|
|
PDF CAS-xxx Data sheet ( Hoja de datos )
| Número de pieza | CAS-xxx | |
| Descripción | SLIDE SWITCHES | |
| Fabricantes | Copal | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CAS-xxx (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
COPAL ELECTRONICS
SURFACE MOUNT TYPE
CASSLIDE SWITCHES
INTERNAL STRUCTURE
1
5
2
3
s FEATURES
q Compatible with most automatic pick & place machinery
q Compact and space saving SMD type
q Excellent contact stability by twin Au-plated contact
q Low profile design of 2.5 mm
www.DataSheet4U.com
6
4
Part name
1 Cover
2 Slider
3 Housing
4 Slider contact
5 Fixed contact
6 Terminal pin
Material
PPS (Polyphenylenesulphide)
Nylon
PPS (Polyphenylenesulphide)
Flammability
UL-94V-0
Copper alloy, Gold-plated
—
CFCs, Halon, Carbon tetrachloride and designated bromic flame
retardant PBBOs and PBBs are not used in our products.
s PART NUMBER DESIGNATION
CAS-120TB1
Series name
No. of poles
1 : 1 pole
2 : 2 poles
D : Dual (2 separate sliders)
No. of contacts
2 : 2 contacts
Structure
1 : Non-washing type (Seal tape is nothing)
2 : Non-washing type (Seal tape is provided)
Blank : Washable type (Seal tape is provided)
Shape of terminal
A : J-hook
B : Gull wing
Setting position
0 : Top setting
Form of packaging
T : Taping (Reel)
Blank : Bulk in vinyl bags
❈ Please refer to the LIST OF PART NUMBERS when placing orders.
s Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
1 page  
COPAL ELECTRONICS
CAS
SLIDE SWITCHES (SMD)
s SOLDERING CONDITIONS
q Soldering iron
3 s maximum at 300 °C
q Vapor-phase soldering
215 °C, less than 35 s
q Infrared reflow soldering
The temperature profile shown at right is recommended for
reflow soldering. However, process carefully in case of
infrared heater, because the absoription rate of the
object may vary according to its color, material, etc. and
thus heating rate can be different. Please note that the
surface temperature of the product should not exceed
240 ˚C. When the product temperature exceeds 250 °C,
deformation may occur due to heat.
s PACKAGING SPECIFICATIONS
<Taping packaging specifications>
q Taping version is packaged in 1000 pcs. per reel.
Orders will be accepted for units of 1000 pcs., i.e., 1000,
2000, 3000 pcs., etc.
q Taping version is boxed with two reels (2000 pcs.).
3~4 min
Tp
Tm
tm Time
Tp 240 °C (Peak temperature)
Tm 180 °C (Melting point temperature)
tm 10 s (Melting time)
Maximum number of consecutive missing pieces=2
Leader length and reel dimension are shown in the
diagrams below:
q Embossed tape dimensions
q Reel dimensions
(Unit: mm)
Empty
Filled
Empty
End
40 mm min.
Direction of feed
20 pitches min.
Leader
400 mm min.
Head
φ 13±0.2
2±0.5
16.4
+2
0
φ 21±0.8
22.4 max.
q Reel & embossed tape materials
Embossed tape: Plastic
Reel: Paper
q Embossed tape pull strength
10 N {1.02 kgf} minimum
q Peeling strength of seal tape
0.1~0.7 N {10.2~71.4 gf}
{ } : Reference only
q Test method for peeling strength of seal tape
Seal cover tape
165°~180°
Peel direction
(300 mm/min)
Direction of feed
Carrier tape
s Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet CAS-xxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CAS-xxx | SLIDE SWITCHES | Copal |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |