EMIF02-MIC02 is a highly integrated devices
designed to suppress EMI/RFI noise in all
systems subjected to electromagnetic
interferences. The EMIF02 Flip Chip packaging
means the package size is equal to the die size.
This filter includes an ESD protection circuitry
which prevents the device from destruction when
subjected to ESD surges up 15 kV.
Flip Chip
(6 bumps)
Figure 1. Pin configuration (bump side)
32
1
I2 GND
I1
A
O2 GND
O1
B
Figure 2. Basic cell configuration
Input
Low-pass Filter
GND
GND
Output
Ri/o = 470 W
Cline = 16 pF
GND
TM: IPAD is a trademark of STMicroelectronics.
April 2008
Rev 3
1/8
www.st.com
8






EMIF02-MIC02F2 Datasheet, Funktion
Ordering information
wEwMwI.FD0a2ta-MShIeCe0t42UF.c2om
Figure 13. Footprint
Copper pad Diameter:
250 µm recommended, 300 µm max
Solder stencil opening: 330 µm
Solder mask opening recommendation:
340 µm min for 300 µm copper pad diameter
Figure 14. Marking
Dot, ST logo
xx = marking
z = manufacturing location
yww = datecode
(y = year
ww = week)
E
xxz
y ww
Figure 15. Flip Chip tape and reel specification
Dot identifying Pin A1 location
4 ± 0.1
Ø 1.5 ± 0.1
1.02
0.73 ± 0.05
All dimensions in mm
4 ± 0.1
User direction of unreeling
5
Note:
Ordering information
Table 3. Ordering information
Order code
Marking
Package
EMIF02-MIC02F2
FJ
Flip Chip
Weight
2.3 mg
Base qty
5000
Delivery mode
Tape and reel 7”
More information is available in the application notes:
AN1235:"Flip Chip: Package description and recommendations for use"
AN1751: “EMI filters: Recommendations and measurements”
6/8

6 Page







SeitenGesamt 8 Seiten
PDF Download[ EMIF02-MIC02F2 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EMIF02-MIC02F22-line IPAD EMI filter and ESD protectionSTMicroelectronics
STMicroelectronics
EMIF02-MIC02F32-line IPAD and EMI filter including ESD protectionSTMicroelectronics
STMicroelectronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche