Datenblatt-pdf.com


ECH8901 Schematic ( PDF Datasheet ) - Sanyo Semicon Device

Teilenummer ECH8901
Beschreibung PNP Epitaxial Planar Silicon Transistor P-Channel Silicon MOSFET
Hersteller Sanyo Semicon Device
Logo Sanyo Semicon Device Logo 




Gesamt 6 Seiten
ECH8901 Datasheet, Funktion
Ordering number : ENA1472
ECH8901
www.DataSheet4U.com
SANYO Semiconductors
DATA SHEET
ECH8901
Appllications
Charger.
PNP Epitaxial Planar Silicon Transistor
P-Channel Silicon MOSFET
General-Purpose Switching Device
Applications
Features
Composite type, facilitating high-density mounting.
Mounting height 0.9mm.
IECO is guaranteed for preventing reverse ow from the collector to the emitter.
Halogen free compliance.
Specications
Absolute Maximum Ratings at Ta=25°C
Parameter
[TR]
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Base Current
Collector Dissipation
Junction Temperature
Storage Temperature
[FET]
Drain-to-Source Voltage
Gate-to-Source Voltage
Drain Current (DC)
Drain Current (Pulse)
Marking : LA
Symbol
Conditions
VCBO
VCEO
VEBO
IC
ICP
IB
PC
Tj
Tstg
When mounted on ceramic substrate (900mm2×0.8mm) 1unit
VDSS
VGSS
ID
IDP
PW10μs, duty cycle1%
Ratings
Unit
--30
--30
--5
--3
--6
--600
1.3
150
--55 to +150
V
V
V
A
A
mA
W
°C
°C
--12 V
±10 V
--6 A
--40 A
Continued on next page.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not
be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for applications outside the standard
applications of our customer who is considering such use and/or outside the scope of our intended standard
applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
www.semiconductor-sanyo.com/network
21010EA TK IM TC-00002268 No. A1472-1/6






ECH8901 Datasheet, Funktion
ECH8901
--4.5
VDS= --6V
--4.0 ID= --6A
VGS -- Qg
--3.5
--3.0
--2.5
--2.0
--1.5
--1.0
--0.5
0
0 1 2 3 4 5 6 7 8 9 10 11 12
Total Gate Charge, Qg -- nC
IT12955
1.8 PD -- Ta
When mounted on ceramic substrate
1.6 (900mm2×0.8mm)
1.5
1.4
1.3
1.2
1.0
0.8
0.6
T1outnalitDissipation
0.4
0.2
0
0 20 40 60 80 100 120 140 160
Ambient Temperature, Ta -- °C
IT12957
--100
7
5
IDP= --40A
A S Owww.DataSheet4U.com
PW10μs
3
2
1ms
--10
7
ID= --6A
5
3
2
--1.0
7
5
3 Operation in this
DC
10ms
operation1(0T0am=s25°C)
2 area is limited by RDS(on).
--0.1
7
5
3 Ta=25°C
2 Single pulse
--0.01 When mounted on ceramic substrate (900mm2×0.8mm) 1unit
--0.01 2 3 5 7--0.1 2 3 5 7--1.0 2 3 5 7 --10
23
Drain-to-Source Voltage, VDS -- V IT12956
Note on usage : Since the ECH8901 is a MOSFET product, please avoid using this device in the vicinity
of highly charged objects.
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating
condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
Co.,Ltd. products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures
or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give
rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment,
adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but
are not limited to protective circuits and error prevention circuits for safe design, redundant design, and
structural design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be
granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any
third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third
party's intellectual property rights which has resulted from the use of the technical information and products
mentioned above.
This catalog provides information as of February, 2010. Specications and information herein are subject
to change without notice.
PS No. A1472-6/6

6 Page







SeitenGesamt 6 Seiten
PDF Download[ ECH8901 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ECH8901PNP Epitaxial Planar Silicon Transistor P-Channel Silicon MOSFETSanyo Semicon Device
Sanyo Semicon Device
ECH8901PNP Epitaxial Planar Silicon Transistor P-Channel Silicon MOSFETSanyo Semicon Device
Sanyo Semicon Device

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche