|
|
Número de pieza | SBU6B | |
Descripción | (SBU6x) SILICON SINGLE-PHASE BRIDGE RECTIFIER | |
Fabricantes | Pan Jit International | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SBU6B (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! SBU6A~SBU6M
SILICON SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE 50 to 1000 Volts CURRENT 6.0 Amperes
FEATURES
• Plastic material has Underwriters Laboratory
Flammability Classification 94V-O
• Ideal for printed circuit board
• Reliable low cost construction ulilizing molded pastic technique.
www.DataSheet4•UH.igchomtemperature soldering guaranteed:
260°C/10 seconds/.375"(9.5mm) lead length at 5 lbs. (2.3kg) tension
• In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DATA
• Case: Reliable low cost construction utilizing
• molded plastic technique
• Terminals: Leads solderable per MIL-STD-750, Method 2026
• Mounting position: Any
• Mounting torque: 5 in. lb. Max.
• Weight: 0.2 ounce, 5.6 grams
MAXIMUM RATINGSAND ELECTRICALCHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
PARAMETER
SYMBOL SBU6A SBU6B SBU6D SBU6G SBU6J SBU6K SBU6M UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50 100 200 400 600 800 1000 V
Maximum RMS Bridge Input Voltage
VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage
Maximum Average Forward T =100 OC
C
Rectified Output Current at T =40 OC
A
I2t Rating for fusing ( t<8.3ms)
VD C
IF (AV )
I2 t
50 100 200 400 600 800 1000 V
6.0 A
210 A2sec
Peak Forward Surge Current single sine-wave superimposed on rated
load (JEDEC method)
IF S M
225 Apk
Maximum Forward Voltage Drop per Bridge Element at 6.0A
Maximum Reverse Leakage Current at Rated @ TA=25OC
Dc Blocking Voltage @ TA=100OC
Typical Thermal Resistance per leg (Note 2)
Typical Thermal Resistance per leg (Note 3)
Operating Junction and Storage Temperature Range
VF
IR
RθJ A
RθJ C
TJ,TS TG
0.98
3.0
1000
17.0
3.0
-55 to + 150
Vpk
uA
O C/W
OC
NOTES:
1. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.
2. Units Mounted in free air, no heatsink, P.C.B at 0.375"(9.5mm) lead length with 0.5 x 0.5"(12 x 12mm)copper pads.
3. Units Mounted on a 2.0 x 1.6" x 0.3" thick (5 x 4 x 0.8cm) AL plate.
STAD-JAN.29.2007
PAGE . 1
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet SBU6B.PDF ] |
Número de pieza | Descripción | Fabricantes |
SBU60 | 63W Open Frame Switching Power Supplies | DB Lectro |
SBU61 | 63W Open Frame Switching Power Supplies | DB Lectro |
SBU6A | (SBU6x) General Purpose Diodes | Diotec Electronics Corporation |
SBU6A | (SBU6x) SILICON SINGLE-PHASE BRIDGE RECTIFIER | Pan Jit International |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |