|
|
Número de pieza | BLP40 | |
Descripción | Changing the Shape of Power | |
Fabricantes | Power-One | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BLP40 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.DataSheet4U.com
BLP40 AC-DC Series Data Sheet
40 Watts
Features
• RoHS lead-free solder and lead-solder-exempted
products are available
• Industry-standard 3” x 5” footprint
• Main output remote sense
• CE marked to Low Voltage Directive (Pending)
• Compliance to EN61000-4-2/-3/-4/-5/-6/-8
Description
The BLP40 Series’ economical and compact construction provides single or three-output ac-dc power conversion to
meet the requirements of networking and data communications systems, as well as commercial and industrial
configurations.
The BLP40 is rated for convection, as well as forced-air cooling. Full output power is available with external
forced-air cooling. Other features include main-output remote sense and an internal EMI filter.
Single Output Model Selection
MODEL
NOMINAL OUTPUT
VOLTAGE (VDC)
MIN-MAXIMUM OUTPUT
CURRENT, CONVECTION
BLP40-1005
5V
0 to 5A
BLP40-1012
12V
0 to 2.1A
BLP40-1024
24V
0 to 1.1A
MIN-MAXIMUM OUTPUT
CURRENT 1
0 to 8A
0 to 3.3A
0 to 1.8A
PEAK OUTPUT
CURRENT 2
9A
3.7A
1.9A
TOTAL
REGULATION % 3
±2
±2
±2
RIPPLE & NOISE
%p-p 4
1
1
1
Triple Output Model Selection
MODEL
NOMINAL OUTPUT
VOLTAGE (VDC)
MIN-MAXIMUM OUTPUT
CURRENT, CONVECTION
BLP40-3000
+5V
+12V
-12V
0.3 to 3A
0.1 to 1.5A
0.0 to 0.5A
BLP40-3003*
+5V
+15V
-15V
0.3 to 3A
0.1 to 1.5A
0.0 to 0.5A
MIN-MAXIMUM OUTPUT
CURRENT 1
0.3 to 4A
0.1 to 2A
0.0 to 0.7A
0.3 to 4A
0.1 to 2A
0.0 to 0.7A
PEAK OUTPUT
CURRENT 2
5A
3A
1
5A
2.5A
1A
TOTAL
REGULATION % 3
±2
±5
±5
±2
±5
±5
RIPPLE & NOISE
%p-p 4
1
1
1
1
1
1
* Advanced Product Release
NOTES: 1 10 CFM or 150 LFM (average measurement of six equally-distanced points through a 3.5” x 1.6” cross-sectional area) with power supply mounted
on 0.25” standoffs. Recommended airflow direction is from the AC side to the DC side.
2 Peak current duration for less than 30 Sec with a maximum duty cycle of 10%.
3 At 25 °C ambient including voltage set point tolerance, line, and load regulation.
4 Maximum peak-to-peak noise expressed as a percentage of output voltage, 20 MHz bandwidth, and bypass capacitors of 10 μF and 0.1 μF.
Ordering Information:
OPTIONS
RoHS lead-solder exemption
RoHS compliant for all 6 substances
SUFFIXES TO ADD TO PART NUMBER
No RoHS suffix character required.
Add “G” as the last character of the part number.
REV. MAR 31, 2006
Page 1 of 5
www.power-one.com
1 page BLP40 AC-DC Series Data Sheet
40 Watts
Overall Size: 3.00" x 5.00" x 1.23" (76.2mm x 127.0mm x 31.2mm) Weight: 0.51 lb (0.23 kg)
Mechanical Drawing
(Triple-Output Models)
5.00
(127.0)
4.55
(115.6)
3.00
(76.2)
2.55
(64.8)
TOP VIEW
CN1 INPUT
CONNECTOR
SECONDARY GROUND
CN4
PIN #1
SAFETY GROUND CONNECTION POINT #2, FASTON TAB,
0.25", 0.03" THICK
SAFETY GROUND
CONNECTION POINT #1
CN3 - REMOTE SENSE
CONNECTOR
(APPROX. LOCATION)
Ø 0.16 (4 PL)
(4.1)
PIN #1
CN2 - DC OUTPUT
CONNECTOR
(SEE PINOUT
TABLE)
CN1 - AC CONN.
PIN 1
PIN 2
PIN 3
NEUTRAL
MISSING PIN
LINE
CN2 - DC CON
PIN 1 V2
PIN 2 V1
PIN 3 V1
PIN 4 DC COM
PIN 5 DC COM
PIN 6 V3
CN3 - REMOTE SENSE.CON
PIN 1 + SENSE
PIN 2 - SENSE
PIN #1
FASTENER
CLEARANCE AREA
(4 PL)
0.27" DIA
(6.86)
0.06
(1.5)
1.23
(31.2)
SIDE VIEW
1.07
(27.2)
END VIEW
PRINTED CIRCUIT BOARD
0.1
(2.5)
RECOMMENDED MATING CONNECTORS
CN1
CN2
CN3
HOUSING
MOLEX 09-50-8031
LEOCO 3940S030000
MOLEX 09-50-8061
LEOCO 3940S060000
MOLEX 22-01-3027
LEOCO 2530S020000
PIN
08-52-0113
3983TCB0000
08-52-0113
3983TCB0000
08-52-0113
2533TPB0000
NOTE: This is an outline drawing only. The detailed location of components is not shown.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components
in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective
divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
REV. MAR 31, 2006
Page 5 of 5
www.power-one.com
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet BLP40.PDF ] |
Número de pieza | Descripción | Fabricantes |
BLP40 | Changing the Shape of Power | Power-One |
BLP4040 | PN junction Si photocell | SHANGHAI BELLING |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |