|
|
Número de pieza | HD4.7Mxx | |
Descripción | (HD Series) HIGH-FREQ ALUMINUM ELECTROLYTIC | |
Fabricantes | NTE Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de HD4.7Mxx (archivo pdf) en la parte inferior de esta página. Total 1 Páginas | ||
No Preview Available ! HIGH–FREQ ALUMINUM ELECTROLYTIC
HD SERIES
SUBMINIATURE
(Radial Lead, Horizontal Deflection)
The NTE HD series of aluminum electrolytic non–polarized
capacitors are designed specifically for horizontal deflec-
tion current correction where high frequency and high ripple
current occur.
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL–STD 202,
Method 208
Marking:
RATINGS
Capacitance Range: 1.0µf to 10µf
Tolerance: ±20%
Voltage Range: 25 Volts and 50 Volts
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
Consists of series type, nominal capacitance,
rated voltage, temperature range, anode and/or
cathode identification, NTE identification.
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petro-
leum ether, propanol and/or commercial deter-
gents. Halogenated hydrocarbon cleaning
agents such as Freon (MF, TF, or TC), trichloroe-
thylene, trichloroethane, or methylchloride are
not recommended as they may damage the ca-
pacitor.
www.DataSheet4U.com
–25°C to +85°C (–13°F to +185°F)
Leakage Current: I ≤ 0.2CV (measured after
5 minutes of applied rated voltage)
I = Leakage Current (µA)
C = Nominal Capacitance (µf)
V = Rated Voltage (V)
CASE SIZE AND DIMENSIONS:
Insulating
Sleeve
15.0 Min
dØ
A ±0.5
Capacitance Tolerance: ±20% (M)
measured at +20°C (+68°F), 1kHZ
Load Life: 1000 Hrs @ 12V DC, +70°C (+158°F),
at specified ripple current
Leakage Current: Initial specified value or less
Dissipation Factor: < 200% of specified value
Capacitance Change: Within ±15% of initial value
Shelf Life: 500 Hrs @ +85°C (+185°F),
no voltage applied
Leakage Current: Initial specified value or less
Dissipation Factor: < 200% of specified value
Capacitance Change: Within ±15% of initial value
ORDERING INFORMATION
HD 4.7
Series
Capacitance
Tolerance
Voltage
M
50
L’ 5.0 Min
D’ Ø
HD Series Dimensions:
Diameter (D Ø) x Length (L): mm
Capacitance
(µf)
1.0
25V and 50V
12.5 x 20
Ripple Current*
(Ap–p)
2.0
2.2 12.5 x 25
3.0
3.3 16 x 25
4.0
4.7 16 x 31.5 5.0
5.6 16 x 31.5 6.0
6.8 16 x 35.5 7.0
8.2 18 x 35.5 8.0
10.0 18 x 40
9.0
* Allowable ripple current @ 70°C, 12V DC, and 15.75kHZ
HD Mechanical Specs: Dimensions (mm)
Outside Diameter (D Ø)
Lead Spacing (A)
Lead Wire (d Ø)
12.5 16
5.0 7.5
0.6 0.8
18
7.5
0.8
NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com
9
1 page |
Páginas | Total 1 Páginas | |
PDF Descargar | [ Datasheet HD4.7Mxx.PDF ] |
Número de pieza | Descripción | Fabricantes |
HD4.7Mxx | (HD Series) HIGH-FREQ ALUMINUM ELECTROLYTIC | NTE Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |