|
|
PDF PT100MF0MP Data sheet ( Hoja de datos )
| Número de pieza | PT100MF0MP | |
| Descripción | Compact Phototransistor in a Surface Mount Package | |
| Fabricantes | Sharp | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PT100MF0MP (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
PT100Mx0MP Series
PT100Mx0MP
Series
s Features
1. Compact and thin package
2. Surface mount type
3. 2-way mounting : top view/side view
4. Reflow soldering
5. Transparent resin : PT100MC0MP
6. Visible light cut-off resin : PT100MF0MP
Pair use with GL100MN0MP/GL100MN1MP
is recommended
www.DataSsheAet4pUp.cliocmations
1. Touch panels for ATM
2. Touch panels for Car navigation system
3. Touch panels for FA equipment
s Absolute Maximum Ratings
(Ta=25˚C)
Parameter
Symbol Rating
Unit
Collector-emitter voltage VCEO
Emitter-collector voltage VECO
35
6
V
V
Collector current
IC 20 mA
Collector power dissipation PC
75 mW
Operating temperature
Storage temperature
*1Soldering temperature
Topr −30 to +85 ˚C
Tstg −40 to +95 ˚C
Tsol 240 ˚C
*1 Max. 10s
Compact, Surface Mount Type
Phototransistor
s Outline Dimensions
3
(Unit : mm)
2.2
1.5
R0.8
(0.56)
(0.56)
(1) 1
2 (1)
12
1 Emitter
2 Collector
Pattern example seeing
from PCB (Side view)
3
1.5
Pattern example seeing
from PCB (Top view)
3
1.5 1.1
1.1 1.1
1.1 (Lens center)
Please pay attention not to make circuit pattern in
g Unspecified tolerance : ±0.2mm
g ( ) : Reference dimensions
Au-plated area
area.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
1 page  
Application Circuits
NOTICE
qThe circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
qContact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
qObserve the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
www.DataSheet4U---.cToemlecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
qContact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
qIf the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
qThis publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
qContact and consult with a SHARP representative if there are any questions about the contents of this
publication.
115
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet PT100MF0MP.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PT100MF0MP | Compact Phototransistor in a Surface Mount Package | Sharp |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |