|
|
Número de pieza | RA45H8994M1 | |
Descripción | RoHS Compliance | |
Fabricantes | Mitsubishi Electric | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RA45H8994M1 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF MOSFET MODULE
RA45H8994M1
RoHS Compliance, 896-941MHz 45W 12.8V, 2 Stage Amp. For MOBILE RADIO
DESCRIPTION
The RA45H8994M1 is a 45-watt RF MOSFET Amplifier
Module for 12.8-volt mobile radios that operate in the 896- to
941-MHz range.
The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate
voltage 1 and the gate voltage 2(VGG1=VGG2=0V), only a small
leakage current flows into the drain and the nominal output
signal (Pout=45W) attenuates up to 60 dB. When fixed i.e. 3.4V, is
supplied to the gate voltage 1, the output power and the drain
current increase as the gate voltage 2 increases. The output
power and the drain current increase substantially with the gate
voltage 2 around 0V (minimum) under the condition when the
gate voltage 1 is kept in 3.4V. The nominal output power
becomes available at the state that VGG2 is 4V (typical) and 5V
(maximum). At this point, VGG1 has to be kept in 3.4V.
At VGG1=3.4V & VGG2=5V, the typical gate currents are 0.4mA.
This module is designed for non-linear FM modulation, but may
also be used for linear modulation by setting the drain quiescent
current with the gate voltages and controlling the output power
with the input power.
BLOCK DIAGRAM
2
3
14
5
1 RF Input added Gate Voltage 1(Pin&VGG1)
2 Gate Voltage 2(VGG2), Power Control
3 Drain Voltage (VDD), Battery
FEATURES
4 RF Output (Pout)
• Enhancement-Mode MOSFET Transistors
(IDD≅0 @ VDD=12.8V, VGG1=VGG2=0V)
www.DataSheet4U.com
• P >45W,out
ηT>33%
@VDD=12.8V, VGG1=3.4V, VGG2=5V, Pin=50mW
• Broadband Frequency Range: 896-941MHz
5 RF Ground (Case)
PACKAGE CODE: H2M
• Metal cap structure that makes the improvements of RF
radiation simple
• Low-Power Control Current IGG1+IGG2=0.4mA(typ) @ VGG1=3.4V, VGG2=5V
• Module Size: 67 x 18 x 9.9 mm
• Linear operation is possible by setting the quiescent drain
current with the gate voltages and controlling the output power
with the input power.
RoHS COMPLIANCE
• RA45H8994M1 is a RoHS compliant product.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the
lead in electronic Ceramic parts.
How ever, it is applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and
fluorescent tubes.
2.Lead in electronic Ceramic parts.
ORDERING INFORMATION:
ORDER NUMBER
RA45H8994M1-101
RA45H8994M1
SUPPLY FORM
Antistatic tray,
10 modules/tray
MITSUBISHI ELECTRIC
1/9
20th Dec 2006
1 page ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF POWER MODULE
RoHS COMPLIANCE RA45H8994M1
OUTLINE DRAWING (mm)
1 RF Input added Gate Voltage 1(Pin & VGG1)
2 Gate Voltage 2(VGG2)
3 Drain Voltage (VDD)
4 RF Output (Pout)
5 RF Ground (Case)
RA45H8994M1
MITSUBISHI ELECTRIC
5/9
20th Dec 2006
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet RA45H8994M1.PDF ] |
Número de pieza | Descripción | Fabricantes |
RA45H8994M1 | RoHS Compliance | Mitsubishi Electric |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |