Datenblatt-pdf.com


RCT02 Schematic ( PDF Datasheet ) - Unisonic Technologies

Teilenummer RCT02
Beschreibung Encoder
Hersteller Unisonic Technologies
Logo Unisonic Technologies Logo 




Gesamt 11 Seiten
RCT02 Datasheet, Funktion
UNISONIC TECHNOLOGIES CO., LTD
RCT02
ENCODER FOR REMOTE
CONTROLLER WITH FIVE
FUNCTIONS
CMOS IC
DESCRIPTION
DIP-14
The chip can be used with the decoder UTC RCR02 to provide a
complete control functions to the remote-controlled toy. The UTC
RCT02 has five input pins corresponding with the five function
buttons i.e, forward, backward, rightward, leftward and turbo. The
encoding circuit in the UTC RCT02 sends digital codes to the two
output pins SO and SC. The digital codes correspond to the definite
function buttons or their combinations. The SO and SC outputs are
used in wireless and infra-red applications respectively.
SOP-14
There is an internal oscillator in the UTC RCT02. By adding an external resistor conveniently, the oscillator will be
constructed. The oscillator frequency can be adjusted by the external resistor. The relative error between the
frequencies of the two on chip oscillators in the UTC RCT02 and UTC RCR02 must be less than ±25%.
The auto-power-off function is achieved by an internal counter. When the UTC RCT02 is powered on, the counter
is reset and begin to count. Any action of push down or release the function button also reset the counter. The PC
pin will keep on a high level until the counter counts up to about 4 minutes. The PC output is used to control on/off
state of the external power supply. Pressing OFF button can also shut down the power supply. Press on any function
button will wake up the chip promptly.
FEATURES
*Five input pins used for five control buttons
*Operating power-supply voltage range: 2.5 ~ 5.0V
*Auto-power-off if no press on any button in 4 minutes or
continuously press on any button over 4 minutes
*Manual-power-on/off with ON/OFF button
*One output pin used for external power control
*Press on any button as wake up
*On-chip oscillator with an external resistor
*Low operating current
*Few external components needed
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
RCT02L-D14-T
RCT02G-D14-T
RCT02L-S14-T
RCT02G-S14-T
RCT02L-S14-R
RCT02G-S14-R
Package
DIP-14
SOP-14
SOP-14
Packing
Tube
Tube
Tape Reel
www.unisonic.com.tw
Copyright © 2013 Unisonic Technologies Co., Ltd.
1 of 11
QW-R502-002. D






RCT02 Datasheet, Funktion
RCT02
BLOCK DIAGRAM OF APPLICATION CIRCUIT (1)
CMOS IC
5~12V
1 RIGHTB
2 TESTB
3
GND
LEFTB 14
OFF 13
OSCI 12
4 BACK
OSCO 11
5 FOR
6
TURBOB
7 SC
PC 10
VDD
SO
9
8
UTC RCT02
POWER
OFF
+
RF
TRANSMITTER
Note: 1.The power supply for above circuit should be 5.0V ~ 12V.
2. This circuit is for wireless application.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 11
QW-R502-002. D

6 Page







SeitenGesamt 11 Seiten
PDF Download[ RCT02 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
RCT02EncoderUnisonic Technologies
Unisonic Technologies

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche