W3EG72125S-JD3 Datasheet PDF - White Electronic
| Part Number | W3EG72125S-JD3 | |
| Description | 1GB - 2x64Mx72 DDR SDRAM REGISTERED ECC | |
| Manufacturers | White Electronic | |
| Logo |  |
|
|
There is a preview and W3EG72125S-JD3 download ( pdf file ) link at the bottom of this page. Total 14 Pages | ||
Preview 1 page No Preview Available !
White Electronic Designs
W3EG72125S-D3
-JD3
-AJD3
PRELIMINARY*
1GB – 2x64Mx72 DDR SDRAM REGISTERED ECC w/PLL
FEATURES
Double-data-rate architecture
Clock Speeds of 100MHz, 133MHz and 166MHz
Bi-directional data strobes (DQS)
Differential clock inputs (CK & CK#)
Programmable Read Latency 2,2.5 (clock)
Programmable Burst Length (2,4,8)
Programmable Burst type (sequential & interleave)
Edge aligned data output, center aligned data input
Auto and self refresh
Serial presence detect
Dual Rank
Power supply: VCC = 2.5V ± 0.2V
JEDEC standard 184 pin DIMM package
• Package height options:
www.DataSheet4U.com JD3: 30.48mm (1.20") and
AJD3: 28.70mm (1.13")
DESCRIPTION
The W3EG72125S is a 2x64Mx72 Double Data Rate
SDRAM memory module based on 256Mb DDR SDRAM
components. The module consists of eighteen 2x64Mx4
stacked (36 components), in 66 pin TSOP package
mounted on a 184 pin FR4 substrate.
Synchronous design allows precise cycle control with the
use of system clock. Data I/O transactions are possible on
both edges and Burst Lengths allow the same device to be
useful for a variety of high bandwidth, high performance
memory system applications.
* This product is under development, is not qualified or characterized and is subject to
change without notice.
NOTE: Consult factory for availability of:
• RoHS compliant products
• Vendor source control options
• Industrial temperature option
Clock Speed
CL-tRCD-tRP
DDR333 @CL=2.5
166MHz
2.5-3-3
OPERATING FREQUENCIES
DDR266 @CL=2
133MHz
2-2-2
DDR266 @CL=2
133MHz
2-3-3
DDR266 @CL=2.5
133MHz
2.5-3-3
DDR200 @CL=2
100MHz
2-2-2
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
November 2004
Rev. 2
1 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com
|
| |
 
White Electronic Designs
W3EG72125S-D3
-JD3
-AJD3
PRELIMINARY
Parameter
Operating Current
Operating Current
Precharge Power-
Down Standby Current
Idle Standby Current
Active Power-Down
Standby Current
Active Standby Current
Operating Current
Operating Current
Auto Refresh Current
Self Refresh Current
Operating Current
IDD SPECIFICATIONS AND TEST CONDITIONS
0°C ≤ TA ≤ +70°C, VCCQ = 2.5V ± 0.2V, VCC = 2.5V ± 0.2V.
Includes DDR SDRAM components only
Rank 1
Symbol Conditions
IDD0 One device bank; Active - Precharge; tRC
= tRC (MIN); tCK = tCK (MIN); DQ,DM and
DQS inputs changing once per clock cycle;
Address and control inputs changing once
every two cycles.
IDD1 One device bank; Active-Read-Precharge
Burst = 2; tRC = tRC (MIN); tCK = tCK (MIN);
lOUT = 0mA; Address and control inputs
changing once per clock cycle.
IDD2P All device banks idle; Power-down mode;
tCK = tCK (MIN); CKE = (low)
IDD2F CS# = High; All device banks idle;
tCK = tCK (MIN); CKE = High; Address
and other control inputs changing once
per clock cycle. VIN = VREF for DQ, DQS
and DM.
IDD3P One device bank active; Power-Down
mode; tCK (MIN); CKE = (low)
IDD3N CS# = High; CKE = High; One device
bank; Active-Precharge;tRC = tRAS (MAX);
tCK = tCK (MIN); DQ, DM and DQS inputs
changing twice per clock cycle; Address
and other control inputs changing once per
clock cycle.
IDD4R Burst = 2; Reads; Continuous burst; One
device bank active; Address and control
inputs changing once per clock cycle; tCK =
tCK (MIN); lOUT = 0mA.
IDD4W Burst = 2; Writes; Continuous burst; One
device bank active; Address and control
inputs changing once per clock cycle;
tCK = tCK (MIN); DQ,DM and DQS inputs
changing once per clock cycle.
IDD5 tRC = tRC (MIN)
IDD6 CKE ≤ 0.2V
IDD7A Four bank interleaving Reads (BL=4)
with auto precharge with tRC=tRC (MIN);
tCK=tCK(MIN); Address and control inputs
change only during Active Read or Write
commands.
DDR333@CL=2.5
Max
4410
5220
144
1800
1080
2160
5310
5040
6750
144
9540
DDR266:@CL=2, 2.5
Max
3960
4590
144
1620
1080
1800
4950
5220
6210
144
8370
DDR200@CL=2
Max
3960
4590
144
1620
1080
1800
4950
5220
6210
144
8370
Units
mA
Rank 2
Standby
State
IDD3N
mA IDD3N
rnA IDD2P
mA IDD2F
mA IDD3P
mA IDD3N
mA IDD3N
rnA IDD3N
mA IDD3N
mA IDD6
mA IDD3N
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
November 2004
Rev. 2
5 White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for W3EG72125S-JD3 electronic component. |
| Information | Total 14 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ W3EG72125S-JD3.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| W3EG72125S-JD3 | The function is 1GB - 2x64Mx72 DDR SDRAM REGISTERED ECC. White Electronic | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
W3EG
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||