E3Z-D82-M1J Datasheet PDF - OMRON
| Part Number | E3Z-D82-M1J | |
| Description | Photoelectric Sensor | |
| Manufacturers | OMRON | |
| Logo |  |
|
|
There is a preview and E3Z-D82-M1J download ( pdf file ) link at the bottom of this page. Total 22 Pages | ||
Preview 1 page No Preview Available !
Photoelectric Sensor with Built-in Amplifier with New Connector Options
E3Z
Compact Sensor Offers Long Sensing
Distance and Superior
Noise-Immunity
D Photo-IC provides long sensing distance: 15 m and
10 m for through-beam, 4 m for retroreflective, and 1 m
for diffuse.
D Integrated Photo-IC improves noise immunity to
interference from inverters and other inductive loads.
D New injection molding technology assures IP67 rating
to withstand water and dust.
D Switch-selectable, Light-ON/Dark-ON operation.
D M8 connector-ready and 2 m, pre-wired models.
D NPN or PNP output models available.
Ordering Information
J Sensors
Stock Note: Shaded models are normally stocked.
Sensing method Light source Appearance
Connection method
Through-beam IR/RED
www.DataSheet4U.com
Polarized
retroreflective
RED
Diffuse
reflective
IR
Pre-wired
Connector
Pigtail 3 pin (M8)
Pigtail 4 pin (M8)
Pigtail 4 pin (M12)
(See Note 2.) Pre-wired
Connector
Pigtail 3 pin (M8)
Pigtail 4 pin (M8)
Pigtail 4 pin (M12)
Pre-wired
Connector
Pigtail 3 pin (M8)
Pigtail 4 pin (M8)
Pigtail 4 pin (M12)
Pre-wired
Connector
Pigtail 3 pin (M8)
Pigtail 4 pin (M8)
Pigtail 4 pin (M12)
Sensing distance
15 m (IR)
10 m (RED)
(See Note 1.)
100 mm to 4 m
100 mm to 3 m
(See Note 3.)
5 to 100 mm
(wide view)
1m
Model
NPN output
E3Z-T61(A)
E3Z-T66(A)
E3Z--T61(A)--M5J
E3Z--T61(A)--M3J
E3Z--T61(A)--M1J
E3Z-R61
E3Z-R66
E3Z--R61--M5J
E3Z--R61--M3J
E3Z--R61--M1J
E3Z-D61
E3Z-D66
E3Z--D61--M5J
E3Z--D61--M3J
E3Z--D61--M1J
E3Z-D62
E3Z-D67
E3Z--D62--M5J
E3Z--D62--M3J
E3Z--D62--M1J
PNP output
E3Z-T81(A)
E3Z-T86(A)
E3Z--T81(A)--M5J
E3Z--T81(A)--M3J
E3Z--T81(A)--M1J
E3Z-R81
E3Z-R86
E3Z--R81--M5J
E3Z--R81--M3J
E3Z--R81--M1J
E3Z-D81
E3Z-D86
E3Z--D81--M5J
E3Z--D81--M3J
E3Z--D81--M1J
E3Z-D82
E3Z-D87
E3Z--D82--M5J
E3Z--D82--M3J
E3Z--D82--M1J
Note: 1.
2.
3.
Model numbers that end with (A) are red LED versions.
The Reflector is sold separately. Select the Reflector model most suited to the application.
Sensing distance can be extended to 4 meters when the E39-R1S reflector is used. The sensing distance is 3 meters when the
E39-R1 reflector is used.
Photoelectric Sensor with Built-in Amplifier E3Z
1
|
| |
 
Specifications
Item Sensing method
NPN output
PNP output
Sensing distance
Standard sensing object
Hysteresis
Directional angle
Light source (wave length)
Power supply voltage
Current consumption
Control output
Circuit protection
Response time
Sensitivity adjustment
Ambient
illumination
(receiver
side)
Incandescent lamp
Sunlight
Ambient
temperature
Operating
Storage
Ambient
humidity
Operating
Storage
Insulation resistance
www.DataSheDeiet4leUc.tcroicmstrength
Vibration resistance
Shock
resistance
Destruction
Enclosure rating
Approvals
Connection method
Indicator
Weight
(packed
state)
Material
Accessories
Pre-wired cable (2 m)
Connector
Through-beam
Polarized retroreflective Diffuse reflective
E3Z-T61/T66 (A)
(Note 3)
E3Z-R61/R66
E3Z-D61/D66
E3Z-D62/D67
E3Z-T81/T86 (A)
(Note 3)
E3Z-R81/R86
E3Z-D81/D86
E3Z-D82/D87
15 m
10 m (A) (Note 3)
100 mm (4 m Note 1)
(when using E39-R1S)
100 mm (3 m Note 2)
(when using E39-R1)
White paper
(100×100 mm):
100 mm
White paper
(300×300 mm):
1m
Opaque: 12 mm
(dia. min.)
Opaque: 75 mm
(dia. min.)
---
--- 20% max. of setting distance
Both emitter and re-
ceiver: 3 to 15°
Infrared LED (870 nm)
2 to 10°
Red LED (660 nm)
---
Infrared LED (860 nm)
12 to 24 VDC ±10% including 10% (p-p) max. ripple
Emitter: 15 mA
Receiver: 20 mA
30 mA max.
100 mA max. at 26.4 VDC, open collector output (residual voltage: 2 V max.)
< 10 mA (residual voltage: 1 V max.)
L-ON/D-ON, switch selectable
Load short-circuit, re-
versed power supply
protection, and output
reverse protection
Reversed power supply connection, output short-circuit, and mutual
interference protection, and output reverse protection
1 ms max.
One-turn potentiometer
3,000 ℓ max.
10,000 ℓ max.
--25°C to 55°C (--13°F to 131°F)
--40°C to 70°C (--40°F to 158°F) with no icing or condensation
35% to 85%
35% to 95% with no condensation
20 MΩ min. at 500 VDC
1,000 VAC, 50/60 Hz for 1 min
10 to 55 Hz, 1.5-mm double amplitude or 300 m/s2 for 2 hours each in X, Y, and Z axes
500 m/s2 3 times each in X, Y, and Z axes
IP67 (IEC60529) 1200 PSI Washdown (NEMA ICS5, ANNEX F)
CE
2 m cable or M8 connector
Operation indicator (orange)
Stability indicator (green)
Emitter has power indicator (orange) only
Approx. 120 g (4.2 oz) Approx. 65 g (2.3 oz)
Approx. 30 g (1.1 oz) Approx. 20 g (0.7 oz)
Case: PBT (polybutylene terephthalate); Lens: Denatured polyallylate
Instruction manual (Order Reflector and Mounting Bracket separately.)
Note: 1. Sensing distance can be extended up to 4 meters when the E39-R1S reflector is used.
2. Sensing distance can be extended up to 3 meters when the E39-R1 reflector is used.
3. Sensing distance is 10 meters when using the (A) versions (visible red LED, 660 nm).
Photoelectric Sensor with Built-in Amplifier E3Z
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for E3Z-D82-M1J electronic component. |
| Information | Total 22 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ E3Z-D82-M1J.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| E3Z-D82-M1J | The function is Photoelectric Sensor. OMRON | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
E3Z-
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||