Datenblatt-pdf.com


AGQ210S Schematic ( PDF Datasheet ) - NAiS Automation

Teilenummer AGQ210S
Beschreibung Ultra-small Package Flat Polarized Relay
Hersteller NAiS Automation
Logo NAiS Automation Logo 




Gesamt 4 Seiten
AGQ210S Datasheet, Funktion
www.DataSheet4U.com
GQTESTING
ULTRA-SMALL PACKAGE
GQ-RELAYSFLAT POLARIZED RELAY
10.60±0.3
.417±.012
7.20±0.3
.283±.012
5.20±0.2
.205±.008
10.60±0.3
.417±.012
7.20±0.3
.283±.012
Max.5.40
.213
mm inch
FEATURES
• Compact flat body saves space
With a small footprint of 10.6 mm (L) × 7.2
mm (W) .417 inch (L) × .283 inch (W) for
space savings, it also has a very short
height of 5.2 mm .205 inch. (Standard PC
board type.)
• Outstanding surge resistance.
Surge withstand between open contacts:
1,500 V 10×160 µs (FCC part 68)
Surge withstand between contacts and
coil: 2,500 V 2×10 µs (Bellcore)
• The use of twin crossbar contacts en-
sures high contact reliability.
AgPd contact is used because of its good
sulfide resistance. Adopting low-gas
molding material. Coil assembly molding
technology which avoids generating vola-
tile gas from coil.
• Increased packaging density
Due to highly efficient magnetic circuit de-
sign, leakage flux is reduced and changes
in electrical characteristics from compo-
nents being mounted close-together are
minimized. This all means a packaging
density higher than ever before.
• Nominal operating power: 140 mW
• Outstanding vibration and shock re-
sistance.
Functional shock resistance:
750 m/s2 {75G}
Destructive shock resistance:
1,000 m/s2 {100G}
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3
mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm
.197 inch)
SPECIFICATIONS
Contact
Arrangement
2 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1A )
100 m
Contact material
Stationary: AgPd+Au clad
Movable: AgPd
Nominal switching capacity
(resistive load)
1 A 30 V DC
0.3 A 125 V AC
Rating
Max. switching power
(resistive load)
Max. switching voltage
30 W, 37.5 V A
110 V DC, 125 V AC
Max. switching current
Min. switching capacity f1
1A
10 µA 10 mV DC
Nominal
operating
power
Single side stable
1 coil latching
140mW (1.5 to 12 V DC)
230mW (24 V DC)
100mW (1.5 to 12 V DC)
120mW (24 V DC)
Mechanical (at 180 cpm)
5 × 107
Expected
life (min.
operations)
Electrical
(at 20 cpm)
1 A 30 V DC
resistive
0.3 A 125 V AC
resistive
105
105
Remarks:
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 Detection current: 10mA.
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
*5 Half-wave pulse of sine wave: 6 ms;detection time: 10µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10µs.
*8 Refer to 5. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (Page 61)
Characteristics
Initial insulation resistance*1
Min. 1,000M(at 500V DC)
Initial
breakdown
voltage*2
Between open contacts
Between contact sets
Between contacts and coil
750 Vrms for 1min.
1,000 Vrms for 1min.
1,500 Vrms for 1min.
Initial surge
voltage
Between open contacts
(10×160 µs)
Between contacts and coil
(2×10 µs)
1,500 V(FCC Part 68)
2,500 V(Bellcore)
Operate time [Set time]*3 (at 20°C)
Max. 4 ms (Approx. 2 ms)
[Max. 4 ms (Approx. 2 ms)]
Release time (without diode)
[Reset time]*3 (at 20°C)
Max. 4 ms (Approx. 1 ms)
[Max. 4 ms (Approx. 2 ms)]
Temperature rise*4 (at 20°C)
Max. 50°C
Shock resistance
Functional*5
Destructive*6
Min. 750 m/s2{75G]
Min. 1,000 m/s2{100G]
Vibration resistance
Functional*7
Destructive
10 to 55 Hz at double
amplitude of 3.3 mm
10 to 55 Hz at double
amplitude of 5 mm
Conditions for opera- Ambient
tion, transport and temperature f2
storage*8
(Not freezing and con-
densing at low tem- Humidity
perature)
–40°C to 85°C
–40°F to 185°F
5 to 85% R.H.
Unit weight
Approx. 1 g .035 oz
Notes:
f1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
f2 The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable
temperature range is from –40 to +70°C –40° to +158°F.
129





SeitenGesamt 4 Seiten
PDF Download[ AGQ210S Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
AGQ210Ultra-small Package Flat Polarized RelayNAiS Automation
NAiS Automation
AGQ210AUltra-small Package Flat Polarized RelayNAiS Automation
NAiS Automation
AGQ210SUltra-small Package Flat Polarized RelayNAiS Automation
NAiS Automation

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche