Datenblatt-pdf.com


RA60H4047M1 Schematic ( PDF Datasheet ) - Mitsubishi Electric

Teilenummer RA60H4047M1
Beschreibung RF MOSFET MODULE
Hersteller Mitsubishi Electric
Logo Mitsubishi Electric Logo 




Gesamt 9 Seiten
RA60H4047M1 Datasheet, Funktion
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF MOSFET MODULE
RA60H4047M1
RoHS Compliance, 400-470MHz 60W 12.5V, 2 Stage Amp. For MOBILE RADIO
DESCRIPTION
The RA60H4047M1 is a 60-watt RF MOSFET Amplifier
Module for 12.5-volt mobile radios that operate in the 400- to
470-MHz range.
The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate
voltage (VGG=0V), only a small leakage current flows into the
drain and the nominal output signal (Pout=60W) attenuates up to
60 dB. The output power and the drain current increase as the
gate voltage increases. The output power and the drain current
increase substantially with the gate voltage around 0V(minimum).
The nominal output power becomes available at the state that
VGG is 4V (typical) and 5V (maximum).
At VGG=5V, the typical gate currents are 5mA.This module is
designed for non-linear FM modulation, but may also be used for
linear modulation by setting the drain quiescent current with the
gate voltage and controlling the output power with the input
power.
FEATURES
• Enhancement-Mode MOSFET Transistors
(IDD0 @ VDD=12.5V, VGG=0V)
• Pout>60W, ηT>40% @ VDD=12.5V, VGG=5V, Pin=50mW
• Broadband Frequency Range: 400-470MHz
• Metal shield structure that makes the improvements of spurious
radiation simple
• Low-Power Control Current IGG=5mA (typ) @ VGG=5V
• Module Size: 67 x 18 x 9.9 mm
• Linear operation is possible by setting the quiescent drain
current with the gate voltages and controlling the output power
with the input power.
BLOCK DIAGRAM
2
3
14
5
1 RF Input (Pin)
2 Gate Voltage (VGG), Power Control
3 Drain Voltage (VDD), Battery
4 RF Output (Pout)
5 RF Ground (Case)
PACKAGE CODE: H2M
RoHS COMPLIANCE
• RA60H4047M1 is a RoHS compliant product.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the
lead in electronic Ceramic parts.
However, it is applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and
fluorescent tubes.
2.Lead in electronic Ceramic parts.
ORDERING INFORMATION:
ORDER NUMBER
RA60H4047M1-101
SUPPLY FORM
Antistatic tray,
10 modules/tray
RA60H4047M1
MITSUBISHI ELECTRIC
1/9
3rd Mar 2008






RA60H4047M1 Datasheet, Funktion
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
TEST BLOCK DIAGRAM
MITSUBISHI RF POWER MODULE
RoHS COMPLIANCE RA60H4047M1
Power
Meter
DUT
5
12
34
Spectrum
Analyzer
Signal
Generator
Attenuator
Pre-
Attenuator
amplifier
Directional
Coupler
Z G=50
C1
C2
ZL=50
Directional Attenuator Power
Coupler
Meter
C1, C2: 4700pF, 22uF in parallel
EQUIVALENT CIRCUIT
-+
DC Power
Supply VGG
+-
DC Power
Supply VDD
1 RF Input (Pin)
2 Gate Voltage (VGG)
3 Drain Voltage (VDD)
4 RF Output (Pout)
5 RF Ground (Case)
3
1
2
RA60H4047M1
MITSUBISHI ELECTRIC
6/9
4
5
3rd Mar2008

6 Page







SeitenGesamt 9 Seiten
PDF Download[ RA60H4047M1 Schematic.PDF ]

Link teilen




Besondere Datenblatt

TeilenummerBeschreibungHersteller
RA60H4047M1RF MOSFET MODULEMitsubishi Electric
Mitsubishi Electric

TeilenummerBeschreibungHersteller
CD40175BC

Hex D-Type Flip-Flop / Quad D-Type Flip-Flop.

Fairchild Semiconductor
Fairchild Semiconductor
KTD1146

EPITAXIAL PLANAR NPN TRANSISTOR.

KEC
KEC


www.Datenblatt-PDF.com       |      2020       |      Kontakt     |      Suche