|
|
Teilenummer | AH173 |
|
Beschreibung | INTERNAL PULL-UP HALL EFFECT LATCH | |
Hersteller | Diodes Incorporated | |
Logo | ||
Gesamt 9 Seiten AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Features
• Bipolar Hall Effect Latch Sensor
• 3V to 20V DC Operation Voltage
• Built-in Pull-Up Resistor
• 25mA Output Sink Current
• Operating Temperature: −40°C ~ +125°C
• Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
• Lead Free Package: SIP-3L, SC59-3L
• Green Package: SC59-3L
General Description
AH173 is a single-digital-output Hall-effect sensor with pull-up
resistor for high temperature operation. The device includes an
on-chip Hall voltage generator for magnetic sensing, an amplifier
to amplify Hall voltage, and a comparator to provide switching
hysteresis for noise rejection, and an output driver with a pull-up
resistor (Rpu). An internal band-gap regulator is used to provide
temperature compensated supply voltage for internal circuits and
allows a wide operating supply range. While the magnetic flux
density (B) is larger than operate point (Bop), the OUT pin turns
on (low). If B moves toward release point (Brp), the OUT pin is
latched “on” state prior to B < Brp. When B < Brp, the OUT pin
goes into “off ” state.
Applications
• Rotor Position Sensing
• Current Switch
• Encoder
• RPM Detection
Ordering Information
AH 173 - X X X - X
Package
P: SIP-3L
W: SC59-3L
Lead-Free
Packing
Magnetic
Characteristics
L : Lead Free
-7 : Taping
G : Green (Note3) -B : Bulk (Note 4)
- A : Ammo Box (Note 5)
A or B
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device Package Packaging
Code (Note 2)
AH173-P
Lead-free
AH173-W
P
W
SIP3-3L
SC59-3L
Tube/Bulk
Quantity
Part
Number
Suffix
1000
-B
NA NA
7” Tape and Reel
Quantity
Part
Number
Suffix
NA NA
3000/Tape & Reel
-7
Ammo Box
Quantity
Part
Number
Suffix
4000/Box
-A
NA NA
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
3. Green is only available for SC59-3L
4. Bulk is for SIP-3 Straight Lead.
5. Ammo Box is for SIP-3 Spread Lead.
AH173 Rev. 4
1 of 9
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH173
INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH
TEMPERATURE
Marking Information
(1) SC59-3L
(Top View)
3
XX Y M X
12
XX : J3: AH173
Y : Year 0~9
M : Month A~L
X : Internal code a~z: Lead Free
A~Z: Green
Part Number Package Identification Code
AH173 SC59-3L
J3
(2) SIP-3L
(Top View)
173
Y WW X
Y : Year: “1”=2001
“2”=2002
WW: Nth Week 01~52
X : Internal code
a~z: Lead Free
Package Information
(1) Package Type: SIP-3L for Bulk pack
0.51m m
NOM
BRANDED
SURFACE
Active Area Depth
2.00m m
1.15m m
1 23
Sensor Location
AH173 Rev. 4
6 of 9
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
6 Page | ||
Seiten | Gesamt 9 Seiten | |
PDF Download | [ AH173 Schematic.PDF ] |
Teilenummer | Beschreibung | Hersteller |
AH173 | INTERNAL PULL-UP HALL EFFECT LATCH | Diodes Incorporated |
AH174 | Inverted Output Hall Effect Latch | Anachip |
AH175 | HALL EFFECT LATCH | Diodes Incorporated |
AH175 | Hall Effect Latch | ANACHIP |
AH1751 | HALL EFFECT LATCH | Diodes Incorporated |
Teilenummer | Beschreibung | Hersteller |
CD40175BC | Hex D-Type Flip-Flop / Quad D-Type Flip-Flop. |
Fairchild Semiconductor |
KTD1146 | EPITAXIAL PLANAR NPN TRANSISTOR. |
KEC |
www.Datenblatt-PDF.com | 2020 | Kontakt | Suche |