|
|
PDF ACT9353 Data sheet ( Hoja de datos )
| Número de pieza | ACT9353 | |
| Descripción | miniature low profile Clock Oscillator | |
| Fabricantes | Advanced Crystal Technology | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ACT9353 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
ACT9353
Tel: 0044 (0)118 979 1238
Fax: 0044 (0)118 979 1283
E-mail: [email protected]
The ACT9353 is a miniature low profile Clock Oscillator, housed in a ceramic leadless chip
carrier with a SMD seam welded metal lid for high reliability and long term stability. The metal lid
is grounded via the package to assist with EMI emission control. This 5x3.2mm packaged
device is available in 1.8 ~ 5.0 volt supply voltages and with stabilities from ±20ppm to ±100ppm
It is suitable for a wide range of applications. Taped and reeled packaging and loose quantities
are available for purchase, to suit high and low volume requirements. The pads are gold plated
on all surfaces to allow a variety of assembly processes, including reflow and wire bonding
Specification
Parameter
Frequency Range
Frequency Stability
www.DataSheet4U.com
Symbol
f0
Δf/f0
Specification
1.000 to 50.000MHz
±20, ±25, ±50 or ±100ppm
( Inclusive of Operating Temperature,range,Supply Voltage & Load )
Please specify
Please specify
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Topr
Tstg
VDD
Duty Cycle
Tw/t
0 ~ +70°C & -40 ~ +85°C
-55 to +125°C
1.8V, 2.5V, 3.3V & 5.0V
40/60% Std, ( Option 45/55% )
( At 50% of Waveform w/HCMOS Load or 1.4DC w/TTL Load )
Please specify
Please specify
Please specify
1.8VDC±10%
2.5VDC±10%
3.3VDC ±10%
5.0VDC±10%
Supply Current (max)1-12.9999MHz IDD
Supply Current (max)13-34.999MHz IDD
Supply Current (max)35-50MHz
IDD
Output Level ‘0’
VOL
Output Level ‘1’
VOH
Rise & Fall Time (max)
Tr/Tf
Output Load
N/CL
5mA
7mA
7mA
7mA
8mA
15mA
10mA
15mA
25mA
10% VDD max (HCMOS)
90% VDD min (HCMOS)
10nS max
10TTL Load or 15pF HCMOS Load ( Std )
10mA
20mA
30mA
Start-up Time
Tosc
10mS max
Tri-state Input Voltage
Aging
Reflow Profile
Jitter
Fa
No Connection
Enable output
VIH : ≥0.7 VDD
VIL : ≤0.3 VDD
Enable output
Disable output : High Impedance
±5 ppm p/yr. max @25°C
( ±3ppm Available to "custom" order )
10 secs @ 260°C Max
( See page 2 for full profile )
Please refer to table below
fO MHz
Jitter Parameter
Phase 12kHz~20MHz
Typical(pS)
8
Max(pS)
10
1 ~12.999
Period (rms)
10 15
Period (pk-pk)
56 70
Phase 12kHz~20MHz
5
7
13 ~ 34.999
Period (rms)
7 10
Period (pk-pk)
45 60
Phase 12kHz~20MHz
5
7
35 ~ 50.000
Period (rms)
68
Period (pk-pk)
35 50
Pad finish: Au
APPLICATIONS -Microprocessor clock -Audio
-PDA/Notebook
-Ethernet
-Wireless applications -Fibre channel
-Instrumentation
Please note that all parameters can not necessarily be specified in the same device
Customer to Specify : Frequency, Frequency Stability, Operating Temperature Range, Voltage, Duty Cycle
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
Issue : 3 SK
http://www.actcrystals.com
Date 29/10/07
1of 2
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet ACT9353.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ACT9353 | miniature low profile Clock Oscillator | Advanced Crystal Technology |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |