Datenblatt-pdf.com


PC410L0NIP Schematic ( PDF Datasheet ) - Sharp Electrionic

Teilenummer PC410L0NIP
Beschreibung High CMR OPIC Photocoupler
Hersteller Sharp Electrionic
Logo Sharp Electrionic Logo 




Gesamt 6 Seiten
PC410L0NIP Datasheet, Funktion
www.DataSheet4U.com
PC410L0NIP
PC410L0NIP
High Speed Response, High
CMR OPIC Photocoupler
s Features
1. High resistance to noise due to high common rejection
voltage (CMR:MIN. 10kV/µs)
2. High speed response (tpLH, tpHL:MAX.75ns)
3. Isolation voltage between input and output
(Viso (rms):3.75kV)
4. Mini-flat package
s Applications
1. Programmable controllers
2. Inverters
s Absolute Maximum Ratings
(Ta=25°C)
Parameter
Symbol Rating Unit
*1 Forward current IF 20 mA
Reverse voltage
VR
5
V
Power dissipation
P
40 mW
Supply voltage
VCC 7
V
High level output voltage VOH
7
V
Low level output current
*2 Collector power dissipation
*3 Isolation voltage
Operating temperature
Storage temperature
*4 Soldering temperature
IOL
PC
Viso (rms)
Topr
Tstg
Tsol
50
85
3.75
40 to +85
40 to +125
270
mA
mW
kV
°C
°C
°C
*1 Refer to Fig.4
*2 Refer to Fig.5
*3 40 to 60%RH, AC for 1minute
*4 For 10s
s Outline Dimensions
6 5 4 1.27±0.25
PC410L
(Unit : mm)
internal connection
diagram
6 54
Anode mark
2.54±0.25
1
0.4±0.1
13
3.6±0.3
C0.4
(Input side)
3
5.3±0.3
0.5−+00..24
7.0−+00..72
1 Anode
3 Cathode
4 GND
5 VO (Open collector)
6 VCC
“OPIC”(Optical IC) is a trademark of the SHARP Corporation.
An OPIC consists of a light-detecting element and signal-
processing circuit integrated onto a single chip.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/






PC410L0NIP Datasheet, Funktion
NOTICE
G The circuit application examples in this publication are provided to explain representative applications of SHARP
devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes
no responsibility for any problems related to any intellectual property right of a third party resulting from the use of
SHARP's devices.
G Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP
reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents
described herein at any time without notice in order to improve design or reliability. Manufacturing locations are
also subject to change without notice.
G Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage
caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used
specified in the relevant specification sheet nor meet the following conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
- - - Personal computers
- -- Office automation equipment
- -- Telecommunication equipment [terminal]
- - - Test and measurement equipment
- - - Industrial control
- -- Audio visual equipment
- -- Consumer electronics
(ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when
SHARP devices are used for or in connection with equipment that requires higher reliability such as:
- -- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
- -- Traffic signals
- - - Gas leakage sensor breakers
- -- Alarm equipment
- -- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of
reliability and safety such as:
- - - Space applications
- -- Telecommunication equipment [trunk lines]
- -- Nuclear power control equipment
- -- Medical and other life support equipment (e.g., scuba).
G If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign
Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices.
G This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright
laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written
permission is also required before any use of this publication may be made by a third party.
G Contact and consult with a SHARP representative if there are any questions about the contents of this publication.

6 Page







SeitenGesamt 6 Seiten
PDF Download[ PC410L0NIP Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
PC410L0NIPHigh CMR OPIC PhotocouplerSharp Electrionic
Sharp Electrionic
PC410L0NIP0FOPIC PhotocouplerSharp
Sharp

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche