|
|
Teilenummer | DS4106 |
|
Beschreibung | (DS4106 - DS4425) Clock Oscillators | |
Hersteller | Maxim Integrated Products | |
Logo | ||
Gesamt 7 Seiten www.DataSheet4U.com
Rev 0; 7/07
106.25MHz/212.5MHz/425MHz
Clock Oscillators
General Description
The DS4106, DS4212, and DS4425 ceramic surface-
mount crystal oscillators are part of Maxim’s DS4-XO
series crystal oscillators family. These devices offer out-
put frequencies at 106.25MHz, 212.5MHz, and 425MHz.
The clock oscillators are suited for systems with tight tol-
erances because of the jitter, phase noise, and stability
performance. The small package provides a format
made for applications where PCB space is critical.
These clock oscillators are crystal based and use a fun-
damental crystal with PLL technology to provide the
final output frequencies. Each device is offered with
LVDS or LVPECL output types. The output enable pin is
active-high logic.
These clock oscillators have very low phase jitter and
phase noise. Typical phase jitter is < 0.9psRMS from
12kHz to 20MHz. The devices are designed to operate
with a 3.3V ±5% supply voltage, and are available in a
5.0mm x 3.2mm x 1.49mm, 10-pin LCCC surface-mount
ceramic package.
Applications
Fibre Channel Hard Disk Drives
Host Bus Adapters
Raid Controllers
Fibre Channel Switches
Pin Configuration and Selector Guide appear at end of
data sheet.
Features
♦ Clock Output Frequencies:
DS4106: 106.25MHz
DS4212: 212.50MHz
DS4425: 425.00MHz
♦ Phase Jitter (RMS): 0.9ps Typical
♦ LVPECL or LVDS Output
♦ Supply Current:
50mA (Typical, Unloaded) at +3.3V Supply
(LVPECL)
53mA (Typical) at +3.3V Supply (LVDS)
♦ -40°C to +85°C Temperature Range
♦ Output Disable
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
DS4106AN+
-40°C to +85°C
10 LCCC
DS4106BN+
-40°C to +85°C
10 LCCC
DS4212AN+
-40°C to +85°C
10 LCCC
DS4212BN+
-40°C to +85°C
10 LCCC
DS4425AN+
-40°C to +85°C
10 LCCC
DS4425BN+
-40°C to +85°C
10 LCCC
+Denotes a lead-free package. The lead finish is JESD97
category e4 (Au over Ni) and is compatible with both lead-based
and lead-free soldering processes.
Typical Operating Circuits
VCC
VCC
OE OUTP
DS4106/
DS4212/
DS4425
OUTN
GND
50Ω
VCC - 2V
50Ω
100Ω
LVPECL OPTION
VCC
LVPECL
VCC
VCC
OE OUTP
VCC
DS4106/
DS4212/
DS4425
OUTN
GND
100Ω
LVDS OPTION
LVDS
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
106.25MHz/212.5MHz/425MHz
Clock Oscillators
D RL = 100Ω
DC
OUTP
SINGLE-ENDED
OUTPUT
OUTN
DIFFERENTIAL
OUTPUT
0V (DIFF)
IVODI
VOH
VOS
VOL
+VOD
VODP - P = VOUTP - VOUTN
-VOD
Figure 2. LVDS Level Definitions
Selector Guide
PART
OUTPUTS
FREQUENCY (MHz)
TOP MARK
DS4106AN+
LVPECL
106.25
06A
DS4106BN+
LVDS
106.25
06B
DS4212AN+
LVPECL
212.50
12A
DS4212BN+
LVDS
212.50
12B
DS4425AN+
LVPECL
425.00
42A
DS4425BN+
LVDS
425.00
42B
+Denotes a lead-free package. The lead finish is JESD97 category e4 (Au over Ni) and is compatible with both lead-based and lead-
free soldering processes.
6 _______________________________________________________________________________________
6 Page | ||
Seiten | Gesamt 7 Seiten | |
PDF Download | [ DS4106 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
DS4100H | 100MHz HCSL Clock Generator | Maxim Integrated Products |
DS4106 | (DS4106 - DS4425) Clock Oscillators | Maxim Integrated Products |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |