|
|
PDF CAP300 Data sheet ( Hoja de datos )
| Número de pieza | CAP300 | |
| Descripción | 300W Low Profile Switching Power Supply | |
| Fabricantes | Cherokee | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CAP300 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
CAP300 Series
Product Features:
300 Watt Low Profile Switching Power Supply with 1-4 Outputs
Single & Multiple Output Models
Universal AC Input Range with Active PFC
Remote On/Off, Remote Sense, Margin & Power Good Signals
No Minimum Load Requirements
Meets VDE/FCC Class “B” EMI
Over-Voltage, Over-Current, Over-Temperature
& Over-Power Protection Features
Full Safety Certifications
www.DataSheet4U.com
FEATURES
PFC Compliant to EN61000-3-2
Input protection per EN61000-4
Margining on V1 & V2
Economical
Flexibility with options
BENEFITS
Supports global use of power supply
Designed to operate in harsh environmental conditions
Ability to compensate for system voltage drops
Lowered system costs
Custom capability without NRE & long lead-times
KEY MARKET SEGMENTS & APPLICATIONS
Automation Equipment
Gaming Application
Point of Sale Equipment
Networking / Datacom
Industrial Applications
Computer Peripherals
Test Equipment
SPECIFICATIONS
Input Voltage Range
Inrush Current (Cold Start)
Input Current
Input Protection
EMI
Efficiency
Maximum Output Power
Total Power Over-Load Limit
Voltage Adjustment Range
Regulation
Output Ripple & Noise
Over Voltage Protection
Over Current Limit
Hold-Up Time
Transient Response
Status & Control Signals
Operating Temperature
Shock & Vivration
Dimensions
Safety Approvals
300 Watt Low Profile Switching Power Supply with 1-4 Outputs
Universal AC Input (85-264VAC; 47-63Hz)
35A @ 115VAC, 70A @ 230VAC typical
5.0A max. (at 90VAC)
Single fuse (6.3A, 250VAC / HB Type)
FCC and VDE Level “B” (Conducted)
70% typical (measured at full load)
300 Watts Continuous
Set at 360W typical by sensing the primary input current
+/-5% of V1 / V2 only, V3/ V4 are fixed
+/- 2% max of V1 / V2 / V3, V4 is +/-4%
1% pk-pk maximum @ 20MHz
Trip point set at 120% - 130% of V1 or V2. To reset, cycle input power
110 - 135% of max Iout. Output recovers when the fault is removed
20ms at full load, low line for V1, V2 and V3. 3ms on V4
Peak deviation of ± 3% with a 25% step load change at 3A/μs slew rate
Remote Sense (Compensates 5% of V1 & V2 only), Remote on/off (TTL Low or Short = Off, Open Collector), Input Power Fail (TTL High
for normal operation, goes low >4ms before loss of regulation), DC Good Signal (TTL High for normal operation, Open Collector)
0~50ºC. Derates linearly from 50ºC to 70ºC at 2.5% per ºC, 25 CFM Required for Full Power
Per MIL STD-810E per 516.4 Part IV
9.00 x 4.95 x 1.77”
UL 1950, CSA 22.2 No. 950 & 234, TUV (EN60950), CE Mark & CB Report
Output Configurations
Standard Options Table
MODEL
V1 OUTPUT
V2 OUTPUT
V3 OUTPUT
V4 OUTPUT
Description
Call-Out
Dimensions
CAP300F1
CAP300T2
12V @ 22A
5V @ 45A
12V @ 4A
With vented top cover
With End-Mount Fan-Cover
CAP300xxC 9.00 x 4.95 x 1.77”
CAP300xxG 10.10 x 4.95 x 2.50”
CAP300B3
CAP300D3
3.3V @ 45A
3.3V @ 40A
3.3V @ 25A
5V @ 25A
12V @ 3A
12V @ 10A
With Top-Mounted Fan-Cover CAP300xxF 9.05 x 4.95 x 1.95”
With IEC-320 Inlet & Switch CAP300xxL 10.50 x 4.95 x 1.77”
CAP300R3
CAP300N3
CAP300T3
3.3V @ 45A
5V @ 40A
3.3V @ 45A
5V @ 25A
12V @ 12A
12V @ 12A
12V @ 3A
12V @ 6A
12V @ 6A
Add 5VSB @ 200mA
48VDC (36-72 vdc) Inout
CAP300xxK 9.00 x 4.95 x 1.77”
DAP300xx 9.00 x 4.95 x 1.77”
CAP300E4
3.3V @ 45A
5V @ 25A
24V @ 4A
12V @ 2A
CAP300H4
5V @ 40A
3.3V @ 25A
12V @ 10A
12V @ 3A
CAP300K4
5V @ 40A
12V @ 12A
12V @ 6A
5V @ 3A
Specifications listed assume 25°C Ambient Operating Temperature and Full Load Operation unlesss otherwise specfified. This product is qualified for use in OEM equipment and is not appropriate for stand-alone operatiuon. The information contained within this specification
is believed to be true and correct at the time of publication, however, Cherokee International accepts no responsiblity for consequences arising from printing errors or inaccuracies. The information and specifications contained herein are subject to change without notice.
Cherokee International (North America)
2841 Dow Avenue
P: (714) 544-6665
Tustin, CA 92780 USA F: (714) 838-4742
Cherokee International (Europe)
Boulevard de l’Europe, 131 P: +32.10.438.510
B-1301 Wavre, Belgium F: +32.10.438.213
Cherokee International (China) Power Supply Ltd.
1353 Chenqiao Road, Shanghai Sengpu Industrial Park
Shanghai, 201401 China
P: 021 6710 8910
cherokeepwr.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet CAP300.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CAP300 | 300W Low Profile Switching Power Supply | Cherokee |
| CAP3001A | Car Audio Processor Hardware |  Micronas |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |