Datenblatt-pdf.com


EL5193 Schematic ( PDF Datasheet ) - Intersil Corporation

Teilenummer EL5193
Beschreibung Single 300MHz Current Feedback Amplifier
Hersteller Intersil Corporation
Logo Intersil Corporation Logo 




Gesamt 19 Seiten
EL5193 Datasheet, Funktion
® NOTSREDEEaCEtOaLM5S1M6hE0/eNEeDLtE51D6F1,OERLN51E6W2/EDLE5S1I6G3NS
EL5193, EL5193A
April 24, 2006
FN7182.3
Single 300MHz Current Feedback
Amplifier with Enable
The EL5193 and EL5193A are current feedback amplifiers
with a bandwidth of 300MHz. This makes these amplifiers
ideal for today’s high speed video and monitor applications.
With a supply current of just 4mA and the ability to run from
a single supply voltage from 5V to 10V, these amplifiers are
also ideal for hand held, portable or battery-powered
equipment.
The EL5193A also incorporates an enable and disable
function to reduce the supply current to 100µA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier.
The EL5193 is offered in the 5 Ld SOT-23 package and the
EL5193A is available in the 6 Ld SOT-23 as well as the
industry-standard 8 Ld SO packages. Both operate over the
industrial temperature range of -40°C to +85°C.
Ordering Information
PART TAPE &
PKG.
PART NUMBER MARKING REEL PACKAGE DWG. #
www.DataSheet4U.comEL5193CW-T7
P
7” 5 Ld SOT-23 MDP0038
(3K pcs)
EL5193CW-T7A P
7” 5 Ld SOT-23 MDP0038
(250 pcs)
EL5193CWZ-T7 BAAW
(Note)
7” 5 Ld SOT-23 MDP0038
(3K pcs) (Pb-free)
EL5193CWZ-T7A BAAW
(Note)
7” 5 Ld SOT-23 MDP0038
(250 pcs) (Pb-free)
EL5193ACW-T7 P
7” 6 Ld SOT-23 MDP0038
(3K pcs)
EL5193ACWZ-T7 BAAV
(Note)
7” 6 Ld SOT-23 MDP0038
(3K pcs) (Pb-free)
EL5193ACS
5193ACS
- 8 Ld SO MDP0027
EL5193ACS-T7 5193ACS
7” 8 Ld SO MDP0027
EL5193ACS-T13 5193ACS
13” 8 Ld SO MDP0027
EL5193ACSZ
(Note)
5193ACSZ
- 8 Ld SO MDP0027
(Pb-free)
EL5193ACSZ-T7 5193ACSZ
(Note)
7” 8 Ld SO MDP0027
(Pb-free)
EL5193ACSZ-T13 5193ACSZ
(Note)
13” 8 Ld SO
(Pb-free)
MDP0027
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• 300MHz -3dB bandwidth
• 4mA supply current
• Single and dual supply operation, from 5V to 10V supply
span
• Fast enable/disable (EL5193A only)
• Available in SOT-23 packages
• Dual (EL5293) and triple (EL5393) available
• High speed, 1GHz product available (EL5193)
• High speed, 6mA, 600MHz product available (EL5192,
EL5292, and EL5392)
• Pb-free plus anneal available (RoHS compliant)
Applications
• Battery powered equipment
• Hand held, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
• Test equipment
• Instrumentation
• Current to voltage converters
Pinouts
EL5193A
(8 LD SO)
TOP VIEW
NC 1
IN- 2
IN+ 3
VS- 4
-
+
EL5193A
(6 LD SOT-23)
TOP VIEW
8 CE
7 VS+
6 OUT
5 NC
EL5193
(5 LD SOT-23)
TOP VIEW
OUT 1
VS- 2
IN+ 3
+-
6 VS+
5 CE
4 IN-
OUT 1
VS- 2
IN+ 3
+-
5 VS+
4 IN-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004, 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.






EL5193 Datasheet, Funktion
EL5193, EL5193A
Typical Performance Curves (Continued)
-3dB Bandwidth vs Supply Voltage for Non-Inverting Gains
400
RF=750Ω
350 RL=150Ω
AV=1
300
250
200 AV=2
150
100 AV=5
50
AV=10
0
5 6 7 8 9 10
Total Supply Voltage (V)
Peaking vs Supply Voltage for Non-Inverting Gains
4
3.5 AV=1
3
RF=750Ω
RL=150Ω
2.5
2
1.5
1 AV=2
0.5
AV=10
0
5 6 7 8 9 10
Total Supply Voltage (V)
Non-inverting Frequency Response (Gain)
SO8 Package
6
2
-2
-6
-10
RF=750Ω
RL=150Ω
-14
1M
AV=5
AV=10
10M
100M
Frequency (Hz)
AV=1
AV=2
1G
-3dB Bandwidth vs Supply Voltage for Inverting Gains
250
200 AV=-1
150 AV=-2
100 AV=-5
50
RF=500Ω
RL=150Ω
0
56
78
Total Supply Voltage (V)
9
10
Peaking vs Supply Voltage for Inverting Gains
2.5
RF=500Ω
RL=150Ω
2
1.5 AV=-1
1
0.5 AV=-2
0
5 6 7 8 9 10
Total Supply Voltage (V)
Non-Inverting Frequency Response (Phase)
SO8 Package
90
AV=1
0
AV=2
-90
-180
-270
RF=750Ω
RL=150Ω
-360
1M
AV=5
AV=10
10M
100M
Frequency (Hz)
1G
6

6 Page









EL5193 pdf, datenblatt
EL5193, EL5193A
Typical Performance Curves (Continued)
JEDEC JESD51-7 HIGH EFFECTIVE
THERMAL CONDUCTIVITY TEST BOARD
1.4
1.2
1 909mW
0.8
0.6
SO8
θJA=110°C/W
0.4
0.2
0
0 25 50 75 85 100 125 150
AMBIENT TEMPERATURE (°C)
JEDEC JESD51-7 HIGH EFFECTIVE
THERMAL CONDUCTIVITY TEST BOARD
0.5
0.45
0.4 435mW
0.35
SOT23-5/6
0.3
0.25
θJA=230°C/W
0.2
0.15
0.1
0.05
0
0 25 50 75 85 100 125 150
AMBIENT TEMPERATURE (°C)
JEDEC JESD51-3 LOW EFFECTIVE
THERMAL CONDUCTIVITY TEST BOARD
1
0.9
0.8
0.7 625mW
0.6
0.5
SO8
θJA=160°C/W
0.4
0.3
0.2
0.1
0
0 25 50 75 85 100 125 150
AMBIENT TEMPERATURE (°C)
JEDEC JESD51-3 LOW EFFECTIVE
THERMAL CONDUCTIVITY TEST BOARD
0.45
0.4 391mW
0.35
0.3
0.25
0.2
θJA =S25O6T°2C3/W-5-6
0.15
0.1
0.05
0
0 25 50 75 85 100 125 150
AMBIENT TEMPERATURE (°C)
12

12 Page





SeitenGesamt 19 Seiten
PDF Download[ EL5193 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EL519High Performance Beam Power TetrodeETC
ETC
EL519Line Output PentodePhilips
Philips
EL5191C1GHz Current Feedback AmplifierElantec Semiconductor
Elantec Semiconductor
EL5191CS1GHz Current Feedback AmplifierElantec Semiconductor
Elantec Semiconductor
EL5191CS-T131GHz Current Feedback AmplifierElantec Semiconductor
Elantec Semiconductor

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche