Datenblatt-pdf.com


EL5306 Schematic ( PDF Datasheet ) - Intersil Corporation

Teilenummer EL5306
Beschreibung (EL5106 / EL5306) 350MHz Fixed Gain Amplifiers
Hersteller Intersil Corporation
Logo Intersil Corporation Logo 




Gesamt 11 Seiten
EL5306 Datasheet, Funktion
®
Data Sheet
EL5106, EL5306
November 3, 2005
FN7357.4
350MHz Fixed Gain Amplifiers with Enable
The EL5106 and EL5306 are fixed gain amplifiers with a
bandwidth of 350MHz. This makes these amplifiers ideal for
today’s high speed video and monitor applications. They
feature internal gain setting resistors and can be configured
in a gain of +1, -1 or +2.
With a supply current of just 1.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
are also ideal for handheld, portable or battery powered
equipment.
The EL5106 and EL5306 also incorporate an enable and
disable function to reduce the supply current to 25µA typical
per amplifier. Allowing the CE pin to float or applying a low
logic level will enable the amplifier.
The EL5106 is offered in the 6 Ld SOT-23 and the industry-
standard 8 Ld SO packages and the EL5306 is available in
the 16 Ld SO and 16 Ld QSOP packages. All operate over
the industrial temperature range of -40°C to +85°C.
Features
• Pb-free plus anneal available (RoHS compliant)
• Gain selectable (+1, -1, +2)
• 350MHz -3dB BW (AV = 2)
• 1.5mA supply current per amplifier
• Fast enable/disable
• Single and dual supply operation, from 5V to 12V
• Available in SOT-23 packages
• 450MHz, 3.5mA product available (EL5108 & EL5308)
Applications
• Battery powered equipment
• Handheld, portable devices
• Video amplifiers
• Cable drivers
• RGB amplifiers
Ordering Information
PART TAPE &
PART NUMBER MARKING REEL PACKAGE
EL5106IW-T7 t
7” 6 Ld SOT-23
(3K pcs)
EL5106IW-T7A t
7” 6 Ld SOT-23
(250 pcs)
EL5106IWZ-T7 BAFA
(See Note)
7” 6 Ld SOT-23
(3K pcs) (Pb-free)
EL5106IWZ-T7A BAFA
(See Note)
EL5106IS
5106IS
EL5106IS-T7 5106IS
EL5106IS-T13 5106IS
EL5106ISZ
(See Note)
5106ISZ
EL5106ISZ-T7 5106ISZ
(See Note)
EL5106ISZ-T13 5106ISZ
(See Note)
EL5306IS
EL5306IS
7” 6 Ld SOT-23
(250 pcs) (Pb-free)
- 8 Ld SO
7” 8 Ld SO
13” 8 Ld SO
- 8 Ld SO
(Pb-free)
7” 8 Ld SO
(Pb-free)
13” 8 Ld SO
(Pb-free)
- 16 Ld SO
(0.150”)
EL5306IS-T7 EL5306IS
EL5306IS-T13 EL5306IS
7” 16 Ld SO
(0.150”)
13” 16 Ld SO
(0.150”)
PKG.
DWG. #
MDP0038
MDP0038
MDP0038
MDP0038
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
MDP0027
Ordering Information (Continued)
PART TAPE &
PART NUMBER MARKING REEL PACKAGE
PKG.
DWG. #
EL5306ISZ
(See Note)
EL5306ISZ - 16 Ld SO
(0.150”)
(Pb-free)
MDP0027
EL5306ISZ-T7 EL5306ISZ 7” 16 Ld SO
(See Note)
(0.150”)
(Pb-free)
MDP0027
EL5306ISZ-T13 EL5306ISZ 13” 16 Ld SO
(See Note)
(0.150”)
(Pb-free)
MDP0027
EL5306IU
5306IU
- 16 Ld QSOP MDP0040
EL5306IU-T7 5306IU
7” 16 Ld QSOP MDP0040
EL5306IU-T13 5306IU
13” 16 Ld QSOP MDP0040
EL5306IUZ
(See Note)
5306IUZ
- 16 Ld QSOP MDP0040
(Pb-free)
EL5306IUZ-T7 5306IUZ
(See Note)
7” 16 Ld QSOP MDP0040
(Pb-free)
EL5306IUZ-T13 5306IUZ
(See Note)
13” 16 Ld QSOP MDP0040
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2005. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.






EL5306 Datasheet, Funktion
EL5106, EL5306
Typical Performance Curves (Continued)
100
10
1
0.1
10K
100K
1M
10M
FREQUENCY (Hz)
100M
FIGURE 7. OUTPUT IMPEDANCE vs FREQUENCY
1.6
1.55
1.5
1.45
1.4
IS-
IS+
1.35
1.3
1.25
1.2
4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10 10.5 11
VS (V)
FIGURE 8. SUPPLY CURRENT vs SUPPLY VOLTAGE (PER
AMPLIFIER)
0
-10
VS=±5V
AV=2
-20
RL=150
VOP-P=2V
-30
-40
-50
-60
-70
HD3
HD2
-80
-90
0
10 20 30 40 50 60
FREQUENCY (MHz)
FIGURE 9. HARMONIC DISTORTION vs FREQUENCY
CH1 2.00V/DIV
M=100ns
CH2 1.00V/DIV
FIGURE 11. DISABLED RESPONSE
M=100ns
CH1 2.00V/DIV
CH2 1.00V/DIV
FIGURE 10. ENABLED RESPONSE
JEDEC JESD51-3 LOW EFFECTIVE THERMAL
CONDUCTIVITY TEST BOARD
1 909mW
0.9 SO16 (0.150”)
0.8 θJA=110°C/W
0.7 625mW
0.6 633mW
0.5
SO8
θJA=160°C/W
0.4
391mW
0.3
SOT23-6
0.2 θJA=256°C/W
0.1
QSOP16
θJA=158°C/W
0
0 25 50 75 85 100 125
AMBIENT TEMPERATURE (°C)
150
FIGURE 12. PACKAGE POWER DISSIPATION vs AMBIENT
TEMPERATURE
6

6 Page







SeitenGesamt 11 Seiten
PDF Download[ EL5306 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
EL5300200MHz Slew Enhanced VFAIntersil Corporation
Intersil Corporation
EL5302(EL5x0x) Slew Enhanced VFAsIntersil Corporation
Intersil Corporation
EL5304700MHz Slew Enhanced VFAIntersil Corporation
Intersil Corporation
EL5306(EL5106 / EL5306) 350MHz Fixed Gain AmplifiersIntersil Corporation
Intersil Corporation
EL5308(EL5108 / EL5308) 450MHz Fixed Gain AmplifiersIntersil Corporation
Intersil Corporation

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche