DataSheet39.com

What is DM1800-916MN?

This electronic component, produced by the manufacturer "RF Monolithics", performs the same function as "Transceiver Module".


DM1800-916MN Datasheet PDF - RF Monolithics

Part Number DM1800-916MN
Description Transceiver Module
Manufacturers RF Monolithics 
Logo RF Monolithics Logo 


There is a preview and DM1800-916MN download ( pdf file ) link at the bottom of this page.





Total 4 Pages



Preview 1 page

No Preview Available ! DM1800-916MN datasheet, circuit

Preliminary
®
Field Node with Host Serial Interface
Compatible with RFM miniMESHTM Network Protocol
3 V, Very Low Current Operation
Ready-to-Use OEM Module
The DM1800-916MN is the 916.50 MHz field node module in the DM1800 family of RF transceiv-
ers. The DM1800 family is designed for adding embedded wireless connectivity to a wide range of
monitoring and control systems. The DM1800-916MN is equipped with a serial I/O port to interface
to a host microcontroller. The module also includes an analog input, a logic input, and a logic out-
www.DataSheept4uUt f.ocromonitoring and control. Radio communications range in an “open field” environment is typi-
cally 200 meters/hop. The DM1800-916MN combines RFM’s very low current ASH radio tech-
nology with low power microcontroller technology to achieve long battery life. This module is com-
patible with RFM’s miniMESHTM network protocol, which provides add-on “plug-and-play” multicast
mesh network routing. The DM1800-916MB is certified for operation under FCC 15.249 regulations.
DM1800-
916MN
916.50 MHz
Transceiver
Module
Absolute Maximum Ratings
Rating
All Input/Output Pins Except VIN
Non-Operating Ambient Temperature Range
Electrical Characteristics
Characteristic
Operating Frequency
Modulation Type
RF Encoded Data Transmission Rate
Average Receiver Input Current, No External Power Supply Load
Receiver Input Signal for 10-3 BER, 25 °C
Peak Transmitter Input Current, No External Power Supply Load
Peak Transmitter Output Power
Analog Input Measurement Range (10-bit ADC)
Source Impedance to Analog Input
Digital In Logic High
Digital In Logic Low
Digital Out Logic High, No Load
Digital In Logic Low, No Load
Digital Output Source Current, 1K load
Digital Output Sink Current, 1K load
Serial Port Data Rate
Power Supply Input Voltage Range, 40 to +85 oC
Power Supply Input Voltage Range, 0 to +85 oC
Regulated Power Supply Output Voltage, VIN 3.1 to 14 V
Regulated Power Supply Voltage Ripple
Value
-0.3 to +3.3
-50 to +100
Units
V
oC
Sym
fO
Notes
Minimum
916.30
IR
ITP
PO
0
2.4
2.4
VIN
VIN
VOUT
3.1
2.6
Typical
OOK
4.8
4
-98
1
1.1
1.2
9.6
3.0
Maximum
916.70
Units
MHz
13.5
VOUT
10
.45
0.3
14
14
10
kb/s
mA
dBm
mA
mW
V
K
V
V
V
V
mA
mA
kb/s
V
V
Vdc
mVP-P
1


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for DM1800-916MN electronic component.


Information Total 4 Pages
Link URL [ Copy URL to Clipboard ]
Download [ DM1800-916MN.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
DM1800-916MBThe function is Transceiver Module. RF MonolithicsRF Monolithics
DM1800-916MNThe function is Transceiver Module. RF MonolithicsRF Monolithics
DM1800-916MRThe function is Transceiver Module. RF MonolithicsRF Monolithics

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

DM18     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search