|
|
PDF 307-006 Data sheet ( Hoja de datos )
| Número de pieza | 307-006 | |
| Descripción | CARD EDGE CONNECTOR | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 307-006 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
307/357 SERIES CARD EDGE CONNECTOR
.156" (3.96mm) Contact Spacing
307/357 SERIES ORDERING CODE
Example Part Number 307 - 044 - 520 - 2 02
Series
Total Number of Contacts
Contact Code
Contact Rows
Mounting Options
Series
307
357
Insulator Colour
Green
Black
Total Number of Contacts1
006, 007,...044
012, 014,...088
Contact Rows
Single Row
Dual Row
FEATURES
● CSA Approved and UL Recognized
● .156 (3.96) Contact Spacing x .200 (5.08) Row Spacing
● Accepts .062 (1.57) Nominal Thickness P.C. Board
● Low Profile Insulator Body, .460 (11.68)
● Contact Termination Options include P.C. Tail, Wire Hole,
Wire Wrap, 90 Degree & Extender Board Bends
● Single or Dual Row Configurations
● Large Variety of Mounting Options
● Pre-assembled Card Guides Available
● Accepts Between Contact and In-Contact Polarizing Keys
SPECIFICATIONS
◆ Insulator Material: Thermoplastic Polyester, UL 94V-0
◆ Contact Material: Copper, Nickel, Tin Alloy CA-725
◆ Contact Plating: Gold on the Mating Area, Tin on the
Contact Tails, Nickel Underplate
◆ Current Rating: 5 Amperes Continuous
◆ Contact Resistance: 10 Milliohms Maximum
◆ Dielectric Withstanding Voltage: 1800 V AC rms at Sea Level
Between Adjacent Contacts
◆ Insulation Resistance: 5000 Megohms Minimum
◆ Operating Temperature: -65 to +105 Degrees C
◆ Insertion Force: 16 oz (4.45 N) Maximum per Contact Pair
when Tested with a .070 (1.78) Thick Gauge
◆ Withdrawal Force: 1 oz (0.28 N) Minimum per Contact Pair
when Tested with a .054 (1.37) Thick Gauge
Ordering Code Notes
1) All connector sizes up to 44 contacts single row / 88 contacts
dual row are available upon request.
2) For contacts with overall tin-lead plating, change the first digit
of the contact code from 5 to 4.
3) Single row contacts that read both sides of the daughter
board are phosphor bronze CA-510 material with entire
surface plated gold over nickel.
4) For details of the extender board and 90 degree bends, refer
to page 66.
5) Switching contacts, assembled in specific contact positions,
are available upon request.
6) For details of the mounting options, refer to page 68.
Contact Code 2, 3, 4, 5 Description & Tail Size Tail Length "G"
Single Row Contacts - Read One Side of Daughter Board
505 Wire Hole.087 x .013 (2.21 x 0.33) .282 (7.16)
525 P.C. Tail .046 x .013 (1.17 x 0.33) .213 (5.41)
527 P.C. Tail .046 x .013 (1.17 x 0.33) .358 (9.09)
531 P.C. Tail .023 x .013 (0.58 x 0.33) .213 (5.41)
545 Wire Wrap.046 x .013 (1.17 x 0.33) .708(17.98)
547 Wire Wrap.046 x .013 (1.17 x 0.33) .520(13.21)
558 90 Degree Bend (Code 545 Contacts)
559 90 Degree Bend (Code 527 Contacts)
Single Row Contacts - Read Both Sides of Daughter Board
501 Wire Hole.089 x .014 (2.29 x 0.36) .213 (5.41)
521 P.C. Tail .046 x .014 (1.17 x 0.36) .213 (5.41)
541 Wire Wrap.046 x .014 (1.17 x 0.36) .495(12.57)
553 90 Degree Bend (Code 521 Contacts)
554 90 Degree Bend (Code 501 Contacts)
557 90 Degree Bend (Code 541 Contacts)
Dual Row Contacts - Read Both Sides of Daughter Board
500 Wire Hole.087 x .013 (2.21 x 0.33) .282 (7.16)
520 P.C. Tail .046 x .013 (1.17 x 0.33) .213 (5.41)
522 P.C. Tail .046 x .013 (1.17 x 0.33) .358 (9.09)
524 P.C. Tail .023 x .013 (0.58 x 0.33) .213 (5.41)
540 Wire Wrap.046 x .013 (1.17 x 0.33) .708(17.98)
542 Wire Wrap.046 x .013 (1.17 x 0.33) .520(13.21)
555 Extender Board Bend (Code 500 Contacts)
556 Extender Board Bend (Code 520 Contacts)
558 90 Degree Bend (Code 522 and 540 Contacts)
559 90 Degree Bend (Code 522 and 540 Contacts)
560 Extender Board Bend (Code 522 Contacts)
Contact Rows
1
2
Description
Single Row
Dual Row
Mounting Options6
01
02
03
04
07
08
12
58
68
78
Description
No Mounting Lugs
.128 (3.25) Dia. Mounting Holes
.116 (2.95) I.D. Floating Eyelets
.156 (3.96) Dia. Mounting Holes
M3-0.5 Metric Threaded Inserts
#4-40 Unified Threaded Inserts
.128 (3.25) Dia. Side Mounting Holes
.468 (11.89) Offset Card Guides
.344 (8.74) Offset Card Guides
In-Line Card Guides
Page 40
Tel: (416) 754 - 3322
1 page  
MOUNTINGwww.DataSheet4U.com OPTIONS - CARD EDGE CONNECTORS
Standard Mounting Details
CODE x01 - NO MOUNTING LUGS
q Applicable for 303, 305, 306, 307, 310, 315, 316, 317, 321, 325, 327, 333, 336, 337, 338,
340, 341, 342, 345, 346, 355, 356, 357, 379, 384, 387, 391, 392, 395 and 396 Series
CODE x02, x04 & x09 - THROUGH MOUNTING HOLES
Applicable Series
Code x02
Code x04
Code x09
"A" Dia.
"A" Dia.
"A" Dia.
303, 305, 306, 307, 310, 315, .128 (3.25)
.156 (3.96)
—
316,321, 333, 337, 338, 340,
341, 345,346, 355, 356, 357,
379, 384, 387,391, 395, 396
317, 323
.144 (3.66)
.156 (3.96)
—
325 — — .160 (4.06)
327 — — .163 (4.14)
336
.128 (3.25)
.156 (3.96)
.178 (4.52)
342, 392
.128(3.25) x
.156 (3.96)
—
.146 (3.71)
Slot
CODE x03 - FLOATING EYELETS
Applicable Series
303, 305, 306, 307, 310, 315, 316,
317, 321, 323, 333, 336, 337, 338,
341, 345, 346, 355, 356, 357, 379,
384, 387, 391, 395, 396
342, 392
"A"
.328 (8.33)
.348 (8.84)
CODE x07 & x08 - THREADED INSERTS
q Applicable for 303, 305, 306, 307, 310, 315, 316, 317, 321, 323, 325, 333, 336, 337, 338,
341, 342, 345, 346, 356, 357, 379, 384, 387, 391, 392, 395 and 396 Series
q See Code x12 for Side Mounting Threaded Inserts
CODE x12 - SIDE MOUNTING HOLES
Applicable Series
307, 333, 337, 345, 346, 357, 387,
395, 396
342, 392
"A"
.125 (3.18)
.135 (3.43)
q Series Listed Above based on Availability of 90 Degree Bend Contact Tails.
Side Mounting Holes may also be Used for Other Card Edge Connectors with a
Lug Height of .250 (6.35) or Greater.
q For Side Mounting with Threaded Inserts, Specify Code x17 for M3-0.5 Metric
Threads or Code x18 for #4-40 Unified Threads.
Page 68
Tel: (416) 754 - 3322
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet 307-006.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 307-006 | CARD EDGE CONNECTOR | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |