|
|
Número de pieza | RF600D | |
Descripción | RF / IR Encoder / Decoder Chipset RF Evaluation Boards | |
Fabricantes | rfsolutions | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RF600D (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
No Preview Available ! RF / IR Encoder / Decoder Chipset
RF Evaluation Boards,
RF600E
RF600D
• Highly Secure
Protocol
• RF Encoder & Decoder IC’s
• Simple to Use
• Stand Alone Operation
• Achieves Maximum Range from RF Modules
• 1 – 4 Switch Options (15 states)
•www.DataSheet4U.coDmecoder Serial Output
• Led Indication of Transmission
• Directly Compatible with Keeloq Decoder
• Easy Learn Feature of Transmitters
• Sleep Mode
• Up to 48 Transmitters can be Learned
• Optimum Range:
⇒ AM up to 100m
⇒ FM up to 200m
⇒ IR up to 20m
• Compatible with RF Solutions Systems
Typical Applications
• General Purpose Remote Control
• Automotive alarm systems
• Gate and garage openers
• Electronic door locks
• Identity tokens
• Burglar alarm systems
Encoder
• 2.0-6.6V operation
• Automatic Battery Level Monitor
• ‘Manchester’ modulation
• 8 pin DIP/SOIC package
Description
The RF Solutions RF600E, & RF600D are easy to use
encoder and decoder I/C’s. They have been designed to
achieve the maximum possible range from any radio / Infra
Red transmitter receiver set.
Unlike other encoder /decoder devices the RF600E/600D
provide an unprecedented level of security which prevents
copying or grabbing whist also obtaining optimum range
from the transmitter and receiver.
The devices are very easy to use and can be inserted
directly into a circuit. The RF600D has an easy learn
feature enabling it to learn up to 7 unique RF600E encoder
devices in standalone mode or up to 48 encoder devices
when used in conjunction with an external EEPROM.
These devices enable a simple but secure remote
telemetry application whilst obtaining the maximum range
from the radio set.
18
27
RF600E
36
45
Decoder
• 18 pin DIP/SOIC package
• 4 Digital Outputs (15 States)
• Asynchronous serial interface
• 4.5V – 5.5V operation
1 18
2 17
3 16
4 15
5 RF600D 14
6 13
7 12
8 11
9 10
DS600-9 Sept ‘04
©2004 Reg. No. 227 4001, ENGLAND
Page 1
1 page RF / IR Encoder / Decoder Chipset
RF Evaluation Boards,
RF600E
RF600D
Serial Data Format
Serial Data is sent as a stream of ASCII characters at 9.6K baud. The character format is 8 data bits
with 1 stop bit, no parity.
A serial data string is output every time a valid transmitter packet is received. Due to the nature of
the KeeLoq packet there will be a min gap between each serial data string of 150mSec.
10 characters are sent with the following format;
www.DataSheet4U.com
7 6 5 4 32
1 A(a) $ 0D $0A 10 bytes of data transmitted
Line feed (last character)
Carriage return
Transmitter button information
with battery status
Transmitter serial number
Output from SD1 pin
The Transmitter Serial Number : is made up of 7 ASCII characters from the following group: 0 1 2
3 4 5 6 7 8 9 A B C D E F. The most significant serial number digit is transmitted first. This provides
a total of 28million possible serial numbers.
The KeeLoq Button Status is transmitted as an ASCII character in the range A to O or if the low battery
bit is asserted (encoder battery is low) then in the range a to o. KeeLoq data bits S0, S1, S2 and S3 then
make up the ASCII byte least significant bits D0, D1, D2 and D3.
If a single encoder button is pressed, say S0, then character A will be sent (or if low battery, a).
If encoder button S1 is pressed then B (or b) will be sent.
If S0 and S1 are both pressed simultaneously then character C (or c) will be sent.
If all KeeLoq encoder buttons are simultaneously pressed then character O (or o) will be sent.
Examination of the ASCII bit patterns shows that this allows single or multiple encoder button presses to
be decoded by the ASCII receiving device.
Examples of Serial Data output:
For a three button keyfob with serial number 2345678, the serial data output when encoder transmission
is decoded would be as follows:
If S1 is pressed: 2345678A (2345678a if the battery voltage in the transmitter is low)
If S2 is pressed: 2345678B (2345678b if the battery voltage in the transmitter is low)
If S1 and S2 are pressed together: 2345678C (2345678c if the battery voltage in the transmitter is low)
If S4 is pressed: 2345678H (2345678h if the battery voltage in the transmitter is low)
DS600-9 Sept ‘04
©2004 Reg. No. 227 4001, ENGLAND
Page 5
5 Page RF / IR Encoder / Decoder Chipset
RF Evaluation Boards,
RF600E
RF600D
Technical Specifications: Absolute Maximum Ratings
Item
Rating
Units
Supply voltage
-0.3 to 6.9
V
Input voltage
-0.3 to VDD + 0.3
V
Output voltage
-0.3 to VDD+ 0.3
V
Max output current
25 mA
Storage temperature
-55 to +125
°C (Note)
Lead soldering temp
www.DataSheet4UE.cSoDm rating
300
4000
°C (Note)
V
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.
RF600E Transmitter Encoder
Electrical Characteristics
Operating current(avg)
Vdd = 2 - 3V
Vdd = 3 - 6.6V
Standby current
High level Input voltage
Low level input voltage
High level output voltage
Low level output voltage
LED sink current
Min
0.55VDD
0.3
0.7VDD
0.15
Typical
0.3
0.7
0.1
1.0
Max
1.2
1.6
1.0
VDD+0.3
0.15VDD
0.08VDD
4.0
Unit
mA
µA
V
V
V
V
mA
RF600D Receiver Decoder
Electrical Characteristics
Operating current(avg)
Vdd = 3V
Vdd = 5V
Standby current
High level Input voltage
Low level input voltage
High level output voltage
Low level output voltage
Output Pin Current rating
LED sink current
Momentary Output min Time of operation
Min
.45 Vdd
Vss
Vdd-0.7
350
Typical
1.8
1.8
1.0
Max
3.3
3.3
Vdd
.2Vss
0.6
2
Unit
mA
µA
V
V
V
V
mA
mA
mS
RF600E / 600D System Characteristics
Electrical Characteristics
Time from RF600E input operation to RF600D
Output asserted
Time from RF600E input released to RF600D
Output released
Min
140
Typical
135
210
Max
210
300
Unit
mS
mS
DS600-9 Sept ‘04
©2004 Reg. No. 227 4001, ENGLAND
Page 11
11 Page |
Páginas | Total 24 Páginas | |
PDF Descargar | [ Datasheet RF600D.PDF ] |
Número de pieza | Descripción | Fabricantes |
RF6001 | FRACTIONAL-N RF SYNTHESIZER WITH MODULATOR AND DIGITAL IF FILTER | RF Micro Devices |
RF6001PCBA | FRACTIONAL-N RF SYNTHESIZER WITH MODULATOR AND DIGITAL IF FILTER | RF Micro Devices |
RF600D | RF / IR Encoder / Decoder Chipset RF Evaluation Boards | rfsolutions |
RF600E | RF / IR Encoder / Decoder Chipset RF Evaluation Boards | rfsolutions |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |