|
|
PDF EP1500 Data sheet ( Hoja de datos )
| Número de pieza | EP1500 | |
| Descripción | User Manual | |
| Fabricantes | Behringer | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EP1500 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Users Manual
Version 1.3 August 2003
1 page  
EUROPOWER
+www.DataSheet4IUf .cthoem unit is damaged, please do NOT return it to
BEHRINGER, but notify your dealer and the shipping
company immediately. Otherwise, claims for damage
or replacement may not be granted.
EP1500/EP2500
Please make sure the unit is provided with sufficient ventilation,
and never place your EUROPOWER amp on top of other heat-
emanating equipment or in the vicinity of a heater to avoid the risk
of overheating.
The mains connection is made via the enclosed power cord
and a standard IEC receptacle. It meets all international safety
certification requirements.
+ Please make sure that all units have a proper ground
connection. For your own safety, never remove or
disable the ground conductor from the unit or the
AC power cord.
ATTENTION!
+ We would like to bring your attention to the fact
that extremely loud sound levels may damage your
hearing as well as your loudspeakers. Please lower
both GAIN controls leftwards before powering up
the unit. Be sure to keep the volume at an
appropriate level.
2. CONTROL ELEMENTS
Since control elements of both the EP1500 and the EP2500 are identical, we have used the EP1500 as the model represented in the
illustrations to assure simplicity.
2.1 Front panel
Fig. 2.1: Front panel control elements
The main switch is used to power up the amp.
+ Please take note: Merely switching the unit off does
not mean that it is fully disconnected from the
mains. When not using the unit for prolonged
periods of time, please unplug the units power cord
from the power outlet.
Ventilation openings are located at the front of the unit, so
that hot air is prevented from being trapped inside the unit,
thus causing faulty operation or even damage.
The CLIP LED lights up when the signal is distorted. Should
distortion occur, reduce the input level, so that the CLIP
LED stops lighting up.
The SIGNAL LED lights up as long as a signal is present
at the input.
The GAIN control (channels 1 and 2) is used for setting
up the input gain.
The POWER LED lights up as soon as the unit is powered
up.
2.2 Rear panel
Fig. 2.2: Rear panel control elements
These are the balanced XLR inputs (channels 1 and 2).
These are the stereo 1/4" TRS inputs (channels 1 and 2).
They can also be used with unbalanced plugs.
These are the MODE switches, used to alter the operating
modes as well as to set the limiters and high-pass filters
(see chapter 2.3).
The units fan is located here. Fan speed adjusts
automatically to assure trouble-free operation.
2. CONTROL ELEMENTS
5
5 Page 
www.DataSheet4U.com
EUROPOWER EP1500/EP2500
5. SPECIFICATIONS
PVUQVUÃQPX@S
20 Hz - 20 kHz @ 0.1% THD, both channels driven:
8 Ω per channel
4 Ω per channel
1 kHz @ 0.1% THD, both channels driven:
8 Ω per channel
4 Ω per channel
2 Ω per channel
Bridged Mono:
8 Ω, 20 Hz - 20 kHz, 0.1% THD
8 Ω, 1 kHz, 0.1% THD
4 Ω, 1 kHz, 1% THD
9DTUPSUDPI
AS@RV@I8`ÃS@TQPIT@
(at 10 dB below rated output power)
96HQDIBÃA68UPS
IPDT@ÃrvturqÃ!ÃCÃÃ!ÃxC
WPGU6B@ÃB6DI
DIQVUÃT@ITDUDWDU`ÃWÃSHTÃ(@ 8 Ω)
DIQVUÃDHQ@96I8@
8PIUSPGT
Front:
Rear:
DI9D86UPST
8PII@8UPST
Inputs:
Outputs
8PPGDIB
6HQGDAD@SÃQSPU@8UDPI
GP69ÃQSPU@8UDPI
PVUQVUÃ8DS8VDUÃU`Q@
QPX@SÃTVQQG`
Mains voltage
Breaker
Mains connector
Power consumption
9DH@ITDPITX@DBCU
Dimensions (H x W x D)
Weight
@Q $
@Q!$
260 W
400 W
450 W
650 W
280 W
450 W
700 W
500 W
750 W
1200 W
800 W
1300 W
900 W
1500 W
1400 W
2400 W
< 0.01%
< 0.02%
20 Hz - 20 kHz, +0/-1 dB
5 Hz - 50 kHz (at -3 dB points)
> 300 @ 8 Ω
-100 dB
40 x (32 dB)
50 x (34 dB)
1.15 V (+3.4 dBu)
1.23 V (+4.0 dBu)
10 kΩ (unbalanced), 20 kΩ (balanced)
Power switch, gain control (channels 1 and 2)
DIP switches (10 x)
POWER: green LED
CLIP: red LED, 1 per channel
SIGNAL: yellow LED, 1 per channel
Balanced XLR and 1/4" TRS connectors
“Touch-Proof” binding posts and Neutrik Speakon®
Continuously variable speed fan, back-to-front air flow
Full short circuit, open circuit, thermal and HF protection
Stable into reactive or mismatched loads
Turn-on/off muting, AC coupling
Class AB complementary linear
output
Class H complementary linear output
USA/Canada 120 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
General export model 120/230 V~, 50 - 60 Hz
8 A 200 - 230 V
15 A 100 - 120 V
Standard IEC receptacle
3.5 A (230 V~, 50 Hz)
5 A (230 V~, 50 Hz)
6.7 A (120 V~, 60 Hz)
9.6 A (120 V~, 60 Hz)
approx. 3 1/2" (88 mm) x 19" (482.6 mm) x 15 4/5" (402 mm)
approx. 15.7 kg (34.6 Ibs)
approx. 16.6 kg (36.6 Ibs)
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the
specifications and design of the device may differ from the information given in this manual.
5. SPECIFICATIONS
11
11 Page | ||
| Páginas | Total 12 Páginas | |
| PDF Descargar | [ Datasheet EP1500.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EP1500 | User Manual | Behringer |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |