|
|
PDF AAM3203 Data sheet ( Hoja de datos )
| Número de pieza | AAM3203 | |
| Descripción | (AAM3202 / AAM3203) DUAL-SPDT CMOS ANALOG SWITCHES | |
| Fabricantes | Andigilog | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AAM3203 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
Preliminary Specification
General Description
The aAM3202 and aAM3203 are precision CMOS
analog dual-SPDT switches or 2:1 multiplexers offering
low on-resistance of less than 4Ω, with better than 0.4Ω
matching between channels and on-resistance flatness
of less than 1.2Ω over the specified analog input voltage
range. The aAM3202 and aAM3203 have very fast turn-
on switching speed of less than 16nS over the full
operating temperature range of -40°C to 85°C. The
aAM3202 and aAM3203 also consume a minimal
amount of power, making them ideal for portable
equipment.
The aAM3202 and aAM3203 connect 1-of-2 inputs to a
common output by control of a select pin in a dual
configuration. The aAM3202 has an inverted switch logic
compared to the aAM3203. The parts are available in a
10-contact leadless QFN package and operate over the
range from 1.8V to 5.5V.
Features (at 5V VDD)
• Low On-Resistance: 4Ω Max
• Guaranteed On-Resistance Match Between
Channels, < 0.4Ω
• Guaranteed Flat On-Resistance Over Specified
Signal Range, < 1.2Ω.
• Turn-On Time: 12nS at 25°C
• Turn-Off Time: 5nS at 25°C
• Break Before Make Interval: 7nS typ
• Temperature Range: -40°C to 85°C
• Uses a Single Supply, 3V to 5V Nominal
Applications
• Mobile Communications
• Computers and Peripherals
• Battery Management
• FAX Machines/Printers/Copiers
• Portable Medical Instruments
aAM3202 / aAM3203
ULTRA LOW POWER, DUAL-SPDT
CMOS ANALOG SWITCHES
PRODUCT SPECIFICATION
Pin Configuration
IN1 1
10 COM1
NO1 2
9 NC1
GND 3 aAM3202 8 VDD
NO2 4
7 NC2
IN2 5
6 COM2
IN1 1
10 COM1
NC1 2
9 NO1
GND 3 aAM3203 8 VDD
NC2 4
7 NO2
IN2 5
6 COM2
Functional Diagrams
IN1
NO1
GND
NO2
IN2
aAM3202
COM1
NC1
VDD
NC2
COM2
IN1
NC1
GND
NC2
IN2
aAM3203
COM1
NO1
VDD
NO2
COM2
Ordering Information
Part Number
aAM3202Q10
aAM3203Q10
Package
10-Lead QFN
10-Lead QFN
Temperature Range
-40˚C to +85˚C
-40˚C to +85˚C
Part Marking
aAM3202
aAM3203
How Supplied
3000 units on T&R
3000 units on T&R
© Andigilog, Inc. 2004
www.andigilog.com
February 2004 – 70A04013_001
1 page  
aAM3202 / aAM3203
Data Sheet Classifications
Preliminary Specification
This classification is shown on the heading of each page of a specification for products that are either under
development (design and qualification), or in the formative planning stages. Andigilog reserves the right to
change or discontinue these products without notice.
New Release Specification
This classification is shown on the heading of the first page only of a specification for products that are either
under the later stages of development (characterization and qualification), or in the early weeks of release to
production. Andigilog reserves the right to change the specification and information for these products without
notice.
Fully Released Specification
Fully released datasheets do not contain any classification in the first page header. These documents contain
specification on products that are in full production. Andigilog will not change any guaranteed limits without
written notice to the customers. Obsolete datasheets that were written prior to January 1, 2001 without any
header classification information should be considered as obsolete and non-active specifications, or in the best
case as Preliminary Specifications.
LIFE SUPPORT POLICY
ANDIGILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF
ANDIGILOG, INC. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b)
support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Andigilog, Inc.
8380 S. Kyrene Rd., Suite 101
Tempe, Arizona 85284-2120
Tel: (480) 940-6200
Fax: (480) 940-4255
© Andigilog, Inc. 2004
-5-
www.andigilog.com
February 2004 – 70A04013
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet AAM3203.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AAM3202 | (AAM3202 / AAM3203) DUAL-SPDT CMOS ANALOG SWITCHES | Andigilog |
| AAM3203 | (AAM3202 / AAM3203) DUAL-SPDT CMOS ANALOG SWITCHES | Andigilog |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |