|
|
PDF EL5177 Data sheet ( Hoja de datos )
| Número de pieza | EL5177 | |
| Descripción | 550MHz Differential Twisted-Pair Driver | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de EL5177 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
®
Data Sheet
May 10, 2007
EL5177
FN7344.4
550MHz Differential Twisted-Pair Driver
The EL5177 is a high bandwidth amplifier with an output in
differential form. It is primarily targeted for applications such
as driving twisted-pair lines or any application where
common mode injection is likely to occur. The input signal
can be in either single-ended or differential form but the
output is always in differential form.
On the EL5177, two feedback inputs provide the user with
the ability to set the device gain (stable at minimum gain of
one.)
The output common mode level is set by the reference pin
(REF), which has a -3dB bandwidth of 110MHz. Generally,
this pin is grounded but it can be tied to any voltage
reference.
Both outputs (OUT+, OUT-) are short circuit protected to
withstand temporary overload condition.
The EL5177 is available in the 10 Ld MSOP package and is
specified for operation over the full -40°C to +85°C
temperature range.
See also EL5174 (EL5177 in 8 Ld MSOP.)
www.DataSheet4U.com
Features
• Fully differential inputs, outputs, and feedback
• Differential input range ±2.3V
• 550MHz 3dB bandwidth
• 1100V/µs slew rate
• Low distortion at 20MHz
• Single 5V or dual ±5V supplies
• 40mA maximum output current
• Low power, 12.5mA typical supply current
• Pb-free plus anneal available (RoHS compliant)
Applications
• Twisted-pair drivers
• Differential line drivers
• VGA over twisted-pair
• ADSL/HDSL drivers
• Single ended to differential amplification
• Transmission of analog signals in a noisy environment
Pinout
EL5177
(10 LD MSOP)
TOP VIEW
FBP 1
10 OUT+
IN+ 2
REF 3
IN- 4
+
-
9 VS-
8 VS+
7 EN
FBN 5
6 OUT-
Ordering Information
PART NUMBER
PART MARKING
TAPE & REEL
PACKAGE
PKG. DWG. #
EL5177IY
3
- 10 Ld MSOP (3.0mm)
MDP0043
EL5177IY-T7
3
7” 10 Ld MSOP (3.0mm)
MDP0043
EL5177IY-T13
3
13” 10 Ld MSOP (3.0mm)
MDP0043
EL5177IYZ (Note)
BAAKA
- 10 Ld MSOP (Pb-free) (3.0mm) MDP0043
EL5177IYZ-T7 (Note) BAAKA
7” 10 Ld MSOP (Pb-free) (3.0mm) MDP0043
EL5177IYZ-T13 (Note) BAAKA
13” 10 Ld MSOP (Pb-free) (3.0mm) MDP0043
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003-2005, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
1 page  
EL5177
Typical Performance Curves (Continued)
AV = 2, RLD = 1kΩ, CLD = 2.7pF
10
9
8
7
6
5 RF = 500Ω
4
3 RF = 200Ω
2
1
0
1M 10M
FREQUENCY (Hz)
RF = 1kΩ
100M
400M
FIGURE 5. FREQUENCY RESPONSE
AV = 2, CLD = 2.7pF, RF = 750Ω
10
9
8
7
6
5 RLD = 500Ω
4
3 RLD = 200Ω
2
1
0
1M 10M
FREQUENCY (Hz)
RLD = 1kΩ
100M
400M
FIGURE 6. FREQUENCY RESPONSE vs RLD
5
4
3
2
1
0
-1
-2
-3
-4
-5
100K
1M 10M
FREQUENCY (Hz)
100M
FIGURE 7. FREQUENCY RESPONSE - VREF
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
10K
PSRR-
PSRR+
100K 1M 10M
FREQUENCY (Hz)
FIGURE 8. PSRR vs FREQUENCY
100M
100
80
60
40
20
0
-20
1K
10K 100K 1M
10M 100M
FREQUENCY (Hz)
FIGURE 9. CMRR vs FREQUENCY
1G
1K
100
EN
10
IN
1
10 100 1K 10K 100K 1M 10M
FREQUENCY (Hz)
FIGURE 10. VOLTAGE AND CURRENT NOISE vs FREQUENCY
5 FN7344.4
May 10, 2007
5 Page 
EL5177
Mini SO Package Family (MSOP)
0.25 M C A B
N
D
A
(N/2)+1
E E1
PIN #1
I.D.
1
B
(N/2)
e
C
SEATING
PLANE
0.10 C
N LEADS
b
H
0.08 M C A B
L1
c
SEE DETAIL "X"
A
MDP0043
MINI SO PACKAGE FAMILY
MILLIMETERS
SYMBOL MSOP8 MSOP10 TOLERANCE NOTES
A
1.10
1.10
Max.
-
A1
0.10
0.10
±0.05
-
A2
0.86
0.86
±0.09
-
b
0.33
0.23
+0.07/-0.08
-
c
0.18
0.18
±0.05
-
D
3.00
3.00
±0.10
1, 3
E
4.90
4.90
±0.15
-
E1
3.00
3.00
±0.10
2, 3
e
0.65
0.50
Basic
-
L
0.55
0.55
±0.15
-
L1
0.95
0.95
Basic
-
N 8 10 Reference -
NOTES:
Rev. D 2/07
1. Plastic or metal protrusions of 0.15mm maximum per side are not
included.
2. Plastic interlead protrusions of 0.25mm maximum per side are
not included.
3. Dimensions “D” and “E1” are measured at Datum Plane “H”.
4. Dimensioning and tolerancing per ASME Y14.5M-1994.
A2
A1
L
DETAIL X
GAUGE
PLANE 0.25
3° ±3°
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
11 FN7344.4
May 10, 2007
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet EL5177.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| EL5170 | (EL5170 / EL5370) 100MHz Differential Twisted-Pair Drivers | Intersil Corporation |
| EL5171 | 250MHz Differential Twisted-Pair Drivers | Intersil Corporation |
| EL5172 | (EL5172 / EL5372) 250MHz Differential Line Receivers | Intersil Corporation |
| EL5173 | 450MHz Differential Twisted-Pair Drivers | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |