DataSheet39.com

What is PE43701?

This electronic component, produced by the manufacturer "Peregrine Semiconductor", performs the same function as "(PE43x0x) 5-bit RF Digital Attenuator".


PE43701 Datasheet PDF - Peregrine Semiconductor

Part Number PE43701
Description (PE43x0x) 5-bit RF Digital Attenuator
Manufacturers Peregrine Semiconductor 
Logo Peregrine Semiconductor Logo 


There is a preview and PE43701 download ( pdf file ) link at the bottom of this page.





Total 6 Pages



Preview 1 page

No Preview Available ! PE43701 datasheet, circuit

9380 Carroll Park Drive • San Diego, CA 92121, USA
PE43X0X DSA
EVK User's Guide
Tel: 858-731-9400 • Fax: 858-731-9499 • www.psemi.com
PE43X0Xwww.datasheet4u.com Digital Step Attenuator Evaluation Kit User’s Guide
Introduction
The Digital Step Attenuator (DSA) Evaluation Kit
is designed to evaluate Peregrine Semiconductor
DSA products using the parallel (LPT1) port on
PC. The DSA Evaluation Software enables
flexible evaluation in parallel, serial and serial-
addressable programming modes.
Hardware Setup
1. Verify contents of the Evaluation Kit. The
shipped EVK should contain the following:
a. One (1) PE43X0X Evaluation Board
b. One (1) Ribbon Cable Harness
The EVB setup and hardware programming
settings are described below:
Figure 1. DSA Evaluation Board
De-embedding Trace
AUTOMATED
PARALLEL
ATTENUATION
CONTROL
PARALLEL/
SERIAL
SELECT
SUPPLY VOLTAGE
VDD = +3.3V
VDD
OPEN
GND
J1
RFin
DUT
GND
ADD
VDD
J2
Supported Products:
PE43501
PE43502
PE43503
PE43601
PE43602
PE43701
PE43702
PE43703
PE43204
Supported Platforms:
PC
Supported Operating Systems:
Windows
MANUAL
PARALLEL
ATTENUATION
CONTROL
SERIAL
ADDRESS
LINES
GND
LATCH ENABLE
DATA
CLOCK
SERIAL
DATA
LINES
VSS VOLTAGE
(PE43703 Only)
RFout
Supporting Document for 78-0012-01 www.psemi.com
©2008 Peregrine Semiconductor Corp. All rights reserved.
For applications support, please email [email protected]
Page 1 of 6

line_dark_gray
PE43701 equivalent
PE43X0X DSA
EVK User's Guide
Serial and Serial-Addressable Mode Programming
Serial and Serial-Addressable Mode programming is enabled by positioning the Parallel/Serial (P/S) select
switch on the EVK board to the right position. Program 8.00dB of Attenuation to the PE43602 and PE43701
wwaws.dasthasohweent4ub.ecolomw:
Figure 7. Serial Programming Window
Figure 8. Serial-Addressable Programming
Window
Supporting Document for 78-0012-01 www.psemi.com
©2008 Peregrine Semiconductor Corp. All rights reserved.
For applications support, please email [email protected]
Page 5 of 6


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for PE43701 electronic component.


Information Total 6 Pages
Link URL [ Copy URL to Clipboard ]
Download [ PE43701.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
PE43701The function is RF Digital Attenuator 7-bit. Peregrine SemiconductorPeregrine Semiconductor
PE43701The function is (PE43x0x) 5-bit RF Digital Attenuator. Peregrine SemiconductorPeregrine Semiconductor
PE43702The function is RF Digital Attenuator 7-bit. Peregrine SemiconductorPeregrine Semiconductor

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

PE43     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search