|
|
Número de pieza | DS1833 | |
Descripción | 5V EconoReset | |
Fabricantes | Dallas Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DS1833 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.DataSheet4U.com
www.dalsemi.com
DS1833
5V EconoReset
FEATURES
Automatically restarts microprocessor after
power failure
Maintains active-high reset for 350 ms after
VCC returns to an in-tolerance condition
Accurate 5%, 10% or 15% microprocessor 5V
power supply monitoring
Reduces need for discrete components
Precision temperature-compensated voltage
reference and voltage sensor
Low-cost TO-92 package or surface mount
SOT-223 package
Internal 5k pull-up resistor
Operating temperature of -40°C to +85°C
PIN ASSIGNMENT
DALLAS
DS1833
123
123
TO-92 PACKAGE
See Mech.
Drawings Section
1
24 3
SOT-223 PACKAGE
See Mech.
Drawings Section
PIN DESCRIPTION
PIN 1
Ground
PIN 2
Reset
PIN 3
PIN 4
VCC
Ground (SOT-223 only)
DESCRIPTION
The DS1833 EconoReset uses a precision temperature compensated reference and comparator circuit to
monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal
power fail signal is generated which forces reset to the active (high) state. When VCC returns to an in-
tolerance condition, the reset signal is kept in the active state for approximately 350 ms to allow the
power supply and processor to stabilize.
OPERATION - POWER MONITOR
The DS1833 provides the functions of detecting out-of-tolerance power supply conditions and warning a
processor-based system of impending power failure. When VCC is detected as out-of-tolerance, as
defined by the tolerance of the part selected, the RST signal is asserted. On power-up, RST is kept active
for approximately 350 ms after the power supply has reached the selected tolerance. This allows the
power supply and microprocessor to stabilize before RST is released.
1 of 5
112099
1 page ECONORESET SELECTION GUIDE
www.DataSheet4U.com
5V
3.3V
DS1233-15
DS1233-10
DS1233-5
DS1233D-15
DS1233D-10
DS1233D-5
DS1833-15
DS1833-10
DS1833-5
DS1233A-15
DS1233A-10
VCC TRIP POINT
MIN
TYP
MAX
4.0 4.125 4.24
4.25 4.375 4.49
4.5 4.625 4.75
4.0 4.125 4.24
4.25 4.375 4.49
4.5 4.625 4.75
4.0 4.125 4.24
4.25 4.375 4.49
4.5 4.625 4.75
2.64 2.72 2.80
2.8 2.88 2.97
DS1833
PUSHBUTTON DETECT
MIN TYP MAX
2.4 -
3.3
2.4 -
3.3
2.4 -
3.3
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
N/A N/A
1.8 -
3.0
1.8 -
3.0
5 of 5
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet DS1833.PDF ] |
Número de pieza | Descripción | Fabricantes |
DS1830 | Reset Sequence Pushbutton | Dallas Semiconductor |
DS1830A | Reset Sequence Pushbutton | Dallas Semiconductor |
DS1831 | Multisupply Micromonitor | Maxim Integrated Products |
DS1831A | Multisupply Micromonitor | Maxim Integrated Products |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |