Datenblatt-pdf.com


R46KWxxxxxx Schematic ( PDF Datasheet ) - Kemet Electronics

Teilenummer R46KWxxxxxx
Beschreibung Metallized Polypropylene Film Capacitor
Hersteller Kemet Electronics
Logo Kemet Electronics Logo 




Gesamt 9 Seiten
R46KWxxxxxx Datasheet, Funktion
www.DataSheet4U.com
Loose
Taped
Fig.1 Fig.2
R.46
X2 CLASS (IEC 60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
Typical applications: interference suppression and
«across-the-line» applications. Suitable for use in situations
where failure of the capacitor would not lead to danger of
electric shock.
PRODUCT CODE: R46
Insulated rigid leads Insulated flexible leads 0.5mm2
Note: R.46 series has replaced the 1.40 series and 1.47 series.
For new design we suggest the use of the R.46 series.
Ø d ±0.05
p 15
0.6 or 0.8*
*See size table.
All dimensions are in mm.
22.5 p 27.5
0.8
p = 37.5
1
Pitch
(mm)
10.0
15.0
15.0
22.5
27.5
37.5
Box thickness (B)
(mm)
All
<7.5
≥7.5
All
All
All
Maximum dimensions (mm)
B max
H max
L max
B +0.2
H +0.1
L +0.2
B +0.2
H +0.1
L +0.3
B +0.2
H +0.1
L +0.5
B +0.2
H +0.1
L +0.3
B +0.2
H +0.1
L +0.3
B +0.3
H +0.1
L +0.3
GENERAL TECHNICAL DATA
test method and performance
Dielectric: polypropylene film.
Damp heat, steady state:
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
electrical characteristics
Rated voltage (VR):
275Vac (50/60Hz) / 560 Vdc
300Vac (50/60Hz) / 630 Vdc
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
56 days
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Capacitance range:
0.01µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C:
* Typical value
10 (6)* at 1kHz
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
1x105 M(5x105 M)*
30000 s (150000 s )*
* Typical value
+25°C±5°C
1 min
100 Vdc
for C0.33µF
for C>0.33µF
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
05/2007
Temperature:
Test duration:
Voltage applied:
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
Winding scheme
158
single sided metallized
polypropylene film






R46KWxxxxxx Datasheet, Funktion
www.DataSheet4U.com
Loose
Taped
Fig.1 Fig.2
R.46S
X2 CLASS (IEC 60384-14) - MKP Series
metallized polyPROPYLENE film capacitor
SELF-HEALING PROPERTIES
Typical applications: This special R46 release is specifically
designed for applications with particular protection against
severe ambient conditions.
PRODUCT CODE: R46
Ø d ±0.05
p 15
0.6 or 0.8*
*See size table.
All dimensions are in mm.
22.5 p 27.5
0.8
p = 37.5
1.0
Pitch
(mm)
10.0
15.0
15.0
22.5
27.5
37.5
Box thickness (B)
(mm)
All
<7.5
≥7.5
All
All
All
Maximum dimensions (mm)
B max
H max
L max
B +0.2
H +0.1
L +0.2
B +0.2
B +0.2
H +0.1
H +0.1
L +0.3
L +0.5
B +0.2
H +0.1
L +0.3
B +0.2
B +0.3
H +0.1
H +0.1
L +0.3
L +0.3
GENERAL TECHNICAL DATA
Dielectric: polypropylene film.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin filled.
Box material is solvent resistant and flame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive flammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
electrical characteristics
Rated voltage (VR):
275Vac (50/60Hz) / 560 Vdc
Capacitance range:
0.022µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C: 15 (8)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
Temperature:
Voltage charge time:
Voltage charge:
Performance
1x105 M(5x105 M)*
30000 s (150000 s )*
* Typical value
+25°C±5°C
1 min
100 Vdc
for C0.33µF
for C>0.33µF
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
test method and performance
Damp heat, steady state:
Test conditions 1st
Temperature:
Relative humidity (RH):
Test duration:
+40°C ± 2°C
93% ±2%
56 days
Test conditions 2nd
Temperature:
Relative humidity (RH):
Test duration:
+60°C ± 2°C
95% ±2%
500 hours
Test conditions 3rd
Temperature:
Relative humidity (RH):
Test duration:
Voltage value:
+40°C ± 2°C
93% ±2%
500 hours
230 Vac, 50 Hz
Performance
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Temperature:
Test duration:
Voltage applied:
Performance
+110°C ± 2°C
1000 h
1.25 x VR +1000Vac 0.1 s/h
Dielectric strength: no dielectric breakdown or
flashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
163 05/2007

6 Page







SeitenGesamt 9 Seiten
PDF Download[ R46KWxxxxxx Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
R46KWxxxxxxMetallized Polypropylene Film CapacitorKemet Electronics
Kemet Electronics

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche