|
|
Número de pieza | IDTAS4684 | |
Descripción | DUAL SPDT ANALOG SWITCH | |
Fabricantes | IDT | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de IDTAS4684 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! www.DataSheet4U.com
0.5 OHM, DUAL SPDT ANALOG SWITCH
DATASHEET
IDTAS4684
Description
The IDTAS4684 low on-resistance (RON), low voltage, dual
single-pole/double-throw (SPDT) analog switch operates
from a single +1.8 V to +5.5 V supply. The IDTAS4684
features a 0.5Ω (max) RON for its NC switch and a 0.8Ω
(max) RON for its NO switch at a +2.7 V supply. It also
features break-before-make switching action (2 ns) with
tON = 50 ns and tOFF = 40 ns at +3 V. The digital logic inputs
are 1.8 V logic-compatible with a +2.7 V to +3.3 V supply.
Comes in 3 x 3 DFN, or 12-bump CSP packages.
Applications
• Speaker headset switching
• MP3 players
• Battery-operated equipment
• Audio and video signal routing
• PCMCIA cards
• Cellular phones
• Modems
Features
• +1.8 V to +5.5 V single-supply operation
• Rail-to-rail signal handling
• 1.8 V logic compatibility
• RON match between channels: 0.06Ω (max)
• RON flatness over signal range: 0.15Ω (max)
• NCx Switch RON: 0.5Ω max (+2.7 V Supply) (ICSAS4684)
• NOx Switch RON: 0.8Ω max (+2.7 V Supply)
• Low crosstalk: -68dB (100 kHz)
• High Off-isolation: -64dB (100 kHz)
• THD: 0.03%
• 50 nA (max) supply current
• Low leakage currents: 1 nA (max) at TA = +25°C
• 12-bump, 0.5 mm-Pitch UCSP
• Available in 10-pin DFN and CSP packages
Block Diagram
IDT™ 0.5 OHM, DUAL SPDT ANALOG SWITCH
1
IDTAS4684 REV B 103106
1 page IDTAS4684
0.5 OHM, DUAL SPDT ANALOG SWITCH
ANALOG SWITCH
Parameter
Input Logic HIGH
Input Logic LOW
IN Input Leakage Current
Power Supply Range
Supply Current
Symbol
VIH
VIL
IIN
V+
I+
Conditions
Digital I/O
VIN = 0 or V+
Power Supply
V+ = 5.5 V, VIN = 0 or V+,
Note 3
TA Min. Typ. Max. Units
TMIN to
TMAX
TMIN to
TMAX
TMIN to
TMAX
1.4
-1
V
0.5 V
1 µA
TMIN to
TMAX
+25°C
TMIN to
TMAX
1.8 5.5
-50 +0.04 +50
-200
+200
V
nA
Notes:
1. The algebraic convention used in this data sheet is where the most negative value is a minimum and the most positive value
a maximum.
2. UCSP parts are 100% tested at +25°C only and guaranteed by design and correlation at the full hot-rated temperature.
3. Guaranteed by design.
4. RON = RON(MAX) - RON(MIN), between NC1 and NC2 or between NO1 and NO2.
5. Flatness is defined as the difference between the maximum and minimum value of on resistance as measured over the
specified analog signal ranges.
6. Off-isolation = 20log10 (VCOM / VCO), VCOM = output, VCO = input to off switch.
IDT™ 0.5 OHM, DUAL SPDT ANALOG SWITCH
5
IDTAS4684 REV B 103106
5 Page IDTAS4684
0.5 OHM, DUAL SPDT ANALOG SWITCH
Package Outline and Package Dimensions (12-bump CSP)
Package dimensions are kept current with JESD Publication No. 95-1,
ANALOG SWITCH
IDT™ 0.5 OHM, DUAL SPDT ANALOG SWITCH
11
IDTAS4684 REV B 103106
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet IDTAS4684.PDF ] |
Número de pieza | Descripción | Fabricantes |
IDTAS4684 | DUAL SPDT ANALOG SWITCH | IDT |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |