DataSheet.es    


PDF AP3152 Data sheet ( Hoja de datos )

Número de pieza AP3152
Descripción 120mA HIGH EFFICIENCY WHITE LED DRIVER
Fabricantes Diodes Incorporated 
Logotipo Diodes Incorporated Logotipo



Hay una vista previa y un enlace de descarga de AP3152 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! AP3152 Hoja de datos, Descripción, Manual

www.DataSheet4U.com
AP3152
120mA HIGH EFFICIENCY WHITE LED DRIVER
Features
General Description
Up to 88% Max power efficiency
Wide input voltage range: 2.7V ~ 5.5V
1x, 1.5x, and 2x charge-pump modes
Drive up to 4 white LEDs
120mA maximum output current through 4 channels
Programmable switching frequency, default 1.2MHz
Up Spread Spectrum Control with 10% frequency
deviation
1-wire Serial Digital Interface (SDI) or
PWM for dimming control
Soft-start during power-up and mode
switching
Soft-stop during shutdown
Short-circuit protection
Over-voltage protection and under-voltage lockout
Low quiescent current < 1µA
Industry-leading low profile package
Lead Free package: DFN3030-12
DFN3030-12: Available in “Green” Molding Compound
(No Br, Sb)
Lead Free Finish / RoHS Compliant (Note 1)
The AP3152 is a high efficiency charge-pump white LED driver
with 1x, 1.5x, 2x operating modes. The AP3152 operates on
power supplies from 2.7v to 5.5v. It drives up to four channels of
white LEDs while the intensity of each channel is configured by
varying the respective current levels. Each channel can supply up
to 30mA current. Up to four channels can be ganged together to
provide maximum load current of 120mA.
The Serial Digital Interface (SDI) provides the capability to
configure the current for each LED channel. Some of other key
features, such as Up Spread Spectrum Control, different
charge-pump switching frequencies (0.6MHz/1.2MHz/1.8MHz),
and PWM dimming control, can also be programmed through the
interface.
The AP3152 has built-in soft-start circuit to minimize the inrush
current during power-up and mode switching. Various protections
such as short-circuit, over-voltage, under-voltage, and thermal
shutdown are integrated to ensure system reliability. The
quiescent current of AP3152 during shutdown is less than 1µA.
Applications
Mobile Phone
PDA (Personal Digital Assistant)
White LED Backlighting
Camera Flash LED Lighting
LCD Modules
Portable Devices
Ordering Information
AP 3152 X X X
Package
F : DFN3030-12
Lead Free
G : Green
Packing
-7 : Taping
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
AP3152F
Package Code
F
Packaging
(Note 2)
DFN3030-12
7” Tape and Reel
Quantity
Part Number Suffix
3000/Tape & Reel
-7
Note:
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP3152 Rev. 1
1 of 11
www.diodes.com
SEPTEMBER 2007
© Diodes Incorporated

1 page




AP3152 pdf
www.DataSheet4U.com
AP3152
120mA HIGH EFFICIENCY WHITE LED DRIVER
Electrical Characteristics
CIN = COUT = C1 = C2 = 1.0µF; TA = 25°C, VIN = 3.5V. Unless otherwise stated.
Symbol
Description
Conditions
Min Typ.
IQ
ISHDN
IDX
ID-Match
TSS
FCLK
FSSP
VSDI(L)
VSDI(H)
TSLO
TSHI
fPWM
TPWM
TPLO
TPHI
TOFF
TSEP
ISDI
PD
θJA
θJC
Quiescent Current
Shutdown Current
ISINK Current Accuracy1
Current Matching2
Soft-start Time
Switching Clock Frequency
Spread Spectrum
SDI Threshold Low
SDI Threshold High
SDI Low Time
SDI High Time
PWM Frequency (Range 1)
PWM Frequency (Range 2)
PWM Signal Period
PWM Signal Low (LED off)
PWM Signal High (LED on)
Chip Disable (held low)
Interval between SDI
sequences (held high)
SDI Input Leakage
Maximum Power
Dissipation1
Thermal Resistance1 –
Junction to Ambient
Maximum Thermal
Resistance1 – Junction to
case
1X Mode
Fosc=1.2MHz,
SDI=HIGH, no load
SDI = 0
ISINK = 20mA
VF: D1=D2=D3=D4
Enabled
VIN = 2.7V
VIN = 5.5V
PWM
No PWM
PWM
No PWM
DFN3030-12
(Note 6)
DFN3030-12
(Note 6)
-1
-10
1.6
0.05
0.05
0.2
20
1/
fPWM-Max
1
1
-1
1.2
1
0.6/1.2/1.8
+10
65
512
65
512
0.85
160
21
Note:
4. Determined by the average current levels of all active channels.
5. Defined as the deviation of any sink current from the average of all active current channels
6. Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
Max
1
10
5
0.4
50
50
1.5
30
1/
fPWM-Min
TPWM – 1
TPWM – 1
100
800
100
800
1
Units
mA
µA
%
%
ms
MHz
%
V
V
µs
µs
KHz
KHz
µs
µs
µs
ms
µs
ms
µs
µA
W
°C/W
°C/W
AP3152 Rev. 1
5 of 11
www.diodes.com
SEPTEMBER 2007
© Diodes Incorporated

5 Page





AP3152 arduino
www.DataSheet4U.com
AP3152
120mA HIGH EFFICIENCY WHITE LED DRIVER
Package Information ( unit: mm )
0.10 C
0.08 C
B
R0.3
2.9 / 3.1
2.3 / 2.5
Seating plane
C
A
2x- 0.25 B
0.45typ
0.18/0.28
Bottom View
0.10 M C A B
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
AP3152 Rev. 1
11 of 11
www.diodes.com
SEPTEMBER 2007
© Diodes Incorporated

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet AP3152.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
AP3152120mA HIGH EFFICIENCY WHITE LED DRIVERDiodes Incorporated
Diodes Incorporated
AP3154120mA HIGH EFFICIENCYDiodes
Diodes
AP3154ASmall LCD screen backlighting charge pump LED driversDiodes
Diodes
AP3156HIGH EFFICIENCY 1X/1.5X/2X CHARGE PUMPDiodes
Diodes

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar