|
|
PDF ABJ5xxxxx Data sheet ( Hoja de datos )
| Número de pieza | ABJ5xxxxx | |
| Descripción | High Environmental Resistance | |
| Fabricantes | Nais | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ABJ5xxxxx (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
HIGH ENVIRONMENTAL
RESISTANCE
ABJ1,2,3,4,5
TURQUOISE
SWITCHES
J TYPE (ABJ)
Dust protected type
www.DataSheet4U.com
(Mounting hole
2.3mm .091inch type)
Immersion protected type
(wire leads bottom type)
(Mounting hole
2.3mm .091inch type)
Immersion protected
(wire leads side type)
Long stroke type
FEATURES
• Ultra-miniature size (12.8×6.5×6 mm) (.504×.256×.236 inch)
• Sealed construction for use in adverse environment-Sealed construc-
tion by epoxy resin and rubber cap keeps off the cause of miscontact
such as dust. Conforming to IP67* of IEC protective construction clas-
sification
• Elastomer double molding technology, an industry first and ultrasonic
swaging technology contribute to uniform sealing in high production
quantities
• UL/CSA approved
• Long stroke type is available
Since the repeatability is excellent and the play distance (overtrabel) from the
operating position is ample, the task of performing the adjustments during in-
stallation is an easy one.
• Operating position accuracy ±0.4 mm ±.016 inch
• Overtravel= Min. 2.0 mm .079 inch
As wide range of high pressure is achieved, a stable reliability is ensured
TYPICAL APPLICATIONS
• Industrial use video jack
• Automotives (ex. Device for opening and shutting of automobile doors)
*Based on the protective construction classification of IEC, items which satisfy
the test requirements are denoted with an IP designation.
ORDERING INFORMATION
Ex. ABJ 1 4 1 0 4 0
Type of
switch
Size of mounting hole
Terminal
Contact
arrangement
Actuator
Operating force by
pin plunger (max.)
ABJ:
Turquoise
switch
J type
1: 1.2 mm (.047 inch)
2: 2.3 mm (.091 inch)
3: 3 mm (.118 inch)
4: Fixed pin
(right side pin) type
5: Fixed pin
(left side pin) type
4: Solder terminal
5: PC board terminal
6: Wire leads (bottom type)
7: Wire leads (right side type)
8: Wire leads (left side type)
1: SPDT
2: SPST-NC
3: SPST-NO
0: Pin plunger
2: Hinge lever
4: Simulated roller lever
6: Roller lever
8: Leaf lever
L: Long stroke type
4: 1.23 N {125 gf}
6: 1.96 N {200 gf}
7: 2.45 N {250 gf}
(Long stroke type only)
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
Contact
0: Silver-alloy
1: Gold-clad
17
1 page  
ABJ1,2,3,4,5
2. Characteristics
Mechanical life
(O.T.: Specified value)
Leaf lever, Long stroke type
Wire leads (right & left side type)
Other types
Electrical life at rated load
(O.T.: max.)
Silver alloy contact type
Gold-clad contact type
Insulation resistance
Dielectric strength
Between non-continuous terminals
Between each terminal and other exposed metal parts
Between each terminal and ground
Vibration resistance (Pin plunger type)
Shock resistance (Pin plunger type)
www.DataSheeCt4onUt.accotmresistance (Initial)
Silver contact type
Gold clad contact type
Allowable operating speed (at no load)
Max. operating cycle rate (at no load)
Ambient temperature
Ambient humidity
Unit weight
Min. 5×105 (at 60 cpm)
Min. 3×105 (at 60 cpm)
Min. 106 (at 60 cpm)
Min. 3×104 (at 60 cpm)
Min. 105 (at 20 cpm)
Min. 100 MΩ (at 500 V DC insulation resistance meter)
600 Vrms
1,500 Vrms
1,500 Vrms
10 to 55 Hz at single amplitude of 0.75 mm (Contact opening max. 1 msec.)
Min. 294 m/s2{30 G} (Contact opening max. 1 msec.)
Dust protected type (IP50): Max. 50 mΩ
Immersion protected type (IP67): Max. 100 mΩ
(By voltage drop 1 A 6 to 8 V DC)
Dust protected type (IP50): Max. 100 mΩ
Immersion protected type (IP67): Max. 150 mΩ
(By voltage drop 0.1 A 6 to 8 V DC)
1 to 500 mm/sec.
Other type: 120 cpm
Long stroke type: 60 cpm
–40°C to +85°C –40°F to +185°F
Max. 95% R.H.
Approx. 0.5 g .018 oz (IP50 type)
3. Operating characteristics
Operating force / Release force / Pretravel
Type of actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Leaf lever
Long stroke type
Operating force, Max.
1.23N {125gf}
1.96N {200gf}
0.39N {40gf}
0.64N {65gf}
0.39N {40gf}
0.64N {65gf}
0.39N {40gf}
0.64N {65gf}
0.98N {100gf}
1.27N {130gf}
2.45N {250gf}
Release force, Min
0.15N {15gf}
0.25N {25gf}
0.029N {3.0gf}
0.049N {5.0gf}
0.029N {3.0gf}
0.049N {5.0gf}
0.029N {3.0gf}
0.049N {5.0gf}
0.20N {20gf}
0.29N {30gf}
0.19N {20gf}
Pretravel, Max. mm
inch
0.6 .024
3.0 .118
3.0 .118
3.0 .118
6.0 .236
—
Movement differential / Overtravel / Operating position
Type of actuator
Pin plunger
Hinge lever
Simulated roller lever
Roller lever
Leaf lever
Long stroke type
( ): Low force type
Movement
differential,
Max. mm inch
0.12 .005
0.5 .020
0.5 .020
0.5 .020
1.0 .039
0.5 .020
Overtravel,
Min. mm inch
0.25 .010
0.5 .020
0.5 .020
0.5 .020
2.5 .098
2.0 .079
Operating position, mm inch
Mounting hole:
1.2 .047
Mounting hole:
2.3 .091
Mounting hole:
3.0 .118
5.5±0.2 .217 ± .008 7.0±0.2 .276 ± .008
—
6.8±1.0 .286 ± .039 8.3±1.0 .327 ± .039
—
9.8±1.0 .386 ± .039 11.3±1.0 .445 ± .039
—
13.1 ±1.0 .516 ± .039 14.6±1.0 .575 ± .039
—
— — 16.0±2.0 .630 ± .079
— 2.5±0.4 .098 ± .016 —
DIMENSIONS
1. Dust protected type
1-(1) PC board terminal
Pin plunger
5.4±0.3
0.213±.012
Pretravel 0.6Max.
.024Max
1.5 dia
.059 dia
5.0±0.15
.197±.006
Operating Position
1.0 5.5±0.2
0.0394 .217±.008
1.5±0.1
.059±.004
0.9
.035
2+0.12
-0
dia.
.079
+.005
-0
6.5±0.1
.256±.004
5.08±0.15 5.08±0.15
.200±.006 .200±.006
12.8±0.15
.504±.006
5.50
.217
6-C 0.3
6-C .012
1.6
.063
1.1±0.12
.043±.005
1.5±0.12
.059±.005
4.4
.173
6
.236
t=0.4
.016
1.25±0.12
.049±.005
mm inch General tolerance: ±0.25 ±.010
1.2±0.05 dia.
.047±.002 dia.
5.08±0.1 5.08±0.1
.200±.039 .200±.039
Pretravel, Max. mm inch
Movement differential, Max. mm inch
Overtravel, Min. mm inch
Operating
position
Distance from mounting
hole, mm inch
Distance from stand-off,
mm inch
0.6 .024
0.12 .005
0.25 .010
5.5±0.2
.217 ± .088
7±0.3
.276 ± .012
21
5 Page 
HIGH ENVIRONMENTAL
RESISTANCE
ABS1,4,5
TURQUOISE
SWITCHES
S TYPE (ABS)
www.DataSheet4U.com
FEATURES
• Subminiature size (19.8×11.1×6.4 mm) (.780×.437×.252 inch)
• Sealed construction for use in adverse environment-Sealed construction by ep-
oxy resin and rubber cap keeps off the cause of miscontact such as dust. Con-
forming to IP67* of IEC protective construction classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• UL/CSA/VDE/SEMKO approved
(AS for gold-clad twin layer, VDE and SEMKO are not approved.)
*Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
TYPICAL APPLICATIONS
• Automotives
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cookingrange, water vallet)
ORDERING INFORMATION
Ex. ABS 1 1 1 0 4 0
Type of
switch
Wire and
terminal position
Terminal
Contact
arrangement
Actuator
Operating force by
pin plunger (max.)
ABS:
1: Straight type
Turquoise switch 4: Right angle
S type
5: Left angle
1: .110 quick-connect
terminal
4: Solder terminal
5: PC board terminal
6: Wire leads
1: SPDT
2: SPST-NC
3: SPST-NO
0: Pin plunger
1: Short hinge lever
2: Hinge lever
3: Long hinge lever
4: Simulated roller lever
6: Roller lever
8: Leaf lever
3: 0.74 N {75 gf}
(Gold-clad double
and triple layer
only)
4: 0.98 N {100 gf}
5: 1.47 N {150 gf}
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. As for wire position:
Contact
0: Silver-alloy
1: Gold-clad
triple layer
4: Gold-clad
double layer
Straight type
Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
27
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet ABJ5xxxxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ABJ5xxxxx | High Environmental Resistance | Nais |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |