DataSheet.es    


PDF DSHG-01 Data sheet ( Hoja de datos )

Número de pieza DSHG-01
Descripción Pilot Operated Directional Valves
Fabricantes Yuken　
Logotipo Yuken Logotipo



Hay una vista previa y un enlace de descarga de DSHG-01 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! DSHG-01 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
Pub. EC-0404
SOLENOID CONTROLLED PILOT
OPERATED DIRECTIONAL VALVES
DSHG-01/03/04/06/10
PILOT OPERATED DIRECTIONAL VALVES
DHG/04/06/10
DIRECTIONAL
MANUALLY OPERATED
CONTROLS
DIRECTIONAL VALVES
DMG-01/03/04/06/10
DMT-03/06/10
General Information
Up to 31.5 MPa (4570 PSI), 1100L/min (291 U.S.GPM)
Solenoid contorolled Pilot Operated Valves ............................ Page 4
Thease valves are composed of a solenoid operated pilot valve and a pilot
operated slave valve. When a solenoid is energised the pilot valve directs the
flow to move the spool of the slave valve, thus changing the direction of flow
in the hydraulic circuit.
High Pressure High Flow
In these valves, the nominal size "04" can provide 300 L/min (79.3 U.S.GPM),
"06" can provide 500 L/min (132 U.S.GPM) and "10" can provide 1100 L/min
(291 U.S.GPM) in the maximum flow respectivelyand theycan alsowithstand
such a high pressure as 31.5 Mpa {4570 PSI} as the maximum operating
pressure. With these features of high pressure and high flow, the valves can
make the size or configuration of the equipment compact.
E
Low Pressure Drop
As the pressure drop of each size of the valve becomes minimal, the more of
energy saving of the equipment is possible.
Easy Change of Pilot and Drain System
The change of the pilot from external to internal and the change of the drain
from internal to external or viceversa can be done easily by putting on or
removing the relevant plug on the valve.
Pilot Operated Directional Valves
............................ Page
34
These valves perform a change over of spool by
hydraulic pilot and shift the direction of oil flow.
XPY
Manually Operated Directional Valves
............................ Page
40
These valves may be used to manually shift the spool
position and change the direction of oil flow.
No.1

1 page




DSHG-01 pdf
www.DataSheet4U.com
Solenoid Controlled Pilot Operated
Directional Valves
DSHG-01/03/04/06/10
S-DSHG-04/06/10
Solenoid Ratings / Sub-plates
DIRECTIONAL
CONTROLS
Solenoid Ratings
Valve Type
Electric source
Standard
Type
AC
Shockless
Type
DC (K Series)
AC → DC Rectified (R)
Coil
Type
A100
A120
A200
A240
D12
D24
D48
R100
R200
Frequency
(Hz)
50
60
50
60
50
60
50
60
50/60
Voltage (V)
Current & Power at Rated Voltage
Source Rating Serviceable Range Inrush (A) Holding (A) Power (W)
100 80 - 110 2.42 0.51
100 90 - 120 2.14 0.37
110 2.35 0.44
96 - 132 2.02 0.42
120
108 - 144 1.78 0.31
200 160 - 220 1.21 0.25
200 1.07 0.19
220 180 - 240 1.18 0.22
192 - 264 1.01 0.21
240
216 - 288 0.89 0.15
12 10.8 - 13.2
2.45
24 21.6 - 26.4
1.23 29
48 43.2 - 52.8
0.61
100 90 - 110
200 180 - 220
0.33
29
0.16
Inrush current in the above table show rms values at maximum stroke.
E
The coil type numbers in the shaded column are handled as optional extras.
In case these coils are required to be chosen, please confirm the time of
delivery with us before ordering.
CSA Approved Solenoid Valve
The "DSHG" series valve have been approved by the
CSA(Candian Standards Association). consult us for details.
Sub-plates
Valve
Model
Numbers
Japanese Standard "JIS"
Sub-plate
Model Numbers
Thread
Size
Approx.
Mass
kg (1bs.)
European Design Standard
Sub-plate
Model Numbers
Thread
Size
Approx.
Mass
kg (1bs.)
N. American Design Standard
Sub-plate
Model Numbers
Thread
Size
Approx.
Mass
kg (1bs.)
DSGM-01-30 Rc 1/8 0.8 (1.8) DSGM-01-3080 1/8 BSP.F 0.8 (1.8) DSGM-01-3090 1/8 NPT 0.8 (1.8)
DSHG-01 DSGM-01X-30 Rc 1/4 0.8 (1.8) DSGM-01X-3080 1/4 BSP.F 0.8 (1.8) DSGM-01X-3090 1/4 NPT 0.8 (1.8)
DSGM-01Y-30 Rc 3/8 0.8 (1.8)
DSGM-01Y-3090 3/8 NPT 0.8 (1.8)
DSGM-03-40 Rc 3/8 3.0 (6.6) DSGM-03-2180 3/8 BSP.F 3.0 (6.6) DSGM-03-2190 3/8 NPT 3.0 (6.6)
DSGM-03X-40 Rc 1/2 3.0 (6.6) DSGM-03X-2180 1/2 BSP.F 3.0 (6.6) DSGM-03X-2190 1/2 NPT 3.0 (6.6)
DSHG-03
DSGM-03Y-40 Rc 3/4 4.7 (10.4) DSGM-03Y-2180 3/4 BSP.F 4.7 (10.4) DSGM-03Y-2190 3/4 NPT 4.7 (10.4)
DHGM-03Y-10 Rc 3/4 4.7 (10.4) DHGM-03Y-1080 3/4 BSP.F 4.7 (10.4) DHGM-03Y-1090 3/4 NPT 4.7 (10.4)
DHGM-04-20 Rc 1/2 4.4 (9.7) DHGM-04-2080 1/2 BSP.F 4.4 (9.7) DHGM-04-2090 1/2 NPT 4.4 (9.7)
DSHG-04
DHGM-04X-20 Rc 3/4 4.1 (9.0) DHGM-04X-2080 3/4 BSP.F 4.1 (9.0) DHGM-04X-2090 3/4 NPT 4.1 (9.0)
DHGM-06-50 Rc 3/4 7.4 (16.3) DHGM-06-5080 3/4 BSP.F 8.5 (18.7) DHGM-06-5090 3/4 NPT 7.4 (16.3)
DSHG-06
DHGM-06X-50 Rc 1 7.4 (16.3) DHGM-06X-5080 1 BSP.F 8.5 (18.7) DHGM-06X-5090 1 NPT 7.4 (16.3)
DHGM-10-40 Rc 1-1/4 21.5 (47.4) DHGM-10-4080 1-1/4 BSP.F 21.5 (47.4) DHGM-10-4090 1-1/4 NPT 21.5 (47.4)
DSHG-10
DHGM-10X-40 Rc 1-1/2 21.5 (47.4) DHGM-10X-4080 1-1/2 BSP.F 21.5 (47.4) DHGM-10X-4090 1-1/2 NPT 21.5 (47.4)
DSGM-03∗ is available only for Internal pilot-Internal drain type (Use DHGM-03Y for other valves).
Sub-plates are available. Specify the sub-plate model number from the table above.
When sub-plates are not used, the mounting surface should have a good machined finish.
No.5

5 Page





DSHG-01 arduino
www.DataSheet4U.com
Solenoid Controlled Pilot Operated
Directional Valves
DSHG-04 / S-DSHG-04
List of Standard Models and Maximum Flow
Three Positions
Spring Centred
Spool Type
Graphic Symbol
AB
a
b
Y PT
Maximum Flow
L /min (U.S.GPM)
Model Numbers
10 MPa 16 MPa 25 MPa 31.5 MPa
(1450 PSI) (2320 PSI) (3630 PSI) (4570 PSI)
DSHG-04-3C2 300 (79.3) 300 (79.3) 200 (52.8) 145 (38.3)
"2"
(S-)DSHG-04-3C2 300 (79.3) 250 (66.1) 120 (31.7) 110 (29.1)
"3" DSHG-04-3C3 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3)
DSHG-04-3C4 300 (79.3) 300 (79.3) 250 (66.1) 165 (43.6)
"4"
(S-)DSHG-04-3C4 300 (79.3) 300 (79.3) 140 (37.0) 110 (29.1)
DSHG-04-3C40 300 (79.3) 300 (79.3) 200 (52.8) 145 (38.3)
"40"
(S-)DSHG-04-3C40 300 (79.3) 250 (66.1) 120 (31.7) 110 (29.1)
"5" DSHG-04-3C5 250 (66.1) 250 (66.1) 245 (64.7) 245 (64.7)
DIRECTIONAL
CONTROLS
"6" DSHG-04-3C6 300 (79.3) 260 (68.7) 245 (64.7) 235 (62.1)
DSHG-04-3C60
"60" 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3)
(S-)DSHG-04-3C60
"7" DSHG-04-3C7 300 (79.3) 300 (79.3) 200 (52.8) 145 (38.3)
"9" DSHG-04-3C9 300 (79.3) 300 (79.3) 280 (74.0) 250 (66.1)
DSHG-04-3C10 300 (79.3) 300 (79.3) 200 (52.8) 150 (39.6)
"10"
(S-)DSHG-04-3C10 300 (79.3) 250 (66.1) 120 (31.7) 110 (29.1)
"11" DSHG-04-3C11 300 (79.3) 260 (68.7) 160 (42.3) 140 (37.0)
DSHG-04-3C12 300 (79.3) 280 (74.0) 170 (44.9) 135 (35.7)
"12"
(S-)DSHG-04-3C12 300 (79.3) 250 (66.1) 120 (31.7) 110 (29.1)
Two Positions
No-Spring
Spring Offset
Spool Type
Graphic Symbol
AB
a
b
Maximum Flow
L /min (U.S.GPM)
Y PT
Model Numbers
10 MPa 16 MPa 25 MPa 31.5 MPa
(1450 PSI) (2320 PSI) (3630 PSI) (4570 PSI)
Graphic Symbol
AB
b
Y PT
Model Numbers
Maximum Flow
L /min (U.S.GPM)
10 MPa 16 MPa 25 MPa 31.5 MPa
(1450 PSI) (2320 PSI) (3630 PSI) (4570 PSI)
"2" (S-)DSHG-04-2N2 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) (S-)DSHG-04-2B2 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3)
"3" DSHG-04-2N3 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) DSHG-04-2B3 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3)
"4" (S-)DSHG-04-2N4 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) (S-)DSHG-04-2B4 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3)
"40" (S-)DSHG-04- 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) (S-)DSHG-04-2B40 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3)
"7"
2N40
300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3) DSHG-04-2B7 300 (79.3) 300 (79.3) 300 (79.3) 300 (79.3)
Notes:1. Max flow described above shown value at pilot pressure more than 0.8 MPa (120 PSI).
2. Max. flow in the table above represents the value in the flow condition of P → A → B → T (or
P → B → A → T) as shown in the circuit diagram right.
In case the valve is used in the condition that either A or B port is blocked, the maximum flow
differs according to a hydraulic circuit, therefore, please consult us for details.
AB
ab
PT
E
No.11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet DSHG-01.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DSHG-01Pilot Operated Directional ValvesYuken
Yuken
DSHG-03Pilot Operated Directional ValvesYuken
Yuken
DSHG-04Pilot Operated Directional ValvesYuken
Yuken
DSHG-06Pilot Operated Directional ValvesYuken
Yuken

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar