Datenblatt-pdf.com


GP1A57HRJ00F Schematic ( PDF Datasheet ) - Sharp Electrionic

Teilenummer GP1A57HRJ00F
Beschreibung OPIC Output Case package Transmissive Photointerrupter
Hersteller Sharp Electrionic
Logo Sharp Electrionic Logo 




Gesamt 12 Seiten
GP1A57HRJ00F Datasheet, Funktion
www.DataSheet4U.com
GP1A57HRJ00F
GP1A57HRJ00F
Gap : 10mm, Slit : 1.8mm
*OPIC Output
Case package Transmissive
Photointerrupter
Description
GP1A57HRJ00F is a standard, OPIC output, trans-
missive photointerrupter with opposing emitter and de-
tector in a case, providing non-contact sensing. For this
family of devices, the emitter and detector are inserted in
a case, resulting in a through-hole design.
This device has a wide gap.
Features
1. Transmissive with OPIC output
2. Highlights :
• Vertical Slit for alternate motion detection
• Output Low Level at intercepting optical path
• Wide gap width (10mm)
• Positioning Pin to prevent misalignment
3. Key Parameters :
• Gap Width : 10mm
• Slit Width (detector side) : 1.8mm
• Package : 18.6×15.2×5mm
4. Lead free and RoHS directive compliant
Agency approvals/Compliance
1. Compliant with RoHS directive
Applications
1. General purpose detection of object presence or mo-
tion.
2. Example : Printer, FAX, Optical storage unit
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
Notice The content of data sheet is subject to change without prior notice.
In the absence of conrmation by device specication sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specication sheets before using any SHARP device.
Sheet No.: D3-A03901EN
1 Date Oct. 3. 2005
© SHARP Corporation






GP1A57HRJ00F Datasheet, Funktion
Fig.7 Low Level Output Voltage vs.
Low Level Output Current
1
VCC=5V
Ta=25˚C
GP1A57HRJ00F
Fig.8 Low Level Output Voltage vs.
Ambient Temperature
0.6
VCC=5V
0.5
0.4
0.1
0.01
1
10
Low level output current IOL (mA)
Fig.9 Supply Current vs.
Ambient Temperature
3
100
2.5
0.3
IOL=30mA
0.2
16mA
0.1
5mA
0
25 0 25 50 75 100
Ambient temperature Ta (˚C)
Fig.10 Propagation Delay Time vs.
Forward Current
12
VCC=5V
RL=280Ω
10 Ta=25˚C
tPHL
2 VCC=17V
10V
1.5 ICCL
5V
1
0.5
0
25
VCC=17V
ICCH
10V 5V
0 25 50 75
Ambient temperature Ta (˚C)
100
Fig.11 Rise Time,Fall Time vs.
Load Resistance
0.8
Ta=25˚C
0.7 VCC=5V
IF=7mA
0.6
0.5
0.4 tr
0.3
0.2
0.1
0
0.1
tf
1 10
Load resistance RL (kΩ)
8
6
4
tPLH
2
0
0 10 20 30 40 50 60
Forward current IF (mA)
Fig.12 Test Circuit for Response Time
Input
tr=tf=0.01μs
ZO=50Ω
47Ω
Voltage regulator
(15kΩ)
+5V
280Ω
Output
Amp.
0.01μF
GND
Input
Output
tPLH
tr
50%
tPHL
10%
90% VOH
1.5V
tf VOL
Remarks : Please be aware that all data in the graph are just for reference and not for guarantee.
Sheet No.: D3-A03901EN
6

6 Page









GP1A57HRJ00F pdf, datenblatt
Important Notices
· The circuit application examples in this publication
are provided to explain representative applications of
SHARP devices and are not intended to guarantee any
circuit design or license any intellectual property rights.
SHARP takes no responsibility for any problems related
to any intellectual property right of a third party resulting
from the use of SHARP's devices.
· Contact SHARP in order to obtain the latest device
specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the
specications, characteristics, data, materials, structure,
and other contents described herein at any time
without notice in order to improve design or reliability.
Manufacturing locations are also subject to change
without notice.
· Observe the following points when using any devices
in this publication. SHARP takes no responsibility for
damage caused by improper use of the devices which
does not meet the conditions and absolute maximum
ratings to be used specied in the relevant specication
sheet nor meet the following conditions:
(i) The devices in this publication are designed for use
in general electronic equipment designs such as:
--- Personal computers
--- Ofce automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii) Measures such as fail-safe function and redundant
design should be taken to ensure reliability and safety
when SHARP devices are used for or in connection
GP1A57HRJ00F
with equipment that requires higher reliability such as:
--- Transportation control and safety equipment (i.e.,
aircraft, trains, automobiles, etc.)
--- Trafc signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii) SHARP devices shall not be used for or in
connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.,
scuba).
· If the SHARP devices listed in this publication fall
within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Law of Japan, it
is necessary to obtain approval to export such SHARP
devices.
· This publication is the proprietary product of SHARP
and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be
reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, in whole or in
part, without the express written permission of SHARP.
Express written permission is also required before any
use of this publication may be made by a third party.
· Contact and consult with a SHARP representative
if there are any questions about the contents of this
publication.
[H164]
Sheet No.: D3-A03901EN
12

12 Page





SeitenGesamt 12 Seiten
PDF Download[ GP1A57HRJ00F Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
GP1A57HRJ00FOPIC Output Case package Transmissive PhotointerrupterSharp Electrionic
Sharp Electrionic

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche