|
|
Teilenummer | G084SN05-V2 |
|
Beschreibung | Color TFT-LCD Module | |
Hersteller | AUO | |
Logo | ||
Gesamt 26 Seiten Spec. No.:
www.DataSheet4U.com
MDGD084-SN05-2
Version:
0.2
Total pages:
26
Date:
2004- March-15
AU OPTRONICS CORPORATION
Product Functional Specifications
8.4” SVGA Color TFT-LCD Module
Model Name: G084SN05 V.2
Approved by
Martin Sun
Prepared by
Cynthia Lin
GD- MDBU Marketing Division / AU Optronics Croporation
Customer
Checked & Approved by
(C) Copyright AU Optroncis, Inc.
2004 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.2 ver.0.2
1/1
www.DataSheet4U.com
2.0 General Description
This specification applies to the 8.4 inch color TFT LCD module G084SN05 V.2.
This module is designed for display units for Industrial Applications.
The screen format is intended to support the SVGA 800(H) x 600(V) and VGA 640(H) x
480(V) (through internal video scaling) screen and 262k colors (6bits RGB).
Input signals can be either digital 6bit RGB or analog RGB. Reverse scan function can
also be activated through the digital input signal.
The module does not contain an inverter card for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25℃ condition:
Items
Unit Specifications
Screen Diagonal
[mm] 213.4 ( 8.4 ”)
Active Area
[mm] 170.4(H) x 127.8(V)
Pixel H x V
800(x3) x 600
Pixel Pitch
[mm] 0.213(H) x 0.213(V)
Pixel Arrangement
R.G.B. Vertical Stripe
Display Mode
Typical White Luminance (ICFL=6 mA)
Normally White
[cd/m 2] 350 Typ. (center)
Contrast Ratio
350:1 Typ.
Optical Rise Time/Fall Time
[msec] 10/25 Typ.
Nominal Input Voltage VDD
[Volt] +3.3 Typ.
Typical Power Consumption
[Watt] 7.5 Typ
(VDD line + VCFL line)
Weight
[Grams] 310 ±10
Physical Size
[mm] 203(W) x 142.5(H) x 12.5(D)
Electrical Interface
6bit RGB / analog RGB
Support Color
Native 262K colors (RGB 6-bit driver)
Temperature Range
Operating
[℃] 0 to +50
Storage(Shipping)
[℃] -20 to +60
(C) Copyright AU Optroncis, Inc.
2004 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.2 ver.0.2
6/6
6 Page www.DataSheet4U.com
Note 1: Selection of scanning mode (please refer to the following table)
Setting of scancontrol input Input Signal
Scanning direction
REV (No.26 pin)
Lo From up to down, and from left to right
REV (No.26 pin)
Hi From down to up, and from right to left
5.2.2 Analog Input Signal (Connector 3)
Pin No.
Signal Name
Pin No.
1 VGA_HSYNC 2
3 AGNF 4
5 RED_GND 6
7 GREEN 8
9 BLUE
Signal Name
VGA_VSYNC
RED
GREEN_GND
BLUE_GND
5.2.3 Inverter Output Signal (Connector 2)
Pin No.
Signal Name
Pin No.
1 VBL 2
3 DIMMER 4
5 GND
Signal Name
GND
VBLCTRL
5.3 Signal Description
5.3.1 Digital Input Pin Description (Connector 1)
Signal Name
Description
VSS
REV
VDD
GND
VBL
DIMMER
GND
Trigger of reverse scan function
+3.3V Power Supply
Ground
Inverter Power Supply
Brightness of Backlight Control Signal
(C) Copyright AU Optroncis, Inc.
2004 All Right Reserved.
No Reproduction and Redistribution Allowed.
G084SN05 V.2 ver.0.2
12/12
12 Page | ||
Seiten | Gesamt 26 Seiten | |
PDF Download | [ G084SN05-V2 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
G084SN05-V0 | LCD Module | AUO |
G084SN05-V1 | LCD Module | AUO |
G084SN05-V2 | Color TFT-LCD Module | AUO |
G084SN05-V3 | Color TFT-LCD Module | AUO |
G084SN05-V4 | SVGA Color TFT-LCD Module | AUO |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |