|
|
PDF G150XG03 Data sheet ( Hoja de datos )
| Número de pieza | G150XG03 | |
| Descripción | XGA Color TFT LCD Module | |
| Fabricantes | AUO | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de G150XG03 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Produktspezifikation für AUO G150XG03 V0
Im Programm von
Achtung:
Dieses Dokument unterliegt nicht dem Änderungsdienst. Der Stand
entspricht der Drucklegung. Bitte informieren Sie sich vor Verwendung
ob die technischen Daten noch dem aktuellen Stand entsprechen. Trotz
sorgfältiger Kontrolle können wir leider keine Haftung für Druckfehler
oder Irrtümer übernehmen.
1 page  
Product Specification
G150XG03 V.0
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open nor modify the Module Assembly.
8) Do not press or pat the panel surface by fingers,hand or tooling.
www.DataSheet4U.com
9) Do not press the reflector sheet at the back of the module to any directions.
10) In case if a module has to be put back into the packing container slot after once it was taken out from the
container, do not press the center of the CCFL reflector edge. Instead, press at the far ends of the CCFL
reflector edge softly. Otherwise the TFT module may be damaged.
11) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT module.
12) After installation of the TFT module into an enclosure (Desktop monitor Bezel, for example), do not twist
nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT module from outside. Otherwise the
TFT module may be damaged.
document ver 0.0
4/31
5 Page 
Product Specification
G150XG03 V.0
Amplitude
DC
Flicker (dB) = 20 log AC Level(at 30 Hz)
DC Level
www.DataSheet4U.com
AC
Time
document ver 0.0
10/31
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet G150XG03.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| G150XG01 | LCD Module | AUO |
| G150XG01-V0 | LCD Module | AUO |
| G150XG01-V1 | LCD Module | AUO |
| G150XG01-V2 | LCD Module | AUO |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |