|
|
Número de pieza | CLS03 | |
Descripción | Switching-Mode Power Supply | |
Fabricantes | Toshiba Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CLS03 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! TOSHIBA Schottky Barrier Diode
CLS03
CLS03
Switching-Mode Power Supply (Secondary-Rectification)
Applications (Low Voltage)
DC/DC Converter Applications
• Forward voltage: VFM = 0.58 V (max)
• Average forward current: IF (AV) = 10 A
• Repetitive peak reverse voltage: VRRM = 60 V
• Suitable for compact assembly due to small surface-mount package:
“L−FLATTM” (Toshiba package name)
Absolute Maximum Ratings (Ta = 25°C)
Unit: mm
②
①
Characteristics
Symbol
Rating
Unit
Repetitive peak reverse voltage
Average forward current
Non-repetitive peak surge current
Junction temperature
Storage temperature range
VRRM
IF (AV)
IFSM
Tj
Tstg
60
10 (Note 1)
100 (50 Hz)
−40~125
−40~150
V
A
A
°C
°C
JEDEC
①① AアNノOーDドE
②② CカAソTーHドODE
⎯
Note 1: Tℓ = 70°C
Rectangular waveform (α = 180°), VR = 30 V
JEITA
TOSHIBA
⎯
3-4F1A
Note 2: Using continuously under heavy loads (e.g. the application of
high temperature/current/voltage and the significant change in
Weight: 0.15 g (typ.)
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating
conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
www.DataSheet4U.com(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Electrical Characteristics (Ta = 25°C)
Characteristics
Peak forward voltage
Peak repetitive reverse current
Junction capacitance
Thermal resistance
(junction to ambient)
Thermal resistance
(junction to lead)
Symbol
VFM (1)
VFM (2)
VFM (3)
IRRM (1)
IRRM (2)
Cj
Rth (j-a)
Rth (j-ℓ)
Test Condition
IFM = 3.0 A (pulse test)
IFM = 5.0 A (pulse test)
IFM = 10 A (pulse test)
VRRM = 5 V (pulse test)
VRRM = 60 V (pulse test)
VR = 10 V, f = 1.0 MHz
Device mounted on a glass-epoxy
board
(board size: 50 mm × 50 mm)
(board thickness: 1.6 t)
(soldering land)
Cathode 5.7 mm × 6.2 mm
Anode 4.5 mm × 3.4 mm
⎯
1
Min Typ. Max Unit
⎯ 0.36 ⎯
⎯ 0.41 ⎯
V
⎯ 0.53 0.58
⎯ 7.0 ⎯ μA
⎯ 0.1 1.0 mA
⎯ 345 ⎯
pF
⎯ ⎯ 100 °C/W
⎯⎯
5 °C/W
2006-11-13
1 page CLS03
RESTRICTIONS ON PRODUCT USE
• The information contained herein is subject to change without notice.
20070701-EN
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
www.DataSheHeat4nUd.bcooomk” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-13
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet CLS03.PDF ] |
Número de pieza | Descripción | Fabricantes |
CLS01 | Switching-Mode Power Supply | Toshiba Semiconductor |
CLS02 | Switching-Mode Power Supply | Toshiba Semiconductor |
CLS03 | Switching-Mode Power Supply | Toshiba Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |