Datenblatt-pdf.com


ACT8309 Schematic ( PDF Datasheet ) - Active-Semi

Teilenummer ACT8309
Beschreibung (ACT8309 - ACT8311) PWM Step-Down DC/DCs
Hersteller Active-Semi
Logo Active-Semi Logo 




Gesamt 10 Seiten
ACT8309 Datasheet, Funktion
Active-Semi
ACT8309/8310/8311
Rev PrA, 24-Jan-08
Advanced Product Information – All Information Subject to Change
1.5A, PWM Step-Down DC/DCs in TDFN
FEATURES
Multiple Patents Pending
Up to 95% High Efficiency
Up to 1.5A Guaranteed Output Current (ACT8311)
1.35MHz Constant Frequency Operation
Internal Synchronous Rectifier Eliminates
Schottky Diode
ACT8309: Up to 900mA
ACT8310: Up to 1.2A
ACT8311: Up to 1.5A
100% Duty Cycle Low-Dropout Operation
0.1µA Shutdown Current
Small TDFN33-8 Package
RoHS-Compliant
Independent Enable/Disable Control
Minimal External Components
APPLICATIONS
Wireless Handhelds
Portable Devices
GPS/PND equipment
GENERAL DESCRIPTION
The patent-pending ACT8309/ACT8310/ACT8311
are current-mode, fixed-frequency PWM, synchro-
nous step-down DC/DC converters that are capable
of delivering 1.5A with efficiency of up to 95%.
These devices operate with a fixed frequency of
1.35MHz, minimizing noise in sensitive equipment
as well as optimizing both efficiency and component
size and cost.
These devices feature very low-resistance power
MOSFET and 100% duty cycle operation, making
them ideal choices for portable applications requir-
ing a 3.0V or 3.3V rail to be generated from a Li+
battery.
The ACT8311 is capable of supplying up to 1.5A of
output current, while the ACT8309 and ACT8310
are capable of supplying up to 900mA and 1.2A,
respectively. All three devices have adjustable out-
put voltages that are programmable down to 1.2V.
Contact Active-Semi for custom fixed output voltage
availability.
www.DataSheet4U.com
SYSTEM BLOCK DIAGRAM
2.7V to 5.0V
ON
OFF
Power-OK
Output
IN Active-Semi SW
ACT8311
EN FB
POK
GP G
VOUT
Up to 1.5A
Pb-free
Innovative Products. Active Solutions.
-1-
www.active-semi.com
Copyright © 2008 Active-Semi, Inc.






ACT8309 Datasheet, Funktion
Active-Semi
ACT8309/8310/8311
Rev PrA, 24-Jan-08
FUNCTIONAL DESCRIPTION
The patent-pending ACT8309/ACT8310/ACT8311
are current-mode, fixed-frequency PWM, synchro-
nous step-down DC/DC converters that are capable
of delivering up to 1.5A (ACT8311) with efficiency of
up to 95%. These devices feature very low-
resistance power MOSFETs and 100% duty cycle
operation, making them ideal choices for portable
applications requiring a 3.0V or 3.3V rail to be gen-
erated form a Li+ battery. These device operate
with a fixed frequency of 1.35MHz, minimizing noise
in sensitive equipment as well as optimizing both
efficiency and component size and cost.
100% Duty Cycle Operation
These devices are capable of operating at up to
100% duty cycle operation. During 100% duty cycle
operation, the high-side power MOSFET is held on
continuously, providing a direct connection from the
input to the output (through the inductor), ensuring
the lowest possible dropout voltage in battery-
powered applications.
Synchronous Rectification
The ACT8309/ACT8310/ACT8311 each feature
integrated n-channel synchronous rectifiers, maxi-
mizing efficiency and minimizing the total solution
size and cost by eliminating the need for external
rectifiers.
Soft-Start
The ACT8309/ACT8310/ACT8311 each include
www.DaitnaStehgereat4tUed.comsoft-start circuitry. When enabled, the
output voltage track an internal 200µs soft-start
ramp so that the output power up in a controlled,
monotonic manner that is independent of loading.
Compensation
The ACT8309/ACT8310/ACT8311 each utilize cur-
rent-mode control and a proprietary internal compen-
sation scheme to simultaneously simplify external
component selection and optimize transient perform-
ance over their full operating range. No compensation
design is required, simply follow a few simple guide-
lines described below when choosing external com-
ponents.
Capacitor Selection
The input capacitor reduces peak currents and
noise induced upon the voltage source. A 10µF
ceramic capacitor is recommended for most appli-
cations.
For most applications, a 22µF ceramic output ca-
pacitor is recommended. Although the these regula-
tors were designed to take advantage of the bene-
fits of ceramic capacitors, namely small size and
very-low ESR, low-ESR tantalum capacitors can
provide acceptable results as well.
Inductor Selection
These devices were optimized for operation with
3.3µH inductors, although inductors in the 1.5µH to
4.7µH range may be used. Choose an inductors
with a low DC-resistance, and avoid inductor satu-
ration by choosing inductors with DC ratings that
exceed the maximum output current of the applica-
tion by at least 30%.
Output Voltage Setting
Figure 3 shows the feedback network necessary to
set the output voltage when using adjustable output
voltage options. output voltage options. Select com-
ponents as follows: Set RFB2 = 200k, calculate
RFB1 using the following equation:
RFB1
=
RFB2
⎜⎜⎝⎛
VOUT
VFB
1⎟⎟⎠⎞
Where VFB is 0.8V.
Figure 3:
Output Voltage Setting
VOUT
ACT8309/
ACT8310/
ACT8311 FB
RFB1
RFB2
Enable/Disable Control
These devices may be enabled and disabled using
the EN input. Drive EN to a logic-high to enable the
regulator, drive EN to a logic-low to disable the
regulator. When disabled, each regulator’s quies-
cent supply current drops to less than 1µA.
Power-OK Output (POK)
These devices feature an open-drain “Power-OK”
indicator output. This output sinks current whenever
the output voltage is (typically) 5% below the regu-
lation voltage, and goes high-impedance when the
output voltage is above this threshold. To generate
Innovative Products. Active Solutions.
-6-
www.active-semi.com
Copyright © 2008 Active-Semi, Inc.

6 Page







SeitenGesamt 10 Seiten
PDF Download[ ACT8309 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
ACT8309(ACT8309 - ACT8311) PWM Step-Down DC/DCsActive-Semi
Active-Semi

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche