P6SMB1xA Datasheet PDF - Pan Jit International
| Part Number | P6SMB1xA | |
| Description | TVS Diode, SMD (Transient Voltage Suppressor) | |
| Manufacturers | Pan Jit International | |
| Logo |  |
|
|
There is a preview and P6SMB1xA download ( pdf file ) link at the bottom of this page. Total 5 Pages | ||
Preview 1 page No Preview Available !
P6SMB SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE 5.5 to 214 Volts PEAK PULSE POWER 600 Watts
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
www.DataSheet4•UL.coowminductance
• Typical ID less than 1.0µA above 10V
• Plastic package has Underwriters Laboratory
Fammability Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• In compliance with EU RoHS 2002/95/EC directives
SMB/DO-214AA
.185(4.70)
.160(4.06)
Unit: inch (mm)
.012(.305)
.006(.152)
MECHANICAL DATA
• Case: JEDEC DO-214AA ,Molded plastic over passivated junction
• Terminals: Solder plated,solderable per MIL-STD-750,Method 2026
• Polarity: Color band denotes positive end (cathode)
• Standard Packaging:12mm tape (EIA-481)
• Weight: 0.003 ounce, 0.093 gram
.050(1.27)
.030(0.76)
.008(.203)
.002(.051)
.220(5.59)
.200(5.08)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
Rating
Peak Pulse Power Dissipation on 10/1000uS waveform (Notes 1,2, Fig.1)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method) (Notes 2,3)
Peak Pulse Current on 10/1000us waveform(Note 1)Fig.3
Operating Junction and Storage Temperature Range
Symbol
PPPM
IFSM
IPPM
TJ,TSTG
Value
600
100
see Table 1
-55 to +150
Units
Watts
Amps
Amps
OC
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 OC per Fig. 2.
2. Mounted on 5.0mm2 (0.13mm thick) land areas.
3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute
maximum.
STAD-MAY.25.2007
PAGE . 1
|
| |
 
P6SMB SERIES
MOUNTING PAD LAYOUT
www.DataSheet4U.com
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5Kper 7” plastic Reel
LEGAL STATEMENT
Copyright PanJit International, Inc 2007
The information presented in this document is believed to be accurate and reliable. The specifications and information herein
are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit
does not convey any license under its patent rights or rights of others.
STAD-MAY.25.2007
PAGE . 5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for P6SMB1xA electronic component. |
| Information | Total 5 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ P6SMB1xA.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| P6SMB1x | The function is TVS Diode, SMD (Transient Voltage Suppressor). Pan Jit International | |
| P6SMB1xA | The function is ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS. Motorola Semiconductors |  |
| P6SMB1xA | The function is Surface Mount Transient Voltage Suppressor. Taiwan Semiconductor |  |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
P6SM
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||