|
|
Número de pieza | PM8311 | |
Descripción | High Density T1/E1 Framer | |
Fabricantes | PMC-Sierra | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PM8311 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! www.DataSheet4U.com
PM8311 TEMUX 168
High Density T1/E1 Framer, VT/TU Mapper & M13 Mux with
Integrated SONET/SDH Framers
Preliminary
Product Brief
PRODUCT OVERVIEW
The PM8311 TEMUX 168 is a single device integrating 2xOC-3/STM-1
SONET/SDH framers for working and protect links, 168/126 T1/E1
framers, 6 DS3/E3 framers, 6 M13/G.747 multiplexers and 6 VT/TU
mappers.
Designed for lower-density applications than its PM8310 TEMUX 336
counterpart, the TEMUX 168 device also interfaces seamlessly with a
broad range of PMC-Sierra solutions. The TEMUX 168 includes the
Extended Serial SONET/SDH interface (ESSI), enabling:
• A low pin-count interconnect to additional TEMUX 168 devices
• SONET/SDH cross-connects in transport applications
• Ethernet over SONET/SDH mappers such as the PMC-Sierra PM4390
ARROW M8xFE
The device also includes the SBI bus, which enables simple intercon-
nects with PMC-Sierra Layer 2 solutions.
The TEMUX 168 is fully hardware and software compatible with the
TEMUX 336.
BENEFITS
• Complete SONET/SDH front end with T1/E1, DS3/E3
framers/mappers/multiplexers on a single-chip that meets
ATCA/AMC space and power constraints.
• Integrated SBI bus simplifies interconnection to layer 2 processors
• Meets timing requirements for wireless backhaul, critical for CES-
based PWE3 applications, by enabling independent timing for all
168/128 T1/E1s across the SBI using the V4 byte
• Extended Serial SONET/SDH Interface (ESSI) can aggregate up to
2xOC-3/STM-1 on a single 4-wire interface, enabling equipment
protection in ACTA/AMC systems.
• Supports linear 1+1 protection on the same device or to a
companion TEMUX 168
• Enables a scalable architecture from T1/E1 up to OC-12/STM4
• Supports T1/E1 mapping directly into SONET/SDH using V1.5/TU-11
or VT2/TU-12 or multiplexed DS3s using M13 or G.747
• Supports advanced test features including programmable pattern
generation and detection for up to 64 byte sequences
• Fully integrated, monolithic IC ensures reliability
PRODUCT HIGHLIGHTS
• 4 OC-3/STM-1 SONET/SDH framers
• 168 T1/126 E1 framers
• 6 M13 multiplexers, including support for G.747 multiplexing
• 6 DS3/E3 framers
• High order path processor for a SONET STS-3 or an SDH STM-1
• Tributary path processor for 168 VT1.5/TU-11s or 126 VT2/TU-12s
• Byte synchronous and bit asynchronous mapper for 168 VT1.5/TU-
11s or 126 VT2/TU-12s
• Tributary path processor for 6 TU-3s
• Mapper for 6 DS3s or 6 E3s (TU-3 and AU-3)
BLOCK DIAGRAM
to DS3/E3 LIU
OC-3
OC-3
622M ESSI
622M ESSI
OC-3
OC-3
SONET/SDH
Transmitter
(w+p)
Tx ESSI
(w+p)
Rx ESSI
(w+p)
SONET/SDH
Framer
(w+p)
STS-1
Switch
HO/LO
Pointer
Processor
SONET/
SDH
Mapper
to DS3/E3 LIU
DS3 M13
Tran Mux
T1/E1 Tran
DS3 M13
Frmr DMux
T1/E1 Frmr
Tx System
Interface
(SBI,
SBI-TR,
H-MVIP)
Rx System
Interface
(SBI,
SBI-TR,
H-MVIP)
SBI, SBI-TR or
32M H-MVIP
SBI, SBI-TR or
32M H-MVIP
PMC-2060577, Issue 1
© Copyright PMC-Sierra, Inc. 2006
All rights reserved. Proprietary and Confidential to PMC-Sierra, Inc. and for its customers’ internal use.
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet PM8311.PDF ] |
Número de pieza | Descripción | Fabricantes |
PM8310 | High Density T1/E1 Framer | PMC-Sierra |
PM8311 | High Density T1/E1 Framer | PMC-Sierra |
PM8312 | High Density 32-Channel T1/E1/J1 Framer | PMC Sierra |
PM8313 | M13 Multiplexer/Demultiplexer | PMC-Sierra |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |