Datenblatt-pdf.com


CJ1H-CPU6xH-R Schematic ( PDF Datasheet ) - Omron

Teilenummer CJ1H-CPU6xH-R
Beschreibung CPUs
Hersteller Omron
Logo Omron Logo 




Gesamt 18 Seiten
CJ1H-CPU6xH-R Datasheet, Funktion
SYSMAC CJ-series CJ1 CPU Units
CJ1H-CPU6@H-R, CJ1H-CPU6@H, CJ1G-CPU4@H, CJ1M-CPU1@
Introducing the High-speed "-R"
Flagship Models!
• Small! Fast! Flexible!
These machine controllers provide flexible control
for all kinds of applications.
www.DataSheet4U.com
CJ1H-CPU67H-R
CJ1M-CPU12
Features
Compact 90 × 65 mm (H × D) dimensions are first class in the industry.
Provides excellent high-speed control performance, with high-speed processing of 16 ns for LD instructions and 0.24 μs for floating-point
calculations.
A wide range of models is available, from the high-end models (2,560 points and 250K steps of program capacity) to basic models (160 points
and 5K steps).
Other models are available with special functions such as the CJ1M-CPU2@, which provides positioning functions and built-in I/O, and the
CJ1G-CPU4@P.
High-capacity Memory Cards up to 128 MB can be installed, and used to backup the program and system settings, or log customer data.
The large instruction set can support diverse applications. Four types of programming are supported (ladder, structured text, sequential function
charts, and instruction lists), with approximately 400 instructions and 800 instruction variations.
These CJ-series CPU Units support structured programming using function blocks, which can improve the customer's program development
resources.
The various protection functions provide improved security to protect valuable software resources and property.
The CPU Units are compatible with the CX-One Integrated Tool Package. Information for each component can be linked, and the system's data
can be integrated into one database. The software can provide total support from PLC settings to network startup.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
1






CJ1H-CPU6xH-R Datasheet, Funktion
CJ1H-CPU6@H-R/6@H CJ1G-CPU4@H CJ1M-CPU1@
Item
Sending commands to a Host
Link computer
Remote programming and
monitoring
Communicating across network
levels
Storing comments in CPU Unit
Program check
www.DataShCeoent4trUo.lcooumtput signals
Battery life
Self-diagnostics
Other functions
Specifications
FINS commands can be sent to a computer connected via the Host Link System by executing Network Communications
Instructions from the PLC.
Host Link communications can be used for remote programming and remote monitoring through a Controller Link, Ethernet,
DeviceNet, or SYSMAC LINK network.
Remote programming and monitoring from Support Software and FINS message communications can be performed across
different network levels, even for different types of network.
Pre-Ver. 2.0: Three levels
Version 2.0 or later: Eight levels for Controller Link and Ethernet
networks (See note.), three levels for other networks.
Note: To communicate across eight levels, the CX-Integrator or the CX-Net in CX-Programmer version 4.0 or higher must be
used to set the routing tables.
I/O comments can be stored as symbol table files in the Memory Card, EM file memory, or comment memory (see note).
Note: Comment memory is supported for CX-Programmer version 5.0 or higher and CS/CJ-series CPU Units with unit version
3.0 or later only.
Program checks are performed at the beginning of operation for items such as no END instruction and instruction errors.
CX-Programmer can also be used to check programs.
RUN output: The internal contacts will turn ON (close) while the CPU Unit is operating (CJ1W-PA205R).
Battery Set for CJ1-H and CJ1 CPU Units: CPM2A-BAT01
Battery Set for CJ1M CPU Units: CJ1W-BAT01
CPU errors (watchdog timer), I/O bus errors, memory errors, and battery errors.
Storage of number of times power has been interrupted.
(Stored in A514.)
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
6

6 Page









CJ1H-CPU6xH-R pdf, datenblatt
CJ1H-CPU6@H-R/6@H CJ1G-CPU4@H CJ1M-CPU1@
Functions Supported for Unit Version 2.0 or Later
CX-Programmer 4.0 or higher must be used to enable using the functions added for unit version 2.0.
CJ1-H/CJ1M CPU Units
CJ1-H CPU Units
CJ1M CPU Units
Function
(CJ1H-CPU@@H-R)
(CJ1@-CPU@@H)
(CJ1G-CPU@@P)
CJ1M-CPU12/13/22/23
CJ1M-CPU11/21
Unit version
2.0 or later
Other unit
versions
Unit version
2.0 or later
Other unit
versions
Unit version
2.0 or later
Downloading and Uploading Individual Tasks OK
OK
OK
Improved Read Protection Using Passwords OK
OK
OK
Write Protection from FINS Commands Sent
to CPU Units via Networks
OK
OK
OK
www.DataSheet4U.com
Online Network Connections without I/O
Tables
OK
(Supported
if I/O tables are
automatically
generated at startup.)
OK
(Supported
if I/O tables are
automatically
generated at startup.)
OK
Communications through a Maximum of 8
Network Levels
OK
OK
OK
Connecting Online to PLCs via NS-series PTs OK
OK from
lot number 030201
OK
OK from
lot number 030201
OK
Setting First Slot Words
OK for up to
64 groups
OK for up to
8 groups
OK for up to
64 groups
OK for up to
8 groups
OK for up to
64 groups
Automatic Transfers at Power ON without a
Parameter File
OK
OK
OK
Automatic Detection of I/O Allocation Method
for Automatic Transfer at Power ON
OK
OK
OK
Operation Start/End Times OK
OK
OK
MILH, MILR, MILC
OK
OK
OK
=DT, <>DT, <DT, <=DT,
>DT, >=DT
OK
OK
OK
BCMP2 OK
OK OK OK
GRY
OK
OK from
lot number 030201
OK
OK from
lot number 030201
OK
New Application TPO
Instructions
DSW, TKY, HKY, MTR,
7SEG
OK
OK
OK
OK
OK
OK
EXPLT, EGATR, ESATR,
ECHRD, ECHWR
OK
OK
OK
Reading/Writing CPU Bus
Units with IORD/IOWR
OK
OK
OK
PRV2
OK, but only for CPU
Units with built-in I/O
OK, but only for CPU
Units with built-in I/O
User programs that contain functions supported only by CPU Units with unit version 2.0 or later cannot be used on CS/CJ-series Pre-Ver. 2.0 CPU
Units. An error message will be displayed if an attempt is made to download programs containing unit version s.0 functions to a Pre-Ver. 2.0 CPU
Unit, and the download will not be possible.
If an object program file (.OBJ) using these functions is transferred to a Pre- Ver. 2.0 CPU Unit, a program error will occur when operation is started
or when the unit version 2.0 function is executed, and CPU Unit operation will stop.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
12

12 Page





SeitenGesamt 18 Seiten
PDF Download[ CJ1H-CPU6xH-R Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
CJ1H-CPU6xH-RCPUsOmron
Omron

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche